Fuse Block Adapter Kit, No. 596

Fuse Block Adapter Kit, No. 596

Fuse Block Adapter Kit, No. 596 Product Image

Thexton announced the reissue of a long standing product, replacing the THX 441X Fuse Block Adapter Kit with the THX 596 Fuse Block Adapter Kit. The THX 596 provides easy, professional way to test fuse block circuits. Technicians can test fuse boxes using ATO, Mini and Maxi fuses. Adapters access the power source to check for voltage, opens, shorts and amperage draws. Comes with nylon connectors and plated contacts.

 

Expand for more details on this Product

Flexible DMM Test Accessory Kit, No. 3604

Product From E-Z-Hook

The E-Z-Hook Flexible DMM Test Accessory Kit, No. 3604, is a comprehensive test kit that includes a variety of connectors including alligator clips, probes and insulation piercing test hooks. The kit includes five different test leads of various lengths. The connectors and test leads are designed to work with most industry standard digital multimeters. The kit variety provides a choice of test connectors that can easily be interchanged depending on the requirement. The insulation piercing XEL test hook has recently been redesigned with shrouded banana sockets on both sides of the handle, allowing for greater flexibility in the field.

Get Info Now

CrimPro 4-in-1 Angled Wire Tool, No. 5950A

Product From OTC, Bosch Automotive Service Solutions

The OTC CrimPro 4-in-1 Angled Wire Tool, No. 5950A, combines four separate tools into one convenient configuration for common wire repairs technicians experience every day. Simplify wire repair in hard-to-reach places with the ability to pull or twist wires, cut, strip or crimp from any angle. When wire service is compromised by limited access,

Get Info Now

Wire Loom Threading Kit, No. 4462

Product From OTC, Bosch Automotive Service Solutions

The OTC Wire Loom Threading Kit, No. 4462, saves time and hassle when servicing or adding electronic components to a vehicle. It allows new wire to be threaded into existing looms without cutting tape or zip ties,

Get Info Now

Micro 64 square probes

Product From Jumperkits

The Jumperkits Micro 64 square probes can be used for various applications including automotive, commercial vehicles, engine-management systems, powertrain-control systems, ABS systems and airbag systems. These Micro 64 probes are available in packs of three male and three female probes. The male pin measures 0.64mm. These probes fit terminals found in the various models of Buick, Cadillac, Chevrolet, GMC and Pontiac vehicles.

Get Info Now

Test Leads with Screw-off Aligator Clips, No. 629

Product From Electronic Specialties, Inc.

The Electronic Specialties Test Leads with Screw-off Alligator Clips, No. 629, are designed to work with most DMM’s currently in use. Connection to the multimeter is made via industry standard, right-angle shielded banana plugs. The alligator clips screw on and off so that, when desired, the test lead can be clamped permanently to the test point. This frees hands for other tasks, like wiggle testing and other diagnostic troubleshooting. The test leads are 48" and and CATIII 1,000V safety rated. The maximum test current is 10 amps. 

Get Info Now

Heavy Duty Insulation Piercing Test Clips, No. 142-3

Product From Electronic Specialties, Inc.

The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently in use. They will connect to the main test lead in the kit via straight banana plug connection. These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible. After use, special care should be taken to seal the point where the wire was pierced.These probes feature CATIII 1000V safety rating. The maximum test current is 5 amps.

Get Info Now

20-Piece Back Probe Kit, No. 23500

Product From S & G Tool Aid Corp.

The S & G Tool Aid Corp. 20-Piece Back Probe Kit, No.23500, is used to back probe harness connectors, fuel injectors and automotive sensors. The stainless steel probes come in straight, 45-degree and 90-degree profiles in 0.027" and 0.040" diameters. The probes are color-coded for easy identification and are compatible with the standard 4mm plug. Also included with the kit are 12" extension leads, color-coded the same as the back probes for use in recessed areas. All probes easily insert into automotive connectors. The kit is supplied in a durable, plastic storage case.    

Get Info Now

Low Amp Current Probe No. 80i-110

Product From Fluke Corporation

Accurate current measurements become more and more critical when troubleshooting electronic, and automotive circuits. The Fluke Low Amp Current Probe, No. 80i-110, is an AC/DC Current Probe designed to provide safe, high accuracy measurements for a wide range of applications. The specially designed built in safety features such as the 600 V rms rating at the input jaws, output cable, and banana jacks enhance work safety in automotive shop environments. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like ignition systems.

Get Info Now

Video Scope Kit, No. VS-55H

Product From Ansed Diagnostic Solutions

Ansed’s Video Scope Kit, No. VS-55H, allows for viewing automotive components in remote locations. The kit contains a Hyperion Technology 5.5mm x 1m probe, 110 degree mirror, 39” long AV cable, 39” long USB cable , 4GB SD card, four AA batteries and a plastic carrying case. The video monitor features a shock-resistant 3.5” glass screen with a compact design. Ansed probes come IP67-rated for dust and fluid, resistant to all fluids including water, coolants, oils, brake fluid and transmission fluid.

Get Info Now

AnsedVideo Scope Probe Adaptor, No. ADPTR

Product From Ansed Diagnostic Solutions

Ansed's Video Scope Probe Adaptor, No. ADPTR, allows Ansed probes to be used with Snap-on BK5500, BK5500A, BK5500W and BK6000 series analog video scopes. The adapter features a multi pin/threaded side of adaptor which connects to all Ansed probes as well. The adaptors include connections with locating markings for proper and easy connection.

Get Info Now