Complete A/C Flush Kit No. 59172

Complete A/C Flush Kit No. 59172

Complete A/C Flush Kit No. 59172 Product Image

Four Seasons, a division of SMP, has added a complete A/C flush kit (No. 59172) to its line of premium air conditioning service parts. The kit includes a flush tank, universal adapter, regulator, rubber tip, 18" rubber hose and a shut-off valve. The Four Seasons-exclusive design uses a continuous supply of regulated shop air, as well as a component adapter, which allows a busy technician to hook up the component, start the flush process and work on something else while the tool does the work.

Expand for more details on this Product

MT1400 Compressor Electronic Control Valve Tester

Product From Santech Industries

The Santech Industries MT1400 Compressor Electronic Control Valve Tester can test electronic control valves in variable displacement compressors. The tester can be placed in-line between the compressor control valve and wiring harness connector, so control valve issues can be diagnosed before condemning the compressor. The electronic control valve regulates internal compressor pressure to change compressor displacement. The tester regulates the input signal to the control valve to verify the valve operation. A compressor with a low-pressure differential may simply have a defective or dirty electronic control valve or not be receiving the proper voltage signal to the control valve.

Get Info Now

"Inspector" 2 in 1 Electronic/UV Leak Detector, No. 55200

Product From Mastercool Inc.

Mastercool's "Inspector" 2 in 1 Electronic/UV Leak Detector, No. 55200, delivers an accurate and instantaneous leak detection. It includes an ultra-bright UV LED and an A/C "sniffer." The sniffer, which can detect leaks as small as 1/10 oz per year, features six levels of sensitivity for 15 levels of detection and a tri-colored visual leak level indicator. It meets SAE J1627 and CE Conformity and comes with UV enhancing "yellow" glasses.

Get Info Now

Thermistor Tester, No. MT3701

Product From Santech Industries

Santech Industries Thermistor Tester, No. MT3701, specifically tests thermistor and sun load sensor circuits. The tester can be placed in-line between the sensor and wiring harness connector. It operates on an ohm signal. The unit has an ECM mode which reads the signal and manual mode that can change input signals. This helps check if the sensor can have an effect in turning the A/C compressor off and on. In this way, the tool can verify if a sun load sensor needs to be replaced. The Kit includes one set of universal leads.

Get Info Now

EFX60 In-ground Scissor Lift

Product From Rotary Lift

Rotary Lift’s EFX60 heavy duty in-ground scissor lift incorporates patented design features to make lift setup and operation faster and easier, resulting in more productive technicians and less vehicle downtime. The EFX60 incorporates Rotary’s patented universal style lifting saddle with flip-up adapters and a wide range of lightweight, certified adapters. This technician-friendly design makes lift set-up a breeze. The lift’s infinite adapter adjustment range means technicians can precisely position adapters to properly lift vehicles weighing up to 60,000 lbs. The EFX60 was built with superior strength to provide greater service life, reduced maintenance and better overall productivity. Its centering links are 33 percent stronger than those on similar lifts. 

Get Info Now

Wrench Connection Set, Nos. WC100 and WC200

Product From E-Z Red Company

The E-Z Red Wrench Connection set connects almost any 6-point or 12-point tool to another, making the possible angle and leverage combinations almost limitless. Molded-in magnets assure hold, allowing these tools to connect any wrenches to each other no matter how long, short  or offset they may be. Also connect socket to wrenches with or without the use of extensions, or no matter how deep or shallow sockets may be. Two sizes available: No. WC100 low-profile metric Hex set includes sizes 8mm-19mm; No. WC200 low-profile SAE hex set includes sizes 1/4” to 13/16”.

Get Info Now

UV Phazer Black, Nos. 413065 and 414075

Product From UView Ultraviolet Systems

UView's UV Phazer Black, Nos. 413065 and 414075, features a "True UV" LED blacklight that is 11 times more powerful at illuminating UV dyes than previous offerings. Available in rechargeable lithium-ion (No. 413065) and AAA battery (No. 414075) offerings, the flashlights benefit from the features of the Phazer Neo, but at an even better price. Includes adjustable lens focus, anodized aluminum housing and a 400 nm wavelength.

Get Info Now

LT991 Hollow End Line Taps

Product From Lock Technology, Inc. (LTI Tools)

Lock Technology's LT991 Hollow End Line Taps help rethread female fittings without line removal in order to make it easier to service A/C and hydraulic line fitting threads that become corroded over time and otherwise break when disconnected. The hollow-end tap slides over flared end of line easily, rethreading the female connector. This eight-piece kit covers all popular sizes including 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 27mm and 1 1/8". Can be used on brake, oil, transmission and heater lines. 

Get Info Now

11100 Manual Bushing R&R Tool

Product From SP Tools/Schley Products Inc.

The SP Tools Manual Bushing Removal and Installation Kit, No. 11100, allows techs to service a wide range of bushings without removing components from the vehicle. Due to the awkward dimensions of many suspension components, using a conventional press to remove and replace bushings can be time consuming and frustrating. This complete system can be used to service the vehicle anywhere in the shop. This kit comes with 22 cups and receivers, with hundreds of size combinations, for quick R&R of suspension bushings. Includes four acme thread spindles, 10mm, 12mm, 14mm and 16mm, featuring ball bearing thrust washers to ensure smooth operation.

Get Info Now

Mist Cleaning Solution

Product From TerraClean

TerraClean's MiST Cleaning Solution effectively treats mold, mildew and bacteria in the HVAC system and cabin of a vehicle. Designed specifically for use with the MiST II Ultrasonic Cleaning Unit. Modern HVAC systems trap more moisture than older systems. These systems are ideal habitats for the growth of mold, mildew, bacteria and other micro-organisms. Spores from these micro-organisms are then regularly blown into the passenger cabin and colonize inside the in-car environment. MiST is highly effective in treating vehicle HVAC systems as well as cabin surfaces restoring the in-car air quality of your customer

Get Info Now

Automotive A/C Flush Kit

Product From Uniweld Products, Inc.

Use the Uniweld A/C Flush Kit to remove contaminates, moisture and acid from the evaporator and condenser. It is designed to work with any A/C flush solvent that can be mixed with pressurized air. Features include a pressure relief valve that opens automatically at 180 to 190 PSI, protecting the cylinder and equipment from overpressure. Also comes with the valve assembly with a liquid dip tube; and Ball Valve with 1/4 turn open/close; 24" flexible service hose; and a blow gun fitted with rubber tip nozzle.

Get Info Now