Compressor

Compressor

Compressor Product Image

Radiator Works carries a very large selection of compressors (Sanden and Aftermarket) for Heavy Duty trucks - Class 6, 7, & 8 as well as buses. Please call for pricing.

 

 

Expand for more details on this Product

Clamp Jacket

Product From PYI

The PYI Clamp Jacket is made from durable EPDM rubber that can withstand temperatures up to 300 degrees F and steam up to 400 degrees. Clamp Jackets are available for 1/2" and 5/16" hose clamps. The Clamp Jacket has an extended lip located on the bottom that acts as a guide for sliding it easily over the hose clamp tail. It is also has inside notches, which increase the grip strength onto the hose clamp. 

Get Info Now

EZ Oil Drain Valve

Product From Global Sales Group

The Global Sales Group EZ Oil Drain Valve, for use on trucks, buses and industrial engines, replaces the traditional oil drain plugs for clean and easy oil changes. The valve comes with optional hose ends that allow easy hose connections to drain oil away from the engine. The hose ends can be easily screwed into the valve and can be removed at any time.The valve features a ball-valve mechanism for leak-proof operations, it is nickel-plated for extra protection, it has an O-ring seal for improved sealing ability and a rubber lever cover to easily open and close. Once installed, without any special tools, simply turn the lever to drain oil. Turn the lever back and it locks closed. A hose may be attached to the nipple-end to drain the oil away from the engine.

Get Info Now

Expansion Tank Service Kit

Product From Standard Motor Products

Standard Motor Products' Expansion Tank Service Kit deal with the fact that the OE designed expansion tank system can fail over time, leaking coolant and increasing the risk of over-heating. The thermostat located on the oil cooler can often be damaged while removing the expansion tank. THe kits provide the expansion tank, oil cooler thermostat and coolant level sensor to replace the damaged unit and restore the vehicle's proper cooling functions.

Get Info Now

KoolKare Plus Hybrid-Capable A/C Recycler, No. EEAC325BH

Product From Snap-on Inc.

Snap-on's KoolKare Plus Hybrid-Capable A/C Recycler, No. EEAC325BH, enables technicians to service both hybrid and non-hybrid vehicles effortlessly, thanks to a menu-selectable function that provides the ability to clear any residual oil from the recycler's fluid circuit and hoses, minimizing the risk of PAG to POE oil cross-contamination. It meets new refrigerant recovery standards J-2788 for high-voltage compressors and features an A/C capacities database and automatic air purge. Snap-on recommends that users purchase two manual oil injectors (No. ACT53134A), one designated for use with POE oils for use in hybrid electric compressor systems and one for PAG oils.

Get Info Now

Modulator Fully Variable Fan Drive, No. RCV250

Product From Horton Inc.

Horton's Modulator Fully Variable Fan Drive, No. RCV250, helps improve engine cooling efficiency for global applications. Coming as an integrated belt-driven fan drive of lighter, compact design, engineered to turn larger fans that require higher torque. Its variable operation reduces fan noise, increases fuel efficiency and available horsepower. Product features include an integral fan speed sensor for close-loop control and a magnetic design that speeds reaction time, which in turn increases modulation and cooling. Its reservoir, actuator and valve system design allow for faster response time and lower off-speed to maximize efficiency.

Get Info Now

Cooling System Tester, No. SVTS262C

Product From Snap-on Inc.

Snap-on's Cooling System Tester, No. SVTS262C, tests pressure caps and cooling systems for leaks on a wide variety of domestic and import vehicles. Cap has rotating lever for fine pressure adjustment. Set features hand pump and tester head with 12" hose that reads in both PSI and kPa. Improved material in pump head is corrosion resistant. Includes SVT262-28A, TAB10036 and TA38C Radiator Adaptors plus SVTS262-23 Storage Case.

Get Info Now

A/C Line Repair 5/16" Fittings

Product From S.U.R.& R. Auto Parts Inc.

S.U.R. & R.'s A/C Line Repair 5/16" repair fittings can be used to make on-the-car repairs to damaged rubber and aluminum lines including pinholes, cracks and kinks. Includes a compression block off fitting for use on SUV's and vans with leaking lines or failed rear A/C components. Featuring advanced compression union and hose adapter technology, all connections are made by hand and tightened with the use of a standard wrench. Other benefits include all-alluminum construction to avoid corrosion and double seal compression union technology.

Get Info Now

Infrared Refrigerant Leak Detector, No. 22791

Product From Robinair, Bosch Automotive Service Solutions

Robinair's Infrared Refrigerant Leak Detector, No. 22791, fits naturally in the user's hand and its ruggedized construction stands up to abuse that most other leak detectors cannot handle. It automatically recalibrates in highly contaminated areas to help pinpoint the exact location of a leak and it won't trigger on oil or moisture. Eight-hour battery life lets you work all day before recharging and the advanced infrared sensor is designed to last a minimum of 10 years.

Get Info Now

Nissan VQ35DE engine

Product From JASPER Engines & Transmissions

Jasper Engines and Transmissions now carries the Nissan VQ35DE, a 3.5L DOHC V6 with variable valve timing (VVT), for the 2002-2006 Altima, 2002-2008 Maxima, 2002-2007 Murano and 2003-2006 Quest. The engine includes all timing components with a new water pump, timing chain tensioners, new updated cam chains to correct an upper chain noise issue and new intake camshaft actuators to eliminate any VVT issues. The pistons have been re-engineered to match original equipment compression ratios, and include a graphite coating on the skirts to prevent dry start-up and piston scuffing. Has a three year/100,000 mile warranty.

Get Info Now

Pre-formed harnesses and bundles of Nylon Air Brake

Product From Parker Hannifin Corp.

Pre-formed harnesses and bundles of Nylon Air Brake from Parker Hannifin can reduce installation time by more than 70 percent. Designed for use in tractor, trailer and other mobile air brake applications, time studies show an average chassis harness installation took four employees about 40 minutes to complete. However, with a Parker preformed harness, installation time dropped to 10 minutes and only one employee was required to complete the install. It comes in sizes 1/8" O.D. up to 3/4" O.D. and has a maximum working pressure of 150 psi. It can operate in temperatures as high as 200 degrees F.

Get Info Now