LOADpro Dynamic Test Leads, No. 180

LOADpro Dynamic Test Leads, No. 180

LOADpro Dynamic Test Leads, No. 180 Product Image

Electronic Specialties' LOADpro Dynamic Test Leads, No. 180, allow users to instantly load the circuit to see if current can flow.  LOADpro leads are designed specifically for finding wiring faults in automotive and heavy-duty vehicles and equipment. The LOADpro finds high corrosive resistance, shorts to the ground and open circuits more quickly. Using almost any digital multimeter, the LOADpro can locate corrosion in wiring with just by pressing the switch. LOADpro Test Leads also feature SteadyPin Probe Tips. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin.

Expand for more details on this Product

Flexible DMM Test Accessory Kit, No. 3604

Product From E-Z-Hook

The E-Z-Hook Flexible DMM Test Accessory Kit, No. 3604, is a comprehensive test kit that includes a variety of connectors including alligator clips, probes and insulation piercing test hooks. The kit includes five different test leads of various lengths. The connectors and test leads are designed to work with most industry standard digital multimeters. The kit variety provides a choice of test connectors that can easily be interchanged depending on the requirement. The insulation piercing XEL test hook has recently been redesigned with shrouded banana sockets on both sides of the handle, allowing for greater flexibility in the field.

Get Info Now

CrimPro 4-in-1 Angled Wire Tool, No. 5950A

Product From OTC, Bosch Automotive Service Solutions

The OTC CrimPro 4-in-1 Angled Wire Tool, No. 5950A, combines four separate tools into one convenient configuration for common wire repairs technicians experience every day. Simplify wire repair in hard-to-reach places with the ability to pull or twist wires, cut, strip or crimp from any angle. When wire service is compromised by limited access,

Get Info Now

Wire Loom Threading Kit, No. 4462

Product From OTC, Bosch Automotive Service Solutions

The OTC Wire Loom Threading Kit, No. 4462, saves time and hassle when servicing or adding electronic components to a vehicle. It allows new wire to be threaded into existing looms without cutting tape or zip ties,

Get Info Now

Micro 64 square probes

Product From Jumperkits

The Jumperkits Micro 64 square probes can be used for various applications including automotive, commercial vehicles, engine-management systems, powertrain-control systems, ABS systems and airbag systems. These Micro 64 probes are available in packs of three male and three female probes. The male pin measures 0.64mm. These probes fit terminals found in the various models of Buick, Cadillac, Chevrolet, GMC and Pontiac vehicles.

Get Info Now

Biuret Micrometer

Product From Acustrip, Inc.

The Acustrip Biuret Micrometer, allows manufacturers, jobbers, retailers, and end users to monitor and maintain the quality of the DEF in their entire supply chain with lab-analysis supported field testing. This enables users to identify issues early. 

Get Info Now

Test Leads with Screw-off Aligator Clips, No. 629

Product From Electronic Specialties, Inc.

The Electronic Specialties Test Leads with Screw-off Aligator Clips, No. 629, are designed to work with most DMM’s currently in use.  Connection to the DMM is made via industry standard, right-angle shielded banana plugs. 

Get Info Now

Heavy Duty Insulation Piercing Test Clips, No. 142-3

Product From Electronic Specialties, Inc.

The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently in use. They will connect to the main test lead in the kit via straight banana plug connection. These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible. After use, special care should be taken to seal the point where the wire was pierced.These probes feature CATIII 1000V safety rating. The maximum test current is 5 amps.

Get Info Now

20-Piece Back Probe Kit, No. 23500

Product From S & G Tool Aid Corp.

The S & G Tool Aid Corp. 20-Piece Back Probe Kit, No.23500, is used to back probe harness connectors, fuel injectors and automotive sensors. The stainless steel probes come in straight, 45-degree and 90-degree profiles in 0.027" and 0.040" diameters. The probes are color-coded for easy identification and are compatible with the standard 4mm plug. Also included with the kit are 12" extension leads, color-coded the same as the back probes for use in recessed areas. All probes easily insert into automotive connectors. The kit is supplied in a durable, plastic storage case.    

Get Info Now

NitroPRO NTO-200 Nitrogen Tire Top-Off System

Product From Mahle RTI

RTI Technologies' NitroPRO NTO-200 Nitrogen Tire Top-Off System was developed to provide a lightweight, portable and cost-effective tool for nitrogen tire top-off service and individual tire conversions. It can be used for nitrogen inflation of smaller pneumatic tires like bicycle, motorcycle and lawn and garden implement tires.Features:

Get Info Now

Low Amp Current Probe No. 80i-110

Product From Fluke Corporation

Accurate current measurements become more and more critical when troubleshooting electronic, and automotive circuits. The Fluke Low Amp Current Probe, No. 80i-110, is an AC/DC Current Probe designed to provide safe, high accuracy measurements for a wide range of applications. The specially designed built in safety features such as the 600 V rms rating at the input jaws, output cable, and banana jacks enhance work safety in automotive shop environments. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like ignition systems.

Get Info Now