Acme Automotive offers the GilaFlex inner-braided PVC air hose with a special blend of PVC that has no memory, so hose will lay flat on the ground. With a 180-degree bend radius, the hose will not kink and cut off air supply. A steel spring strain relief protects the hose at its weakest point, near the fitting, without inhibiting maneuverability. The smooth outer cover doesn't trap dirt and is easy to clean. The GilaFlex has a temperature range of -40 degrees F to 150 degrees F, and a working pressure of 325 psi at 70 degrees F.
GilaFlex air hose
From Acme Automotive
- Product From Robinair, Bosch Automotive Service Solutions
The Robinaire R-134a manifold hose kit, No. 45111, has brass manifold with easy-to-grip handles, R12/R134a gauges, PSI, ½" ACME bottom ports, rear R134a and ½" ACME fittings for holding hoses,90-degree manual couplers, 72" R134a hose set (1/2" ACME x 14mm).
- Product From Lisle Corporation
The Lisle Wheel Stud Pilot Pin Set, No. 13950, makes it easier to remove and install wheels on many European vehicles with lug bolts. Three pairs of metric threaded wheel stud pilot pins allow users to hang the wheel without having to balance the wheel on the small lip of the hub. This helps prevent the wheel from falling and causing damage or injury. Users can simply insert the proper size threaded pins into hub bolt holes to hold the wheel in place while inserting or removing lugs. This set includes 12mm by 1.5mm, 14mm by 1.25mm and 14mm by 1.5mm threaded pins, which are also available individually.
- Product From CPS Products
The CPS Portable Recovery Unit, No. CPSTRA21, is the fastest SAEJ2810-approved, portable recovery recycle machine in the industry, according to the company. The unit is ready begin the refrigerant recovery process immediately out of the box with all accessories, hoses and equipment. This unit offers a twin cylinder with an oil-less 2/3hp compressor, an oil separator and filter with sight glass, a tank overfill float switch and a high-pressure cut-off switch. This unit also includes a 30-lb. tank and manifold set with 60" hoses and manual couplers. The dimensions are 30" long by 18" tall by 12" wide and it weighs 36 lbs.
- Product From Coxreels
Coxreels' Pure Flow Series reels can be used for breathing air and clean fluid transfer applications. These reels supply non-corrosive air and fluid paths using a stainless steel full-flow swivel and Nitrile non-toxic food grade seals ensuring clean, non-contaminated, safe and reliable transfer of breathing air, potable water or other clean fluids. Conveniently offered in spring rewind, hand crank, and motorized retraction options. Can be used in fields of application such as fire rescue, pharmaceutical manufacturing, food and chemical processing plants, hazardous site cleanups, and medical and hospital air services.
- Product From Ken-Tool
The Ken-Tool Blue Cobra Truck Tire Service Set, No. 35442, features the company's Blue Cobra Truck Tire Demount Tool (No. 35440) and includes six other needed components to service most 22.5" and 24.5" truck tires quickly and easily. This set also includes the T45C Classic Tubeless Tire Iron, No. PN 34645C; Double-End Tire Spoon, No. PN 33050; Euro Lube Paste – 8 lb. Pail, No. PN 35848; Euro-style Lube Applicator Brush, No. PN 30512; two aluminum C-Loc Bead Holders, No. PN 31713; and Leather Rim Protector, No. PN 31810. The service set is packaged in a single, 40-lb box.
- Product From Tru Align LLC
The Tru Align Direct Mount Hub Adapter is a product add-on used to eliminate the need for alignment clamps during wheel alignments. This adapter is perfectly centered and easily attaches to the updated Tru Align Plate. The expandable sleeve allows for any manufacturer’s alignment heads to directly mount on the Tru Align Plate. By attaching directly to the vehicle’s hub, Tru Align eliminates the alignment inaccuracies and clamp attachment difficulties of both the “quick clamp” and “traditional” alignment systems.
- Product From Myers Tire Supply Co.
Myers Tire Supply offer the Sens.it (Sensor Intelligent Technology) Programmable TPMS Sensor, a web-based system that identifies individual TPMS specifications and programs a new sensor in less than a minute. Users enter the VIN and faulty sensor serial number into the program on their PC. The vehicle-specific sensor data is downloaded and embedded in the Sens.it sensor, then ready to install. Sens.it covers all 315Mhz versions for Ford, GM, Chrysler, Toyota, Nissan and Honda and is compatible with all TPMS tools.
- Product From Dent Fix Equipment
Re-create fender curve lines perfectly every time with the DF-BL10 Body Line Marker Tool from Dent Fix. The Body Line Tool makes accurate measurements around wheel opening moldings quickly and easily. Using the same method a compass uses to draw exact circles or arcs from a single point, this tool draws a line equal distance from any part of the fenders edge.
- Product From Sankyo Reels Inc.
Triens Z-series reels, from Sankyo Reels, are heavy-duty steel reels in plastic covers available in various colors. Features:
- Most suitable for compressed air supply.
- Comes equipped with hose end connector as standard equipment.
- Product From Hennessy Industries Inc.
The COATSLeverless Power Duckhead Bead Lifter, from Hennessy Industries, is a mount/demount system that retrofits the COATS APX, 9024 and 70X series tire changers. The bead lifter’s leverless design eliminates traditional tire tools that can mar the tire’s surface. During demounting, the leverless tool hooks the lip of the bead and effortlessly lifts it just above the rim. The tire then comes off the rim with a simple rotation of the tabletop. The leverless tool can also be utilized as an additional helper device when mounting a tire’s top bead.