RIDGID Micro IR-100 Non-Contact Infrared Thermometer

RIDGID Micro IR-100 Non-Contact Infrared Thermometer

RIDGID Micro IR-100 Non-Contact Infrared Thermometer Product Image

The RIDGID micro IR-100 non-contact infrared thermometer provides simple, quick and accurate surface temperature readings at the push of a button. By squeezing the trigger and pointing the ultra-sharp dual class II lasers to spotlight the surface being measured, the micro IR-100 thermometer provides an immediate temperature measurement on a clear, easy-to-read backlit LCD display. Audible and visual high and low alarm settings alert the user quickly to temperatures outside of the set ranges. The micro IR-100 thermometer has a large temperature measuring range of -58 degrees F to 1,472 degrees F.

 

Expand for more details on this Product

Temperature Tester, No. 5811585

Product From Global Parts Distributors, LLC

The Global Parts Distributors Temperature Tester, No. 5811585 allows technicians to easily and quickly measure the temperature performance of an automotive air conditioning or heating system. It can also be used to detect restricted condensers and heater cores. The screen displays inlet and outlet temperatures and the differences between them. The Temperature Tester probes are color-coded blue and red and the clamps are designed for easy attachment, even in difficult-to-reach areas. Easy-to-follow instructions are included as a reference guide. 

Get Info Now

MiniTemp IR thermometers, Nos. MT2 and MT4

Product From RAYTEK

The Raytek MiniTemp IR thermometers, Nos. MT2 and MT4, are non-contact, infrared thermometers for professionals in any industry where they need to accurately and safely measure surface temperature. These thermometers can be used to measure temperatures on hot and hard-to-reach places or on moving parts. The laser point sighting on the MT4 unit helps to direct measurements toward the target and the large back-lit displays on both models show the current and maximum readings simultaneously. These units read temperatures from 0 to 750 degrees F (-18 to 400 degrees C).

Get Info Now

MiniTemp thermometer, No. MT6

Product From RAYTEK

The Raytek MiniTemp thermometer, No. MT6, is a non-contact thermometer for automotive professionals. The MT6 can be used to spot cooling system faults, identify engine misfires, check for proper A/C performance, verify catalytic converter operation and more. The laser point sighting on the MT6 unit helps to direct measurements toward the target and the large back-lit display shows both the current and maximum readings simultaneously. This unit has a protective boot for added durability, an ergonomic design and reads temperatures from -20 to 932 degrees F (-30 to 500 degrees C).

Get Info Now

Thermometer Kit, No. MT3720

Product From Santech Industries

Santech Industries' Thermometer Kit, No. MT3720, contains a dual read-out thermometer with J/K type thermo clamps and probes. The probes use the J/K type connectors allowing for a combination of probe usage. It provides probes for various temperatures to be use for the testing of components on different parts of the vehicle. The thermo clamps and probes can read between -58 degrees F to 1292 degrees F. It includes a rubber protective cover for the thermometer and plastic carrying case. The kit also includes an assortment of probes and extension leads.   

Get Info Now

VT02 Visual IR Thermometer

Product From Fluke Corporation

Fluke's VT02 Visual IR Thermometer, a troubleshooting camera with an infrared heat map, bridges the gap between low cost IR thermometers and higher priced thermal imagers. Use the VT02 to detect blockages in heater cores and cooling systems, diagnose automotive electrical issues and determine failed bearing components quickly without the use of other less-efficient tools. The tool combines the visual insight of a thermal imager, the visual images of a digital camera, and the point-and-shoot convenience of an IR (infrared) thermometer. It can display and save images as full visual, full infrared or in three blended modes (25, 50, and 75 percent), and comes with free Smartview software.

Get Info Now

Multi-Laser Infrared Thermometer No. RTEMP8

Product From Snap-on Inc.

The Snap-on Multi-Laser Infrared Thermometer, No. RTEMP8, provides a distance to spot ratio of 12:1 with a measuring range from -76 degrees F to 1,400 degrees F (-60 degrees C to 760 degrees C) and an operating range from 32 degrees F to 122 degrees F (0 degrees C to 50 degrees C). With an accuracy within +/- 1.8 degrees F (+/- 1 degree C), this thermometer has a response time of one second. Includes E, MAX, MIN, DIF and AVG modes on a color screen display. This unit weighs 9.02 oz including batteries, with a minimum nine hours of continuous use. 

Get Info Now

Digital Folding Pocket Thermometer No. 13800

Product From Lang Tools

Lang Tools offers the Digital Folding Pocket Thermometer No. 13800. The thermometer features a large display for easy viewing; a 3-year warranty; a folding probe, allowing for easy temperature measurement in vents, as well as safe storage; a magnetized backing for hands-free operation; a Min/Max for easy recording of temperature extremes; and a range of  -58 to 572 degrees F for automotive applications.

Get Info Now

Infrared Thermometer No. 13801

Product From Lang Tools

The Lang Tools Infrared Thermometer, No. 13801, features a dual laser with 12:1 true spot technology for clear visibility of target measurement zone. This thermometer includes an IP54 rating, giving the confidence of protection against water and dust contamination. Comes with a Min/Max/Avg differential allowing the user to easily view differences across the range of measurements, and Hi/Low alarms for testing applications relative to predetermined standards. Broad range of -76 to 1022 degrees F.

Get Info Now

Infrared Thermometer No. MST252224

Product From MONSTER

Monster offers the MST252224 Infrared Thermometer which measures from -76 degrees F to 1022 degrees F. Features and benefitsinclude a 12 to 1 distance to spot ratio; laser targeting for accurate temperature readings; a rugged ABS blow molded design; and heavy duty clam shell packaging. The Monster line of tools and equipment are exclusively available from Mobile Tool Distributors.

Get Info Now

Infrared Thermometer with Dual Laser

Product From Mastercool Inc.

The Mastercool Infrared Thermometer with Dual Laser, No. 52224-C, features an enhanced backlit LCD color display and an expanded temperature range of -76 degrees F to 1,022 degrees F. The dual laser spot target indicator provides more targeted temperature readings with a 12:1 field of view, with a response time of 1 second. This unit powers off automatically after 15 seconds of idle time. Accessories include two AAA batteries, an instruction manual and plastic molded carrying case.

Get Info Now