Upper Body Bar

Upper Body Bar

Upper Body Bar Product Image

Chief Automotive's Upper Body Bar extends the reach of Velocity's laser measuring capabilities to cover the entire vehicle, including roof, trunk, strut towers and windows, and to facilitate steering and suspension realignment. It can simultaneously measure a vehicle's steering axis inclination on both sides as well as the vehicle's lower structure, live. It measures multiple points at the same time.

Expand for more details on this Product

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

John Bean Prism Pro 42 alignment machine

Product From Snap-on Equipment

The John Bean alignment machine with Prism Pro 42 software with advanced interface allows the technician to complete a fast and efficient, rolling compensation without jacking the vehicle. The system combines imaging alignment technology in a portable package. The Prism machine leverages a wireless communication system with Bluetooth technology, cordless pods powered by lithium ion batteries, and components made from lightweight magnesium.

Get Info Now

39 Piece Strut/Shock Installation Tool Kit, No. 78554

Product From JS Products, Inc. (Steelman)

The JS Products/Steelman PRO 39 Piece Strut/Shock Installation Tool Kit, No. 78554, is designed to save technicians time and money when dealing with shocks and struts. With this kit, damaging a shock or strut by breaking the seal on the shaft will not be an issue. Technicians can select the bit and the corresponding socket for the strut or shock. When used together with a combination wrench and ratchet with a socket, the removal and installation of shocks and struts is easy, says the company.

Get Info Now

John Bean V3400 Wheel Alignment System

Product From Snap-on Equipment

The John Bean V3400 Wheel Alignment System, from Snap-on Equipment, provides precise alignment readings in less than two minutes for increased productivity and less waiting for measurements. Wireless communication between the measurement towers eases installation and mobility. Automatic vehicle height tracking saves time and makes technicians more efficient. Software productivity enhancers like automated caster sweep, 3D animations, rolling radius and cross diagonal measurement, A-arm adjust and EZ Toe will get the job done right the first time. A comprehensive vehicle database with frequent updates ensures the most current information is readily available and VIN scanning speeds the vehicle selection process. Lightweight AC400 clamps engage the tire, eliminate the possibility for damage to the rim. 

Get Info Now

Hunter Alignment Sensors, DSP600

Product From Hunter Engineering Company

The Hunter Alignment Sensors, No. DSP600 feature a patented design that speeds alignments, reduces downtime and provides a higher return on investment, according to the company. DSP600 Sensors utilize four high-resolution, digital cameras that offer the same high-speed screen updates as conventional sensors. Mounted on a pedestal, high enough to stay out of harm’s way, the patented four-camera system projects a wide field of view to continuously monitor wheel target position and orientation over a range of alignment lift heights. 

Get Info Now

S2G LPG Commercial Chassis

Product From Freightliner Trucks

The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.

Get Info Now

Steerable Auxiliary Lift Axle Suspension System, No. RSS-233

Product From Ridewell Corporation

The Ridewell Steerable Auxiliary Lift Axle Suspension System, No. RSS-233, includes a compact mounting envelope and an easy-mount adjustable-hanger system. RSS-233 suspensions are manufactured with a dual-draw key kingpin design to extend kingpin life and fully-cast axle ends for increased strength and durability. Additional features include 7" to 18" ride heights, a 13,200-lb capacity, a pre-plumbed air tank option, polyurethane pivot bushings, 1'' and 2'' spacer kit options and control arms angled for lateral stability. The RSS-233 ships fully-assembled for efficient installation.

Get Info Now

Winalign HD Alignment System

Product From Hunter Engineering Company

The improved Hunter Engineering Winalign HD Alignment System can now use four or six revolutionary DSP700T heavy duty alignment sensors to provide accurate readings, even for three-axle trucks, in just four minutes.  DSP700T sensors use exclusive roll-forward compensation to compensate all sensors at once without the need to jack each axle. DSP700T sensors are cordless and are compensated at the same time by Hunter’s unique pusher. These sensors are accurate to a range of 600" (1,524cm) to cover all truck, bus and trailer lengths. When equipped with the time-saving capabilities of Hunter's optional Fully Integrated Alignment Turnplate Kit (FIA), the system produces full vehicle measurements in as little as four minutes. 

Get Info Now

Chassis Liner Heavy Duty Trucker Frame Rack

Product From Chief Automotive Technologies

The Chassis Liner Heavy Duty Trucker Rack from Chief can service everything from half-ton pickups to triple-axle tractors and vocational trucks. The rack features 360-degree pulling capabilities and can be equipped with four, six or eight towers. The wheel-less towers ride on rails that circle the bed and the heavy duty loading ramps come with rolling jacks, so a single technician can complete the entire setup process. An optional winch assembly is available to pull disabled vehicles onto the bed. A roller assembly is provided for downward pulls and chain locks maintain tension throughout the pulling process. 

Get Info Now

Vistar 3000 series imaging aligner

Product From RAV America

RAVAmerica's Ravaglioli Vistar 3000 series imaging aligner operates faster than competing alignment equipment, according to the company. The machine requires no rolling or pushing of the vehicle. It also quality checks the lift level condition and compensates for level error and can be used in more than one bay so the user can turn an ordinary bay into an alignment bay. The bluetooth wireless data transmission allows the user to measure a vehicle in one bay with the console located in another area of the shop. Its accuracy is unmatched and can be used at any lift height or with any lift brand.

Get Info Now