FE Cabover Models

FE Cabover Models

FE Cabover Models Product Image
Mitsubishi Fuso, Truck of America, Inc. unveils a new line-up of 2005 Mitsubishi Fuso cabover medium-duty trucks. Eight models cover weight ratings from class 3 through class 7, and address virtually every vocational need from dry freight, refigerated delivery, landscaping and delicate cargo transport to auto recovery, heavy duty hauling, municipal roadwork and snow plowing.

Expand for more details on this Product

S2G LPG Commercial Chassis

Product From Freightliner Trucks

The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.

Get Info Now

Line of hydraulic rams

Product From Porter-Ferguson/Lowell Corp.

Porter-Ferguson's hydraulic rams can generate instant power in any position. Built for maximum flexibility and trouble-free operation, the product group comprises three lines: Speed-Midget Standard Duty Rams, Pull Rams and Hydro Chief Heavy Duty Rams. All products feature quick disconnect couplings to get them into service faster. All have special U-cup packings for longer life, better sealing and easy, speedy repair. Made from tool steel to stand up to tough usage. The SM0100 spreader jack can be used with all Speed Midget jacks to open up confined areas for easy finishing. Include a lifetime warranty.

Get Info Now

Wireless ChassisEAR No. 73202

Product From JS Products, Inc. (Steelman)

The Steelman 97202 Wireless ChassisEAR detects squeaks and rattles throughout a car or truck’s chassis. This tool detects noises that cannot be duplicated in the stall. Noises can be transmitted up to 50' from transmitter to receiver. No messy wires to string, this kit includes four clamp-on inductive sensors, allowing technician to perform multiple point tests. Technicians can listen to gears, bearings and suspension while under load so problems can be more accurately pinpointed.

Get Info Now

CB400 Air Suspension platform

Product From SAF-Holland

SAF-Holland provides a base axle offering to the CB400 Air Suspension platform creating the CB4000 Series. The CB400 incorporates an advanced axle alignment feature, a highly engineered cast trailing arm, and patent pending bushing technology on their high-strength slider. The CB4000 Air Suspension/Slider/Axle System with Swing-Align is now available at most major OEMs in North America.

Get Info Now

Custom-built water truck bodies

Product From McLellan Industries Inc

McLellan manufactures a full line of unique water truck bodies built for the construction, mining and agriculture industries. Each tank is rolled in one piece with only a single, longitudinal weld. This design reduces leakage over tanks welded together in sections, says the company. All McLellan tanks rest on a sub-frame designed for increased surface area, reducing the stress on key sections of the tank for an elongated lifespan. These tanks rest on shock-absorbing hold-down kits and a vulcanized rubber absorption pad system called PermaSlat mounting. These key design features extend the life of the tank from a few years to decades. Trucks range from 1,000 gallons to 5,600 gallons, and are available in multiple configurations best suited to a fleet's needs.

Get Info Now

Fully Customizable Lube Trucks

Product From McLellan Industries Inc

Utilize a full line of mobile, preventative maintenance vehicles designed to bring fuel, lubricants and maintenance equipment to the job site. The McLellan Industries fully customizable line of lube equipment

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

39 Piece Strut/Shock Installation Tool Kit, No. 78554

Product From JS Products, Inc. (Steelman)

The JS Products/Steelman PRO 39 Piece Strut/Shock Installation Tool Kit, No. 78554, is designed to save technicians time and money when dealing with shocks and struts. With this kit, damaging a shock or strut by breaking the seal on the shaft will not be an issue. Technicians can select the bit and the corresponding socket for the strut or shock. When used together with a combination wrench and ratchet with a socket, the removal and installation of shocks and struts is easy, says the company.

Get Info Now

LumenX Series 7 safety lights

Product From Peterson Manufacturing Co

The Peterson Mfg. LumenX Series 7 safety lights are powered by white-diode LEDs and are built to shine bright for visibility and safety in any weather. The lights feature high-grade plastic resins and fully-integrated insert molding for super protection. This series includes S/T/T lights, turn signals, backup lights and work lights. LumenX Series 7 models include red, amber and white in both 4” rounds in seven- and nine-diode versions, and ovals in seven- and 10-diode versions. Seven-diode Rounds and Ovals are also available with the industry-standard PL3 connection. All models can be ordered with AMP-compatible connections, integrated voltage regulation is supplied on all models, and multi-volt design is available on some models.

Get Info Now

Aero Clad Bumper for the Mack Granite

Product From Hendrickson International

The Hendrickson Aero Clad bumper for the Mack Granite offers 32 lbs of weight savings and requires less maintenance than the standard metal bumper, according to the company. The bright mirror-like finish is 10 times thicker than chrome, which helps resist corrosion. Unlike painted or chrome bumpers, Aero Clad bumpers do not require touch-ups and will not chip or rust. Aero Clad bumpers are offered for both set-forward and set-back axle Mack Granite truck models and with different light and tow-hole configurations. Aero Clad bumper models are available as current options and as aftermarket replacements.

Get Info Now