Safety Pumping Systems' Chassis Grabber allows the mounting of any type of equipment on a truck frame without the need for drilling holes. This eliminates the risk of damaging air lines, wire harnesses or surrounding equipment, or drilling-related injuries. Installed with just a pneumatic impact wrench, the mounting system provides a "base" for equipment mounting where in any equipment can be adjusted, moved or removed easily, leaving the truck frame intact with no extra holes
- Product From TRP Parts
Made with a unique fabric material, TRP Air Springs have a higher burst rate for longer life, according to the company. The volcanized material is chemically formulated to withstand ozone effects and resist cracking and splitting. Optimized wall thickness provides better fatigue life, while still offering a lightweight air spring. Available for all makes and applications of trucks and trailers, TRP Air Springs are 100-percent leak-tested.
- Product From Dana Corporation
Dana's Spicer EconoTrek tandem axle comes as a lightweight 6x2 configuration that improves performance, reduces maintenance and increases fuel economy for heavy duty line haul tractors. Its design decreases in mechanical drivetrain energy loss and reduces weight by up to 400 lbs when compared with a traditional 40,000-lb tandem axle arrangement. The tandem axle comes made of high-strength, micro-alloy steel with a thin-wall, square-edge formed axle housing box. This adds significant strength for the axle's vertical load-bearing capabilities, reducing tire wear while simplifying suspension and chassis installation at a lower weight.
- Product From Mitsubishi Fuso Truck of America, Inc.
Mitsubishi Fuso makes a wide range of genuine repair and replacement parts available for fleets of all sizes. FUSO parts offer the same specifications, longevity and performance as the factory originals, according to the company, and all parts come with a 12-month/unlimited-mileage warranty. Parts inventory is maintained in Logan Township, NJ, and at satellite locations in St. Louis, Jacksonville and Sacramento. The company notes it has consistently maintained a better than 98 percent parts fill rate for the past 20 years.
- Product From ATG - Automotive Training Group Inc.
The Automotive Training Group Advanced Body, Security & Chassis Systems Training Manual provides information on a number of different sections of a vehicle.
- Tire Pressure Monitoring – TPMS systems are unique in that every technician in the shop will have to deal with them. Whether you are mounting tires, performing scheduled maintenance, or performing diagnostics, TPMS is unavoidable. Learning to master the tools and techniques opens up some new sources of profit for you and your shop. One technician called TPMS “The new Check Engine light.” The TPMS Section in this manual includes comprehensive coverage of Domestic systems as well as Honda, Toyota & Nissan (and related luxury brands). This manual and class cover a multitude of OEM and aftermarket tools, as well as OEM, aftermarket, and ‘customer’ sensor ID and/or position learning.
- Product From Direct Equipment Supply
The Direct Equipment Supply Model 20 5th Wheel Towing Boom converts any standard fifthwheel road tractor for towing service at a moments notice. With 25,000lbs of lifting capacity and 50,000lbs of pulling capacity, this super duty wrecker unit is more than twice as powerful as our Model 10. Featuring a massive 12" X 12" boom, this super sturdy unit easily pulls the larger vehicles like dump trucks, drilling rigs, concrete mixers and large buses. Perfect for salvage operations turning scrap into gold or recovery for fleets with larger equipment. Also makes a great addition to any heavy duty wrecker service fleet. This auction is for the Model 20 Deluxe which comes electric/hydraulic/remote control with on board battery system and the Backstop™
- Product From AMSOIL INC.
AMSOIL Synthetic Fifth-Wheel Greasecomes as a lubricant engineered to provide protection and performance in the harsh operating environments found in fifth-wheel hitches used in trucking and trailer applications. It provides excellent protection against wear and corrosion while withstanding high loads and pressures. It stays in place and resists water washout, providing long service life. The grease comes available in a convenient "no-mess" squeeze tube for ease in application.
- Product From Mueller-Kueps LP
The Mueller-Kueps Suspension Wear Indicator, No. 432 910, can be applied onto the steel with a special injection technique, allowing for the inspection of moving parts in the lower suspension of a vehicle on any surface. It eliminates known struggles such as moving wheels in the unloaded condition, specially shaped tire irons, wood blocks, pry bars and etc. It also helps increase workplace efficiency, eliminating the need for a second mechanic to check for other moving parts of the suspension.
- Product From Watson & Chalin Mfg
Watson & Chalin's SL-2065 Tru-Track comes as a 20K self-steering axle and lift suspension system with an industry-leading 25-degree wheel cut. Weighing 1327 lbs, it can be used with 445/65R22.5 tires and an air-disc brake option makes. It has a parallelogram design that provides a 27" packaging space allowing for easier configurations and can be offered in ride heights from 8" to 13" featuring a quick-change ride height system. It comes with a five year warranty.
- Product From Tiger Tool International
Tiger Tool's Jost 5th Wheel Bracket Pin Puller, No. 10705, features a 20 ton hydraulic cylinder that generates over 40,000 lbs of pulling power to provide fast, safe and effective removal of even the most seized fifth wheel bracket pins. The machined components come with a black oxide coating to resist corrosion. This tool can also be ordered as an add on kit (No. 15060) to the Pin and Bushing Service Kit (No. 15000) to allow for maximum flexibility.
- Product From Hendrickson International
Hendrickson's online Vocational Truck Suspension Selector Tool can be accessed on their website and helps users obtain rear suspension recommendations for general truck and tractor operations in vocational and severe-service applications. Results are calculated based on selections related to intended application, vehicle axle configuration, gross rear axle weight rating and suspension type. The recommendations can then be printed for future reference or researched further by following the quick links back to the Hendrickson website for more information on specific Hendrickson suspension systems.