Pinion Shaft Seal Installer, No. 56950

Pinion Shaft Seal Installer, No. 56950

Pinion Shaft Seal Installer, No. 56950 Product Image

The magnetic Lisle Corp. Pinion Shaft Seal Installer, No. 56950, is ideal for driving pinion and other seals into place. The hollow adapter allows the driver to slide over shaft to drive seal. Neodymium magnets on both driver faces hold the seal in place until users are ready. Adapter is double-sided for different sized seals. Works on many applications, especially Ford SUV pinion seals. Can also be used on standard seals. Made from lightweight aluminum to allow more driving power to transfer. Metal cap is replaceable.

Expand for more details on this Product

Universal Seal Puller Kit No. 850

Product From Lang Tools

The unique design of the Lang Tools Universal Seal Puller Kit, No. 850, allows the user to have various angles and leverage points to engage and remove a seal. The jaw width will engage a larger surface area than the competition, says the company, 

Get Info Now

EFX60 In-ground Scissor Lift

Product From Rotary Lift

Rotary Lift’s EFX60 heavy duty in-ground scissor lift incorporates patented design features to make lift setup and operation faster and easier, resulting in more productive technicians and less vehicle downtime. The EFX60 incorporates Rotary’s patented universal style lifting saddle with flip-up adapters and a wide range of lightweight, certified adapters. This technician-friendly design makes lift set-up a breeze. The lift’s infinite adapter adjustment range means technicians can precisely position adapters to properly lift vehicles weighing up to 60,000 lbs. The EFX60 was built with superior strength to provide greater service life, reduced maintenance and better overall productivity. Its centering links are 33 percent stronger than those on similar lifts. 

Get Info Now

3-Piece Seal and O-Ring Puller Set, No. SRP3PC

Product From Matco Tools

Matco Tools' 3-Piece Seal and O-Ring Puller Set, No. SRP3PC, quickly and easily removes O-rings, grease and oil seals. A special angle on the tool head provides better access than the traditional seal pullers. This set offers three different lengths and tips to fit nearly all seal applications. Sizes include: 4.6" 6" and 6.5" pullers.

Get Info Now

Wrench Connection Set, Nos. WC100 and WC200

Product From E-Z Red Company

The E-Z Red Wrench Connection set connects almost any 6-point or 12-point tool to another, making the possible angle and leverage combinations almost limitless. Molded-in magnets assure hold, allowing these tools to connect any wrenches to each other no matter how long, short  or offset they may be. Also connect socket to wrenches with or without the use of extensions, or no matter how deep or shallow sockets may be. Two sizes available: No. WC100 low-profile metric Hex set includes sizes 8mm-19mm; No. WC200 low-profile SAE hex set includes sizes 1/4” to 13/16”.

Get Info Now

Heavy-Duty Circuit Tester No. 30610

Product From Lisle Corporation

The Lisle Heavy-Duty Circuit Tester, No. 30610, has multiple options for connecting to a ground source. The long, 12' cord has a quick coupler to securely connect to clamps or a power outlet plug. Users can also use the power outlet plug to provide a ground in the cabin. Test up to 12V circuits.

Get Info Now

Universal seal installer, No. 17630

Product From Lisle Corporation

Lisle's universal seal installer, No. 17630, allows the user to install many sizes of seals. Features a long handle that provides extra reach when installing pinion seals and has flexible arms for the spider to keep the seal centered during installation. Includes two driver and spider sizes along with long and short handles. The user chooses the driver and spider that best fits the seal to be installed. Place the seal onto the spider. The spider will hold the seal in place and keep it centered while driving the seal. Made in the United States.

Get Info Now

Super Low Profile Wrench Drive Torx Set, No. T1000

Product From E-Z Red Company

The E-Z Red Super Low Profile Wrench Drive Torx Set, No. T1000, fits on any 10mm, 12mm, and 17mm wrench. The ball detent and bottoming shelf securely holds the bit into the drive wrench and the low-profile design allows the user to reach into confined area’s to remove fasteners. This 12-piece kit comes in a blow-molded case for easy storage. Bit sizes: T10, T15, T20, T25, T27, T30, T40, T45, T47, T50, T55, T60a.

Get Info Now

EZ-Driver No. 29920

Product From Mayhew Tools

The Mayhew Tools EZ-Driver, No. 29920, allows techs to install bearings, bushings, gears and seals quickly, without the risk of damage. The EZ-Driver is a unique and highly configural tool set for installing bearings and other components onto or over a shaft. This 33-piece set offers two different styles of force distributors, which are used to apply pressure/force to the correct area of the bearing to eliminate damage of races, cones or cages. Technicians can create over 200 different set-ups to use on hundreds of makes and models of vehicles. The EZ-Driver also installs gears, sleeves, hubs, seals, sycro assemblies, suspension bushings, sprockets and pulleys onto a shaft. Made in the U.S.A. 

Get Info Now

Crimpwell angled crimping plier No. 5912

Product From OTC, Bosch Automotive Service Solutions

The angled design of the OTC Crimpwell Angled Crimping Plier, No. 5912, keeps the connector parallel to the pliers to improve the ability to ensure the wire is properly seated in the connector as well as securing a durable, robust crimp. The universal crimping design accommodates soft wire insulated or un-insulated, solid or stranded in sizes 10-22 AWG. Includes a cutting feature for quicker preparation. Forged from high carbon alloy steel, this tool is 9" in length and provides a protective grip to increase leverage and ensure a secure crimp.

Get Info Now

11100 Manual Bushing R&R Tool

Product From SP Tools/Schley Products Inc.

The SP Tools Manual Bushing Removal and Installation Kit, No. 11100, allows techs to service a wide range of bushings without removing components from the vehicle. Due to the awkward dimensions of many suspension components, using a conventional press to remove and replace bushings can be time consuming and frustrating. This complete system can be used to service the vehicle anywhere in the shop. This kit comes with 22 cups and receivers, with hundreds of size combinations, for quick R&R of suspension bushings. Includes four acme thread spindles, 10mm, 12mm, 14mm and 16mm, featuring ball bearing thrust washers to ensure smooth operation.

Get Info Now