#710 - 500 Amp Carbon Pile Load Tester

#710 - 500 Amp Carbon Pile Load Tester

#710 - 500 Amp Carbon Pile Load Tester Product Image
The #710 by Electronic Specialists performs variable load testing on 12 volt batteries rated as high as 1000 Cold Cranking Amps. The #710 features large dual meters to display the battery voltage and load current simultaneously, during the test. The carbon pile load current is completely adjustable from 0 to 500 Amps, to match the size and rating of the test battery. The unit features an audible tone indicating the end of the 15 second test. The dual meters are color coded for simple pass/fail test results.

Expand for more details on this Product

MD-AWD-150 Series Dynamometer

Product From Mustang Dynamometer

Mustang Dynamometer offers the MD-AWD-150 Series dynamometer, designed in response to increased customer demand for a lower-cost AWD dynamometer that doesn't sacrifice on performance. The AWD-150 front and rear rollers are mechanically linked with a 98 percent efficient Kevlar belt, and with an optional automatic on/off coupler the dyno can be switched between 2WD and AWD modes. It also has an inside track width range of 18" to 80", a 96" to 122" wheelbase standard (longer available), can measure 2,000 hp and hit a max speed of 175 mph. A full version of Mustang's PowerDyne software package is also included.

Get Info Now

Chassis Dynamometers

Product From MAHA USA LLC

MAHA's MSR 1000 and LPS 3000 Chassis Dynamometers provide continuous measurement, load simulation, engine power determination, emission testing and tachometer testing. The machines feature single and dual rollers, a speedometer test and graphics package, an introduction into vehicle diagnosis under load and modular expansion up for a completer performance test.

Get Info Now

78065 PWM Power Pro

Product From Hickok/Waekon

The Hickok/Waekon PWM Power Pro supplies, measures and displays variable current providing enhanced diagnostics for components and their related wiring harness. Current is supplied to DC and PWM components being tested using Pulse Width Modulation, allowing the current output percentage to be manually adjusted from 0 to 100 percent, in one-percent increments. This tool delivers 0-40 amps and displays actual current draw. This kit includes the main unit with 7' cable, two 3' 40 test leads, two battery clips, two alligator clips, two female spade probes and one male spade probe.

Get Info Now

Power Pic Reach

Product From Mikise Filter Tools

The Mikise Power Pic Reach is the extension arm for the company's Power Pic Pro filter cleaner. The extension arm fits securely onto the comfort grip handle for ease-of-use and it provides extra reach to clean all large reusable filters, inside and out. The linear nozzle design provides an evenly disbursed, wide broadcast and generates a unique water/air agitation action to quickly and thoroughly clean deep down between pleats. The end cap doubles as a tool-within-a-tool for unclogging outlets, if needed.

Get Info Now

Flexible DMM Test Accessory Kit, No. 3604

Product From E-Z-Hook

The E-Z-Hook Flexible DMM Test Accessory Kit, No. 3604, is a comprehensive test kit that includes a variety of connectors including alligator clips, probes and insulation piercing test hooks. The kit includes five different test leads of various lengths. The connectors and test leads are designed to work with most industry standard digital multimeters. The kit variety provides a choice of test connectors that can easily be interchanged depending on the requirement. The insulation piercing XEL test hook has recently been redesigned with shrouded banana sockets on both sides of the handle, allowing for greater flexibility in the field.

Get Info Now

Pro 48" Two-Speed Evaporative Cooler, No. PAC2K482S

Product From Port-A-Cool

The Port-A-Cool Pro 48” Two-Speed Evaporative Cooler, No. PAC2K482S, utilizes high-efficiency cooling media and water to naturally cool up to 4,000 square feet and lower temperatures as much as 30 degrees F. The unit provides 20,000 CFM airflow delivery and features a water reservoir capacity of 40 gallons. Requiring only 12.0 amps, the 48” unit provides an economical, efficient cooling solution. It has a durable one-piece molded polyethylene housing that is rust-free and leak-proof, heavy duty casters to provide easy rolling portability and it is shipped completely assembled.

Get Info Now

ESM Ultra 31/900

Product From Maxwell Technologies

The Maxwell Technologies Engine Start Module (ESM) Ultra 31/900 assumes the starting responsibility for the truck and effectively eliminates cranking problems that come from weak or discharged batteries. T

Get Info Now

TH513 Delphi Jumper Wire and Circuit Replacement Kit

Product From Thexton Manufacturing Company, Inc.

The Thexton TH513 Delphi Jumper Wire and Circuit Replacement Kit is designed to test and replace defective Delphi terminals. This kit includes all of the necessary jumper wires, test leads, terminals, butt splices, terminal release tools and heat shrink to repair most damaged Delphi circuits. If a terminal is deemed defective simply remove the terminal using the correct terminal release tool provided in the kit, cut the defective wire off and splice in a new wire using the parts provided in the kit.

Get Info Now

N500 Series spring rewind reel

Product From Hannay Reels

The Hannay Reels N500 Series high-pressure, low-maintenance spring rewind reel is designed for efficient hose handling in applications such as hydraulics, air and water, and chassis grease for all machine and implement needs. A compact frame and narrow base also allows easy installation in almost any location. 

Get Info Now

Digital Battery Tester No. 12-1015

Product From Associated Equipment

The Associated Equipment 12-1015 Handheld Digital Four-in-One Battery Tester, with Thermal Printer and USB Port, provides an electrical system test in less than three minutes. The 12-1015 tests all types of 12V batteries with a range of 100-1,700 including: CCA for measured voltage of battery, battery CCA rating after test, starter test displaying lowest voltage of battery during start, alternator test and vehicle ground testing for intermittent connections in the electrical system.  The 12-1015 provides a cost-effective handheld tester with the ability to print out test results for the customer or shop supervisor.  Test results can also be downloaded to a shop computer for recordkeeping.  The 12-1015 is OE automotive manufacturer tested and approved, and comes with a heavy duty plastic case with impact protection.

Get Info Now