Weldcraft now offers six models of stainless steel water coolers designed to provide consistent, long-term cooling performance on both TIG and MIG welding applications, as well as plasma cutting operations. Each of the water coolers is available in 115V and 230V models and operates on single-phase power with 2-gal., 3-gal. or 6-gal. reservoir sizes available. These water coolers include factory preset pressure release valves that maintain consistent pressure during operation. Come with 10' power cords to allow for greater maneuverability around the workspace.
Stainless Steel Water Coolers
- Product From Martech Services Co.
Compliance with the OSHA requirement for Grade "D" Breathable Air can be accomplished with the use of the Personal Air Breathing Unit Model No. P-20, manufactured by Martech Services Company. When used properly, the unit will work with the existing filtered compressed air supply, providing air for a proper NIOSH-approved respirator, and with the provided 54" tool air hose assembly, it will allow for a bypass of air for a paint spray gun. The unit is a 20 scfm system, allowing for use with full hoods, equipped with vortex cooling tubes, and provides the breathable air required to protect painters, blasters, and welders.
- Product From Weldcraft
Weldcraft has expanded its premium tungsten electrode offering to include two percent lanthanated and zirconiated tungsten electrodes. The two percent lanthanated tungsten electrodes are a good substitute for two percent thoriated tungsten electrodes. The new zirconiated tungsten electrodes resist spitting in higher current applications, minimizing the opportunity for tungsten contamination. These electrodes also provide excellent arc starts and stability, and ball up easily in AC applications, ensuring a smooth arc. Weldcraft offers all of its tungsten electrodes in seven-inch lengths and in five industry-standard diameters (0.040", 1/16", 3/3two", 1/8" and 5/3two").
- Product From Tapeswitch Corporation
Tapeswitch Corporation manufactures pressure sensitive electrical edges that stop a machines operation in key presence sensing conditions depending on the product selection. These products are used for safety, sensing and detection among many operations throughout the world. Improve shop safety with safety edges for lifts, toe activation for machinery, safety bumpers for vehicle detection, road switch mats for vehicle counting. Offer trapped key interlocks and non-contact interlocks for guarding of machining and equipment areas, power switching of machinery and access control.
- Product From True Source Enterprises, Inc.
True Flex Knee Pads, from True Source Enterprises, are uniquely jointed to move with the natural motion of the knee. Great for welding applications, nylon woven straps are 1” wide on top and 1-1/2” on the bottom are placed in such a way as not to bind behind the knee yet maintains a positive fit to keep the pad in place kneeling, standing, walking or running. The unique zip clip easily allows the user to put the knee pad on and off quickly and adjust even while in use.
- Product From Hobart Welders
Hobart Welding Products announces the new Champion 145 Welder/Generator, replacing the Hobart Champion 4500 Welder/Generator. This lightweight and compact unit features a larger gas tank – 6.25 gal. compared to 1 gal. on the Champion 4500 – that provides longer run times. The unit provides up to 145 amps of DC welding power, offers exceptionally smooth arc-starting capabilities and can accommodate stick electrodes up to 5/32" diameter. The Champion 145 Welder/Generator offers 4,500 surge watts of AC power, making it an excellent choice for emergency backup or for powering hand tools, grinders, lights or battery chargers.
- Product From Steinel
The Steinel Auto Body Welding Kit, No. 34874, has everything technicians need to professionally repair bumpers and other body parts. This kit helps repair cracks, fractures, deep scratches in plastic and detached holders. The easy welding rod works well with all plastics. One job takes about 30-60 minutes to complete. The kit includes the following: HG 2310 LCD Programmable IntelliTemp Heat Gun, a welding iron, a 9mm reduction nozzle, a 20mm reduction nozzle, ThermoFlex welding rods, wire mesh, a temperature guard and instructional DVD, all in a heavy duty carrying case.
- Product From Tregaskiss
Tregaskiss had made its Quick Load Liners standard on Tough Gun and TGX Semi-Automatic MIG Guns. Quick Load Liners have been standard on all Tough Gun Robotic and Automatic MIG Guns since 2010. Installed from the front end of the MIG gun, Quick Load Liners require less than half the time of a conventional liner replacement. To replace a Quick Load Liner, the welding operator simply removes the front-end consumables and feeds the liner through the front of the MIG gun and over the wire, using it as a guide. Quick Load Liners accommodate wire sizes from .023" to 3/32".
- Product From DEWALT
DEWALT announced the launch of a full range of Wearable Backing Flap Discs and Extended Performance Flap Discs. DEWALT engineered a stronger cloth with a better grain and resin formula compared to their other high performance discs, and then optimized the design of each flap width, length and number of flaps. The new Wearable Flap Discs utilize the flap design of the Extended Performance discs plus the new DEWALT-exclusive wearable backing feature. The backing automatically wears away at the same rate as the cloth, allowing full use of the cloth.
- Product From Shark Industries
Shark Industries announces the availability of their new all-leather Welding Jackets. These jackets are made to protect against sparking, especially in overhead welding where sparks can land on clothing while welding. The Shark leather welding jackets are available in L, XL and XXL sizes. Leather aprons for welding are also available.
- Product From Steck Manufacturing
The Mig Torch Holder, from Steck Manufacturing, attaches directly to the car so the torch head can be held close to the welding activity, eliminating the need to continually lay hot welding torch heads on the floor and pick them back up. Constructed of polypropylene with two prong metal 26mm rods to hold the hot torch head safely out of the way, th Mig Torch Holder also has spring-mounted floating magnets which allow it to adjust to the contour of the body panel. Designed to work with all common Mig, Tig and Plasma torch heads.