Fuel Chief FC-25GC Gas Caddy

Fuel Chief FC-25GC Gas Caddy

Fuel Chief FC-25GC Gas Caddy Product Image

JDI introduces the Fuel Chief FC-25GC Gas Caddy. Built to OSHA standards with safety the number-one priority, JohnDow has become a North American U.L. listed manufacturer of portable fuel storage and handling products. The FC-25GC has been rigorously tested for leakage, rupture, stability, abuse and endurance. The new gas caddy includes the JDI-35 HD Pump that is also U.L. Listed and passes U.L.’s higher pressure test requirements.

 

Expand for more details on this Product

Rotating Magnetic Hook

Product From Master Magnetics

Master Magnetics offers the Rotating Magnetic Hook. This industrial-strength hook comes rated at a 65-lb pull, ideal for hanging heavy equipment. With the ability to swivel 360 degrees and swing 180 degrees, this hook can adapt to any position without repositioning the magnet. It can securely hold cables, tools, wires and other equipment where ordinary magnets would slip and slide in workshops, garages, warehouses, contractor vans and more.

Get Info Now

Big Squeeze container crusher

Product From Newstripe, Inc.

The Newstripe Big Squeeze container crusher uses standard shop air to crush automotive oil filters, 1-gal. cans and 5-gal. metal pails quickly and easily. Excess fluids drain to a separate container allowing collected liquids to be disposed of while filters and containers can be sent out as scrap metal. A safety door lock stops the crushing process if the door is opened during the cycle, or any time the door is open. The Big Squeeze is backed by a 36-month warranty and an optional floor stand is also available.

Get Info Now

Stainless Steel Power Pusher

Product From Nu-Star Inc.

NuStar’s stainless steel pedestrian-operated, battery-operated Power Pusher can move loads up to 75 tons. Unlike forklifts or other ride-on equipment, the Power Pusher runs on batteries so it does not consume gasoline, diesel or propane; and, it does not emit any harmful exhaust or fumes. It costs less than a forklift and operators do not need a license. It comes with a built-in battery charger that plugs into a standard outlet. With a footprint less than two square yards, the Power Pusher can be stored at a jobsite and easily transported.

Get Info Now

Super Power Pusher

Product From Nu-Star Inc.

Nu-Star offers the Super Power Pusher pedestrian-operated, battery-powered pusher. The Super Power Pusher uses its own modular range of attachments for handling rolling loads up to 150,000 lbs., or those with high rolling resistance. This unit has a variable speed with soft touch control, has automatic braking and is anti-runaway. With a three-stage, 3 x 15 amp output 110V or 240V charger built right in, simply plug in the unit to recharge the three batteries. The fully programmable control system allows users to set acceleration/deceleration limits. The transaxle design lets the unit operate smoothly on uneven surfaces, indoors or out.

Get Info Now

RoboReel Power Cord System

Product From Great Stuff Inc.

The Great Stuff, Inc. RoboReel Power Cord System features a motorized rewind with no springs and a custom, replaceable cord that won't corkscrew. Easily retract the cord with a power switch on each end of the cord, this unit provides 360-degree rotation and comes with 50' of 12 gauge cord. Includes emergency power shutoff, overheat protection and a four-year, 4,000-wind warranty. Made of resins that are oil-, gas-, chemical- and UV-resistant, the RoboReel is ceiling mountable and portable.

Get Info Now

MAXPRO Brake Bleeder

Product From Phoenix Systems

The Phoenix MaxPro Reverse Brake Bleeder is a revolutionary tool based on the obvious concept that air wants to go up. Traditional brake bleeding tools and techniques fight this principal. This tool helps to quickly remove all the air from the whole braking system. Phoenix reverse bleeding is patented and approved by GM, Raybestos, Bendix and the US Military. Flashlight and mount not included.

Get Info Now

Pressure Sensitive Electrical Safety Edges

Product From Tapeswitch Corporation
Tapeswitch Corporation manufactures pressure sensitive electrical edges that stop a machines operation in key presence sensing conditions depending on the product selection. These products are used for safety, sensing and detection among many operations throughout the world. Improve shop safety with safety edges for lifts, toe activation for machinery, safety bumpers for vehicle detection, road switch mats for vehicle counting. Offer trapped key interlocks and non-contact interlocks for guarding of machining and equipment areas, power switching of machinery and access control.
Get Info Now

Pressure Sensitive Safety Mats

Product From Tapeswitch Corporation
Tapeswitch Corporation manufactures a complete line of electrical, pressure sensitive electrical safety mats that provide safety, sensing and signaling for many purposes, including but not limited to preventing injuries, providing control of and safeguarding machines and equipment, and guarding areas, automotive shops and service areas. These mats are custom-engineered, high-quality and reliable mat products and systems, including those with large areas, cut-outs, and multiple sensing zones mats with the shortest lead times in the industry. We build complete safety, sensing, and detection mat systems.
Get Info Now

Emergency Response Kit

Product From Access Tools

The Access Tools Emergency Response Kit was created specifically for those responding to emergency situations. The kit contains all of the most important tools needed in any emergency including the Mighty Max 2-pc long-reach tool and the flexible long-reach tool. Tools like the Glassman Wedge for frameless window vehicles and the combination of the One Hand Jack tool and Super Air Wedge ensure users won't need to break window glass. The Remote Control Button Master tool allows for the opening, within seconds, of vehicles that use vertical lock buttons, causing zero damage to the vehicle.

Get Info Now

158-pc Heat Shrink Set No. HS34

Product From E-Z Red Company

The E-Z Red 158-pc Heat Shrink Set, No. HS34, offers eight different sized tubes that shrink to fit over cable splices and can be used for wire harnessing, covering, marking and bundling wires. This set can be used for automotive, marine, home, industrial, computer and many more applications. This set offers a 2:1 shrink ratio. The case also features a molded-in ruler for accurate measurement.

Get Info Now