12-in-1 E-Z Wrench Set, No. RW12

12-in-1 E-Z Wrench Set, No. RW12

12-in-1 E-Z Wrench Set, No. RW12 Product Image

E-Z Red's 12-in-1 E-Z Wrench Set, No. RW12, eases oil changes by eliminating guessing on drain plug sizes. Features:

  • Use on drain plugs for rears, drive axles, transfer cases and more.
  • Reversible, 180-degree flex heads.
  • Includes 1\2”, 1\4” and 3\8” adapters for T-handle-style use.
  • Heavy-duty pouch.
  • Large size ranges: 14mm-19mm, 9/16"-3/4".
  • Small size ranges: 8mm-13mm, 5/16"-1/2".

Expand for more details on this Product

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130

Product From Lisle Corporation

The Lisle Corp. Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130, are designed to remove and replace the main filter collar as well as the vent cap on aftermarket diesel fuel filter systems. The unique half-moon design provides easier access to the fuel filter, according to the company. High-strength steel prevents the wrench from flexing while loosening filter collars, four teeth grab the vent cap securely to prevent damage and a thick, padded grip cushions users hands. The 61090 wrench fits 5" Davco 242/243 aftermarket fuel filter systems, the 61110 fits 6" Davco 382 aftermarket fuel filter systems and the 61130 fits 8" Davco 482 aftermarket fuel filter systems. 

Get Info Now

Spline Ratcheting Wrench Set, No. NR5M

Product From E-Z Red Company

The 5-pc extra long flex head Spline Ratcheting Wrench Set, No. NR5M from E-Z Red has extra long spine with 180-degree flex heads. The tool meets and exceeds ASME/ANSI torque specifications. It comes packaged in the signature E-Z Red high density foam tray and has a  limited lifetime warranty. It includes sizes: 8mm x 10mm, 12mm x 14mm, 13mm x 15mm, 16mm x 18mm and 17mm x 19mm.

Get Info Now

Duramax Water In Fuel Sensor Wrench No. 13100

Product From SP Tools/Schley Products Inc.

When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter. The SP Tools Duramax Water In Fuel Sensor Wrench

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Dual-Offset Combination Wrenches and Non-Slip Sockets

Product From Matco Tools

The Matco Tools Dual-Offset Combination Wrenches have a twin-angle design that allows access to tight and narrow spaces and an ability to provide increased leverage with an open end indexed to 30 degrees and a box end at 15 degrees. The non-slip open-end design loosens and tightens fasteners rounded up to 70 percent. 

Get Info Now

96T High-Torque Hex Key Wrenches

Product From Beta Tools

The 96T Hex Key Wrench by Beta Tools of Italy is made by forging the hex key shapes into the ends of a round bar rather than cutting off the extruded hex bar to create a hex key wrench.  According to the manufacturer, this extra step of forging the hex-end into a bar of steel provides a harder hex key that wears longer as well as a more precise fit with the fasteners. The handle on the 96T wrench is designed to provide the user with a better grip to deliver more torque. Beta Tools makes a complete line of T-handle wrenches in SAE, metric, ball head and Torx. 

Get Info Now