Parflex Bonded Hoses

Parflex Bonded Hoses

Parflex Bonded Hoses Product Image

Bonded hoses from Parker Hannifin, Parflex Division, in Twin-Line and Multi-Line configurations eliminate the problem of tangling in multiple hose applications. A bonded hose is particularly beneficial in lift truck, hydraulic crane and aerial lift applications. A pre-made assembly reduces inventory by eliminating multiple parts and part numbers. Parflex Twin-Line hoses consist of two identical hoses permanently joined for the entire length of the hose. Parflex Multi-Line Hoses consist of 2-10 hoses (or a maximum width of 10”) in various combinations of sizes and types. Where needed, hoses can be separated to allow for routing. Bonded Hoses are available in a variety of styles and sizes range from 3/16” up to 1”. 

 

Expand for more details on this Product

Contitech 'Problem Solver' Timing Belt Kits

Product From CRP Automotive

CRP Automotive’s ContiTech Pro Series Plus Timing Kits solve special service problems by providing technicians with all of the components needed to perform a proper timing belt and water pump service. This kit includes additional components to help technicians handle specific application issues that are typically encountered during the service such as impeller failure and corrosion issues. The kits also include front cam and balance shaft seals. CRP uses seals that match or exceed all of the OE specs for ID, OD, width and material, unlike competitors who use a generic seal that only matches ID and OD.

Get Info Now

Pre-formed harnesses and bundles of Nylon Air Brake

Product From Parker Hannifin Corp.

Pre-formed harnesses and bundles of Nylon Air Brake from Parker Hannifin can reduce installation time by more than 70 percent. Designed for use in tractor, trailer and other mobile air brake applications, time studies show an average chassis harness installation took four employees about 40 minutes to complete. However, with a Parker preformed harness, installation time dropped to 10 minutes and only one employee was required to complete the install. It comes in sizes 1/8" O.D. up to 3/4" O.D. and has a maximum working pressure of 150 psi. It can operate in temperatures as high as 200 degrees F.

Get Info Now

Bonded Hoses

Product From Parker Hannifin Corp.

Parker Hannifin's Bonded Hoses come in both a Twin-Line or Multi-Line configuration. Bonded hoses eliminate the problem of tangling in multiple hose applications. They also improve the management of the hose and increase the overall strength, eliminating some of the reasons hoses fail in the field. Consists of two identical hoses permanently joined for the entire length of the hose, offering a compact system for easy installation and smooth operation. Multi-Line hoses consist of two to ten hoses (or a maximum width of 10") in various combinations of sizes and types.

Get Info Now

ContiTech accessory drive kits

Product From CRP Automotive

CRP Automotive's ContiTech accessory drive kits include all of the necessary belts, idlers and tensioner pulleys needed to replace wearing parts of the accessory drive system. Each kit is thoroughly researched and accurately packaged to make sure all of the components are exactly specified for the vehicle. All of the kit components are OE-quality, according to the manufacturer. The accessory drive kit program includes 32 kits for 214 vehicle specific applications, which cover over 21 million vehicles in operation today. Kits simplify the serpentine drive system parts purchasing process by eliminating the additional time required to source the parts individually.

Get Info Now

Stretch belt installer/remover, No. 59370

Product From Lisle Corporation

Lisle's stretch belt installer/remover, No. 59370, allows the technician to easily slip off the old stretch belt and slip on the new one without having the tool fall to the shop floor when turning the pulley. This is done by having a powerful internal magnet inside the tool that keeps it securely on the pulley, even when upside down. Can be used on both the front and back side of the pulley. Helps prevent damage to belt and/or pulley during removal and installation.

Get Info Now

Rubber Covered Fluoropolymer Hose (RCTW)

Product From Parker Hannifin Corp.

Parker Hannifin’s PAGE International Hose’s USP Class VI certified RCTW (Rubber Covered Fluoropolymer Hose) is designed to transfer materials without contaminating the integrity of the product. The hoses handle temperatures up to 300 degrees F/149 degrees C. The EPDM rubber covers the FEP tube with multi-layers of rubber and polyester reinforcement, with an added helical wire for support. The rubber and polyester insulates the tube, eliminating the risk for burns that are associated with stainless steel reinforcement, and the wire helix supports full vacuum service. Sizes range from 1/2” I.D. up to 4” I.D.

Get Info Now

Non-Conductive Thermoplastic Hose No. 518D

Product From Parker Hannifin Corp.

Parflex engineers have developed No. 518D non-conductive thermoplastic hose to withstand the harshest environments, both internally and externally. The core material in the hose is highly resistive to hydraulic fluids with aggressive additives that move through the hose over time (permeation). Parflex gave the No. 518D a special reinforcement package to reduce the reinforcement diameter, allowing for an increase in the thickness of the PFX cover. In lab studies, this improvement provided as much as five times more abrasion resistance than the current thermoplastic hoses used in this application. The No. 518D is available in 1/8", 3/16" and 1/4" sizes.

Get Info Now

Parker Tracking System

Product From Parker Hannifin Corp.

Parker Hannifin's Parker Tracking System (PTS) helps keep vehicles and machines running longer by increasing the speed, timing and accuracy of acquiring replacement hose assemblies. PTS has two key components. One is uniquely encoded tracking labels, affixed to the hose assembly at the time it is made, that incorporate visual data, barcodes and optional RFID (Radio Frequency Identification) technology. The second component is a Web-based PTS software system. Each tracking label code is cataloged in the PTS database. The code identifies several key pieces of information about the hose assembly including, where and when it was made; what hose, fittings and accessories were used; and the length of the hose. Special OEM features will include details about the asset in which the assembly is installed as well as other information. PTS expedites the replacement process by making "call ahead" or "site delivery" service possible as hose information is readily available.

Get Info Now

Line Splice

Product From AirSept Inc.

that can defeat narrower o-ring seals.

Get Info Now

Heat-Resistant Hoses

Product From Gates Corporation
Gates hose and connectors are designed to handle the stress and airflow of extremely high temperature engine compartments. All Gates truck and bus hoses are manufactured using True-Bore technology rather than the standard 100R5 specification to ensure exact matching of hose and couplings. Other major products include flexible MegaTech™ hydraulic hose and GLP™ one-piece, low-pressure couplings. Get Info Now