4-1/2" Cordless Angle Grinder No. W18LTX

4-1/2" Cordless Angle Grinder No. W18LTX

4-1/2

The Metabo 4-1/2" Cordless Angle Grinder, No. W18LTX, is part of Metabo’s PowerMasterSeries of 18V lithium-ion cordless power tools. Safety features include advanced motor protection with a no-volt release switch that protects against unintentional starts when inserting a battery, a burst-proof guard that can be adjusted in seconds without tools, and an electronic shut off that helps to prevent kick-back. Added features include thermal overload protection and an electronic soft start that helps extend motor life. Metabo’s proven air-cooled charging technology cools the battery pack to a level temperature during charging using guided air flow ducting. The W18LTX has a no-load speed of 8,000 rpm.

Expand for more details on this Product

18V LXT Lithium-Ion Cordless Compact Band Saw, No. XBP01

Product From Makita

The Makita 18V LXT Lithium-Ion Cordless Compact Band Saw, No. XBP01, is powered by one 18V LXT battery that reaches a full charge in only 30 minutes. It has a blade cover to enable appropriate one-handed operation, and it has a 630 ft-per-minute blade speed for fast, efficient cutting. The saw accepts standard 32-7/8" by 1/2" blades, and with a 2-1/2" cutting capacity, it is able to cut conduit, Unistrut, copper pipe, threaded rod, angle iron and channel. Additional features include a built-in LED, "tool-less" blade change, and adjustable foot to protect material and provide improved support for more accurate cutting.The band saw weighs only 7.5 lbs.

Get Info Now

Cable Shears, No. 95 11 165

Product From KNIPEX Tools LP

Knipex's Cable Shears, No. 95 11 165, features precision ground, hardended blades, high-grade special tool steel that is forged and oil-hardened, and has an adjustable bolted joint with a self-retaining screw. The tool produces clean and smooth cut without crushing and deformation. Its easy-cutting ability allows for one-handed operation and allows for cutting copper and aluminum single conductors as well as multiple stranded cables. These shears should be used on steel wire or hard drawn copper conductors.

Get Info Now

5-Axis Water Jet System, No. EDGE X-5

Product From Jet Edge Inc.

The Jet Edge 5-axis water jet system, No. EDGE  X-5, cuts complex taper-free and 3D parts from virtually any material. Featuring Jet Edge's Permalign EDGE technology, the machine can cut chamfers, weld bevels and sophisticated 3D parts such as impeller blades. The AquaVision Di Controller's open architecture design gives operators the freedom to fine-tune programs from any CAD/CAM/nesting software, utilizing standard G&M code. The system's Intelligent Work Envelope automatically adjusts depending on the angle of the cut to protect the operator, material and system components. This machine comes in an array of sizes and is made in the U.S.A.

Get Info Now

Ratcheting Tube Cutter, No. 331

Product From Beta Tools

The Beta Tools Ratcheting Tube Cutter, No. 331, comes as a ratcheting tube cutter that allows the user to cut tubing that is located in tight spaces. Traditional tube cutters require the user to spin the tool around the tubing which can be nearly impossible when other mechanicals are in the way. With the No. 331, the user simply opens the end to place the tubing inside the tool, and then tighten the thumbscrew and ratchet.

Get Info Now

TKO Carbide Tipped Hole Cutters

Product From Ideal Industries, Inc.

Ideal Industries offers the TKO Carbide Tipped Hole Cutters. These cutters act as a clean cutter replacement for traditional knockouts, by making smooth holes in a fraction of the time at a fraction of the cost. Specifically designed to cut sheet metal, TKO cutters will even cut stainless steel with fine grained, carbide tips. The innovative design includes the exclusive SmoothStart replaceable pilot drill, which guides the cutter to the surface, avoiding cutter damage and providing smoother holes. An integral overdrill flange prevents cutter penetration beyond the sheet metal.

Get Info Now

Delta Cap Cutter Premium Grinding Wheel

Product From Goodson Tools and Supplies

Goodson's Delta Cap Cutter Premium Grinding Wheel comes specifically designed to fit the Delta Cap Cutter model 6200XHD. It has a 7" OD, 5-1/2" ID and comes 1-1/2" thick." The abrasive is plate counted and balanced for smooth grinding. It can be used on welded main caps.

Get Info Now

Valve Seat Grinding Wheels

Product From Goodson Tools and Supplies

Goodson's Valve Seat Grinding Wheels provide stones from 1/2" diameter all the way up to 5" diameter using a Nickel Chrome abrasive formula. These larger stones can also be purchased in General Purpose and Cool Blue formula.

Get Info Now

8" Cable Shear

Product From KNIPEX Tools LP

The Knipex 8" Cable Shear, with a twin cutting edge, can cut through copper and aluminum cables.  This tool features precision ground, hardened blades that can accomplish a clean and smooth cut without crushing and deformation. The user does not need to exert as much effort, because the tool features a favorable lever ratio and optimized cutting-edge geometry. It has a guard that prevents pinching the user's finger and its twin cutting edge allows a comfortable handle position in all cutting situations within its specified cutting capacity.

Get Info Now

Super Combo Scissors

Product From Vampire Tools International, Inc.

Vampire's Super Combo Scissors can cut through steel and cooper. These 4-in-1 multi-purpose compact scissors benefit from being made in Japan of carbon steel. They come with an ergonomic S-shaped handle that prevents pinching of the palm and provide maximum leverage to the blades. These scissors have the flat blade design for standard cutting. Also equipped on the inside one of the blades are micro-serrations that give the user the non-slip ability to cut through rope and insulated cables. Opposite of that is the double-sided blade that can be used as a straight-edged knife, like a box-cutter.  

Get Info Now

Premium Quickie Cut Cut-Off Wheels

Product From CGW Green Grind

CGW, Camel Grinding Wheels' Premium Quickie Cut Cut-Off Wheels for use with metals, including stainless steel expands CGW's existing Quickie Cut line of cut-off wheels. The flexible cut-off wheels cut 14 percent more than the best-producing cut-off wheels in the same category, accordingt to the manufacturer. Designed for enhanced free-cutting action, the wheels require less effort while eliminating the wheel sticking in aggressive work pieces. In addition, the wheels reduce stress on the work piece by causing minimal burning, and reduce the need for extra cleaning and/or deburring.

Get Info Now