EGRT® or Exhaust Gas Recirculation Technology diesel retrofit system

EGRT® or Exhaust Gas Recirculation Technology diesel retrofit system

EGRT® or Exhaust Gas Recirculation Technology diesel retrofit system Product Image
Johnson Matthey's Environmental Catalysts and Technologies (ECT) group announced that the California Air Resources Board (CARB) has verified its EGRT® or Exhaust Gas Recirculation Technology diesel retrofit system for use on select Cummins, Detroit Diesel, and International engines. These engines represent some of the most popular engines found in urban buses and municipal vehicles.

Expand for more details on this Product

GM 6L80E and 6L90E transmissions

Product From JASPER Engines & Transmissions

The Jasper Engines & Transmissions GM 6L80E and 6L90E transmissions are remanufactured 6-speed transmissions available on exchange for the following 2010-2012 vehicles: Chevrolet Suburban, Avalanche, Tahoe, Silverado 1500-3500, 

Get Info Now

Major Rebuild Kit, No. KIT-RX-67NTL

Product From Fontaine Fifth Wheel Co.

Fontaine Parts Connection's Major Rebuild Kit, No. KIT-RX-67NTL, can be used on popular Fontaine fifth wheel models. It combines six smaller kits into one to streamlined repair process and saves fleet operators money.

Get Info Now

Air Intake Throttle

Product From Norgren Global Vehicle Technologies

Norgren's Air Intake Throttle precisely regulates airflow so that emissions control systems operate at peak efficiency. Common techniques for reducing nitrogen oxides (NOx) and particulate matter or soot to meet 2013 EPA Tier IV Final Emissions Regulations include Exhaust Gas Recirculation (EGR), Selective Catalytic Reduction (SCR) and Diesel Particulate Filters (DPF). When used as a tandem they manage the airflow essential for boosting the EGR while maintaining high exhaust temperatures for maximum SCR and DPF efficiency.

Get Info Now

Push Rod Remover, No. 48300

Product From Lisle Corporation

The American-made Push Rod Remover, No. 48300, from Lisle comes redesigned for newer 3.5L and 3.6L GM Engines. It also works on GM V6 2.8L, 3.1L and 3.4L motors. The tool quickly removes push rods so the user can replace the intake gasket. There is no need to loosen and retighten the rocker arm with this tool, because it pivots the rocker arm to compress the valve spring and free the push rod for removal. 

Get Info Now

Torque Converters

Product From JASPER Engines & Transmissions

Jasper Engines & Transmissions' rebuilt Torque Converters can now be purchased for the following 1989-2007 applications: Chrysler 47RE/48RE Dodge, Ram, 2500 - 3500; and Ford E4OD/4R100/5R110 Ford F-150 - F-550, Ford E-150 - E-350. These converters can be used on many heavy duty diesel engine applications and light duty vehicles.The converters feature a billet steel front cover that prevents failure due to thermal expansion. Each converter is also balanced to within three grams to eliminate any unwanted vibrations in either the engine or transmission.

Get Info Now

Pushrod Cleaning Brush

Product From Goodson Tools and Supplies

The Pushrod Cleaning Brush from Goodson has tapered bristles to make cleaning pushrods with an ID down to .080" easy. The brush also measures 12" long to fit most pushrods. It's important to clean the insides of your pushrods when rebuilding an engine, because not cleaning the ID of the pushrods risks contaminating the engine. A hot tank often cannot get the gunk and sludge off the pushrods.

Get Info Now

Handheld gas analyzers, No. IR-6000

Product From Infrared Industries

The Infrared Industries handheld gas analyzer, No. IR-6000, weighs less than 2 lbs, and measures only 7.5” in height, 3.5” in width and 2” in depth. These analyzers come in various configurations and prove to be highly accurate and reliable, according to the manufacturer. The IR-6000 series gas analyzers can measure up to five gases—chosen from over 270 different gases—simultaneously utilizing both NDIR and chemical luminescence sensors. Each unit contains Infrared Industries manufactured elements, which include a filter, pump, optical bench and detectors. Comes with a multi-language LCD display, which allows text to be displayed in English, Spanish or Arabic. Can record data and be connected to PC.

Get Info Now

Caterpillar C7 Common Rail Complete Remanufactured Diesel Engine

Product From JASPER Engines & Transmissions

Jasper Engines and Transmissions offers the Caterpillar C7 Common Rail engine as a JASPER Remanufactured diesel in its Complete format. It replaces the earlier non-Common Rail version of the C7. The Jasper Remanufactured C7 Complete Common Rail engine includes the block; head with injector tubes; crankshaft; connecting rods; camshaft; camshaft roller assemblies and push rods; front cover oil pump and pan; oil cooler; oil filter assembly; bell housing; front and rear seals; valve train; and rocker assemblies. The engine includes a JASPER specially-designed Finish Gasket/O-Ring Kit to prepare the engine for installation and is covered by a one-year parts and labor warranty.  

Get Info Now

Valve Spring Benches Nos. PSB-5000 and CF-500

Product From Goodson Tools and Supplies

Goodson offers a wide range of valve spring compressors, including two valve spring benches. The pneumatic model (No. PSB-5000) comes designed to work on virtually any multiple valve head and can be used on heads with recessed springs. The tool's pneumatic valve support  holds the valve closed as users compress the spring. This press includes a head that adjusts 25 degrees in either direction, a table that adjusts 45 degrees to the front and 30 degrees to the rear and a foot pedal for hands-free operation. The manual valve spring bench (No. CF-500) can be used to work on heads with recessed springs. The head can be adjusted 25 degrees to the left or right for canted valves. Both units ship fully assembled.

Get Info Now

Pneumatic Valve Spring Bench No. PSB-5000

Product From Goodson Tools and Supplies

Goodson offers a wide range of valve spring compressors, including the pneumatic model No. PSB-5000, designed to work on virtually any multiple valve head and ideal for heads with recessed springs. A key feature is the pneumatic valve support that holds the valve closed as you compress the spring. Features include a head that adjusts 25 degrees in either direction, a table that adjusts 45 degrees to the front and 30 degrees to the rear and a foot pedal for hands-free operation. The unit ships fully assembled. 

Get Info Now