Snap-On Ford Ignition Control Pressure Sensor Socket

Snap-On Ford Ignition Control Pressure Sensor Socket

Snap-On Ford Ignition Control Pressure Sensor Socket Product Image
The Snap-on Ford Ignition Control Pressure Sensor Socket (S6196KR) was created specifically to make removing and installing sensors easier on 2002 and 2003 Ford 6.0-liter diesel truck engines. Designed with the technician in mind, an internal spring retentions mechanism securely holds sensors to help eliminate the chance of dropping the sensor in the engine compartment. The 3/8-inch square drive and shallow walls also allow technicians to access ICP sensors in open and tight quarters.

Expand for more details on this Product

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Duramax Turbo Vaine Position Sensor Socket, No. 12400

Product From SP Tools/Schley Products Inc.

The Schley Duramax Turbo Vane Position Sensor Socket, No. 12400, has been designed to remove the turbo vane position sensor on late 2004 to present GM medium duty trucks with Duramax engines. The tool also works on light duty trucks and

Get Info Now

OE-Fit Oxygen Sensors

Product From Bosch Diagnostics

Bosch's 82 new OE-fit oxygen sensors covers 21.9 million vehicles in the United States and Canada including a variety of domestic and import applications – both Asian and European. Besides a host of passenger cars, minivans and SUVs, the new coverage also includes several hybrid vehicles. These part numbers cover General Motors, Ford, Chrysler, Nissan, Lexus, Mazda, Toyota, Infiniti, Kia, Mitsubishi, Hyundai, Volvo, BMW and other makes. 

Get Info Now

ST05 Oxygen Sensor Tester and Simulator

Product From General Technologies Corp.

The General Technologies ST05 Oxygen Sensor Tester and Simulator provides a simple interface for test and diagnostic on any oxygen sensor to quickly determine whether the sensor is defective and needs replacement. Designed as both a stand-alone tool or as a complement to any scanner during the diagnostic process, The St05 is compatible with all types of oxygen sensors. The ST05 displays the sensors output signal in real-time in a bar graph, allowing to diagnose "lazy" sensors which may not trigger DTCs but cause drivability problems. 

Get Info Now

Oxygen Sensor Analyzer

Product From Lenehan Research

Lenehan's Oxygen Sensor Analyzer displays real-time data: closed-loop operation of 0V to 1V zirconia sensors, tests PCM control of the engine and tests the O2 sensor for range and speed using the recognized CA BAR 100ms Snap Throttle Test (pass or fail within 5 percent accuracy).

Get Info Now

Oxygen Sensor Wrench No. KL-0132-82A

Product From Klann Tools

The low-profile 6- and 12-point combination head and a curved handle with comfortable hand grip of Klann Tools' Oxygen Sensor Wrench, No. KL-0132-82A, give techs the clearance and extra leverage needed for removing and installing oxygen sensors, especially when they are positioned close to the floor pan. This wrench fits all 7/8"oxygen sensors and is finished in durable satin chrome.

Get Info Now

SEQUOIA Water Sensor Socket

Product From Auto Tool Pro Inc

The SEQUOIA Water Sensor Socket from Auto Tool Pro Inc. is used to remove or install the water sensor on the GM 6.6L Duramax Diesel Engines. Applications include Chevy/GMC pick-ups and Chevy/GMC Medium Duty trucks. The water sensor is a 12-sided unit that can be easily damaged by pliers. It is removed and re-installed each time the fuel filter is replaced.

Get Info Now

Oxygen Sensor Wrench

Product From Klann Tools

From Klann Tools, Inc., the low-profile 6 & 12-point combination head and a curved handle
with comfortable hand grip give you the clearance and extra leverage
needed for removing and installing oxygen sensors, especially when

Get Info Now

Shielded Oxygen Sensor Socket, No. 67750

Product From SP Tools/Schley Products Inc.

SP Tools designed the Shielded Oxygen Sensor Socket, No. 67750, for shielded oxygen sensors currently found on Toyota and Lexus vehicles. This tool features a 12-pt. double hex enabling techs twice the number of "clock angle" attachment positions versus a 6-pt. design. For maximum strength, this tool is forged from steel and comes in the SP High Tech black finish.

Get Info Now

Shielded Oxygen Sensor Socket No. 66750A

Product From SP Tools/Schley Products Inc.

SP Tools' Shielded Oxygen Sensor Socket, No. 66750A, features a 12-pt. double hex enabling techs twice the number of "clock angle" attachment positions versus a 6-pt. design. This tool works on the following:

Get Info Now