SAF-Holland provides a base axle offering to the CB400 Air Suspension platform creating the CB4000 Series. The CB400 incorporates an advanced axle alignment feature, a highly engineered cast trailing arm, and patent pending bushing technology on their high-strength slider. The CB4000 Air Suspension/Slider/Axle System with Swing-Align is now available at most major OEMs in North America.
CB400 Air Suspension platform
- Product From Freightliner Trucks
The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.
- Product From Porter-Ferguson/Lowell Corp.
Porter-Ferguson's hydraulic rams can generate instant power in any position. Built for maximum flexibility and trouble-free operation, the product group comprises three lines: Speed-Midget Standard Duty Rams, Pull Rams and Hydro Chief Heavy Duty Rams. All products feature quick disconnect couplings to get them into service faster. All have special U-cup packings for longer life, better sealing and easy, speedy repair. Made from tool steel to stand up to tough usage. The SM0100 spreader jack can be used with all Speed Midget jacks to open up confined areas for easy finishing. Include a lifetime warranty.
- Product From JS Products, Inc. (Steelman)
The Steelman 97202 Wireless ChassisEAR detects squeaks and rattles throughout a car or truck’s chassis. This tool detects noises that cannot be duplicated in the stall. Noises can be transmitted up to 50' from transmitter to receiver. No messy wires to string, this kit includes four clamp-on inductive sensors, allowing technician to perform multiple point tests. Technicians can listen to gears, bearings and suspension while under load so problems can be more accurately pinpointed.
- Product From Mitsubishi Engine North America Inc.
Mitsubishi Fuso, Truck of America, Inc. unveils a new line-up of 2005 Mitsubishi Fuso cabover medium-duty trucks. Eight models cover weight ratings from class 3 through class 7, and address virtually every vocational need from dry freight, refigerated delivery, landscaping and delicate cargo transport to auto recovery, heavy duty hauling, municipal roadwork and snow plowing.
- Product From Ridewell Corporation
The Ridewell Steerable Auxiliary Lift Axle Suspension System, No. RSS-233, includes a compact mounting envelope and an easy-mount adjustable-hanger system. RSS-233 suspensions are manufactured with a dual-draw key kingpin design to extend kingpin life and fully-cast axle ends for increased strength and durability. Additional features include 7" to 18" ride heights, a 13,200-lb capacity, a pre-plumbed air tank option, polyurethane pivot bushings, 1'' and 2'' spacer kit options and control arms angled for lateral stability. The RSS-233 ships fully-assembled for efficient installation.
- Product From TRP Parts
Made with a unique fabric material, TRP Air Springs have a higher burst rate for longer life, according to the company. The volcanized material is chemically formulated to withstand ozone effects and resist cracking and splitting. Optimized wall thickness provides better fatigue life, while still offering a lightweight air spring. Available for all makes and applications of trucks and trailers, TRP Air Springs are 100-percent leak-tested.
- Product From Dana Corporation
Dana's Spicer EconoTrek tandem axle comes as a lightweight 6x2 configuration that improves performance, reduces maintenance and increases fuel economy for heavy duty line haul tractors. Its design decreases in mechanical drivetrain energy loss and reduces weight by up to 400 lbs when compared with a traditional 40,000-lb tandem axle arrangement. The tandem axle comes made of high-strength, micro-alloy steel with a thin-wall, square-edge formed axle housing box. This adds significant strength for the axle's vertical load-bearing capabilities, reducing tire wear while simplifying suspension and chassis installation at a lower weight.
- Product From Mitsubishi Fuso Truck of America, Inc.
Mitsubishi Fuso makes a wide range of genuine repair and replacement parts available for fleets of all sizes. FUSO parts offer the same specifications, longevity and performance as the factory originals, according to the company, and all parts come with a 12-month/unlimited-mileage warranty. Parts inventory is maintained in Logan Township, NJ, and at satellite locations in St. Louis, Jacksonville and Sacramento. The company notes it has consistently maintained a better than 98 percent parts fill rate for the past 20 years.
- Product From ATG - Automotive Training Group Inc.
The Automotive Training Group Advanced Body, Security & Chassis Systems Training Manual provides information on a number of different sections of a vehicle.
- Tire Pressure Monitoring – TPMS systems are unique in that every technician in the shop will have to deal with them. Whether you are mounting tires, performing scheduled maintenance, or performing diagnostics, TPMS is unavoidable. Learning to master the tools and techniques opens up some new sources of profit for you and your shop. One technician called TPMS “The new Check Engine light.” The TPMS Section in this manual includes comprehensive coverage of Domestic systems as well as Honda, Toyota & Nissan (and related luxury brands). This manual and class cover a multitude of OEM and aftermarket tools, as well as OEM, aftermarket, and ‘customer’ sensor ID and/or position learning.
- Product From Direct Equipment Supply
The Direct Equipment Supply Model 20 5th Wheel Towing Boom converts any standard fifthwheel road tractor for towing service at a moments notice. With 25,000lbs of lifting capacity and 50,000lbs of pulling capacity, this super duty wrecker unit is more than twice as powerful as our Model 10. Featuring a massive 12" X 12" boom, this super sturdy unit easily pulls the larger vehicles like dump trucks, drilling rigs, concrete mixers and large buses. Perfect for salvage operations turning scrap into gold or recovery for fleets with larger equipment. Also makes a great addition to any heavy duty wrecker service fleet. This auction is for the Model 20 Deluxe which comes electric/hydraulic/remote control with on board battery system and the Backstop™