General Technologies' TA100 Digital Tachometer and Engine Analyzer is an enhanced version of the company's wireless tachometer and secondary ignition voltage meter. This new version incorporates many new features, like a rugged flexible antenna, protective rubber holster, enhanced detection range for the tachometer function, more accurate secondary ignition voltage measurements, maximum and minimum displays in real time, a function that lets the user adjust the KV scale, a quick response time and a hard carrying case.
TA100 Digital Tachometer and Engine Analyzer
Product From General Technologies Corp.
Expand for more details on this Product
- Product From Pico Technology
The WPS500X Automotive Pressure Transducer from Pico Technology provides quick and accurate pressure analysis of many automotive systems. It measures up to 500 psi, has zoom function for enhanced analysis, features an internal rechargeable LiPo battery, and has an integrated pressure relief/bleed-off valve.
- Product From Snap-on Equipment
The John Bean Integrity Test Drive Engine Analyzer from Snap-on Equipment performs a complete vehicle inspection, providing customers with a 'health' snapshot of their vehicle in less than 10 minutes; and generates a comprehensive vehicle condition report that documents the inspection and helps the service advisor communicate the needed services to the customer. The Integrity Test Drive quickly conducts multiple inspections of the vehicle including alignment, battery, brake efficiency, brake pad thickness, diagnostic codes, and generates a color-coded report that highlights the results of each inspection.
- Product From Derossi Massimo SRL
The Derossi Massimo MM03 Diesel Common Rail System Diagnostic Tool allows technicians to fully diagnose the diesel common rail system without removing any components from the engine. The MM03 can perform the following functions: pressure gauge test in any working condition with automatic recognition of pressure sensor make, as well as testing its efficiency; management and controlled testing of the high pressure pump efficiency by allowing pressure regulation from 0 to 1,500 bar; management and control testing of pressure and flow regulators efficiency by driving them in complete autonomy from the ECU; and, the injectors integrity, with back leakage/return flow kit, at different pressures decided by the operator of the tool.
- Product From FossForward Innovations
The FossForward Innovations’ LLG-5 Engine Heater Tester is a two-in-one tool that tests both the engine heater and its power source extension cord. A specific amp reading removes the guesswork from deciding when to replace an engine block heater. Easy to use, the LLG-5 can significantly reduce the number of needed service calls due to cold weather starting problems. Works well for regular PMs in the shop, and portable enough for vehicle site testing.
- Product From General Technologies Corp.
The FaultFinder short/open circuit finder and tracer, No. FF310, from General Technologies will work on any electrical circuit with voltages from 6V to 42V. Its wide working voltage range, automatic open/short detection, adjustable sensitivity and flexible antenna probe enable the technician to troubleshoot an array of common electrical problems without having to untie wire harnesses or remove body panels.
- Product From IOSiX
IOSiX J1939/J1708 Datalogger
* J1939 CAN interface
* J1708 differential RS-422 interface
* Fully configurable datalogging
* Capable of recording all messages on the data bus
* Robust injection-molded casing and connectors
- Product From IOSiX
IOSiX OBD-II Datalogger
* Support for all existing OBD-II protocols
* Small and easy to use - plug-in and go!
* Easily configurable data logging (parameters, rates)
* Capable of logging any information on the vehicle data bus,
- Product From SPX Service Solutions
OTC's Professional Master Fuel Injection Kit (P/N 6550PRO) is a full coverage tool set developed to accommodate nearly every fuel injection system application on most domestic and foreign engine platforms 1988 to present. Included are OTC fuel injection adapters, a 0-100 psi analog pressure gauge with manifold for accurate pressure reading and basic flow testing, hose assemblies and a variety of seals, fuel line and clamps. There is a comprehensive application guide, plus a laminated card showing color images of components with part numbers for quick reference. The blow-molded case with its removable lid allows for convenient storage and easy access to components, yet closes tightly for safe transport of the kit.
- Product From NEXIQ Technologies
Diagnostics for heavy-duty truck engines and systems has advanced with the arrival of the Pro-Link GRAPHIQ™ system,. Introduced by NEXIQ Technologies, a Snap-on Incorporated brand, the new unit builds upon the cumulative expertise of the Pro-Link® Plus system and supports more than 50 manufacturer specific applications, while adding informative graphing capabilities and a brilliant color display.
- Product From Edge Products Inc.
Edge Products now offers an innovative way to mount the company's Attitude diesel monitor/controller. The new Edge Attitude Pillar Mount conveniently positions the Attitude within the driver's reach and peripheral line of sight. Each mount is a direct replacement for the factory driver's-side A-pillar.