Medium-Duty Components

Medium-Duty Components

Medium-Duty Components Product Image
ArvinMeritor's components designed specifically for medium-duty truck applications include steer, drive and trailer axles, pneumatic and hydraulic brakes, electronic brake parts, anti-lock brake systems, drivelines, shock absorbers and exhaust systems.

Expand for more details on this Product

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

39 Piece Strut/Shock Installation Tool Kit, No. 78554

Product From JS Products, Inc. (Steelman)

The JS Products/Steelman PRO 39 Piece Strut/Shock Installation Tool Kit, No. 78554, is designed to save technicians time and money when dealing with shocks and struts. With this kit, damaging a shock or strut by breaking the seal on the shaft will not be an issue. Technicians can select the bit and the corresponding socket for the strut or shock. When used together with a combination wrench and ratchet with a socket, the removal and installation of shocks and struts is easy, says the company.

Get Info Now

CC2066 DPF Adapter Kit

Product From Kiene Diesel Accessories, Inc.

The Kiene Diesel CC2066 DPF Adapter Kit is an adapter for the company's multi-functional Clutch Caddy. The CC2066 DPF kit includes a support tray, a matched set of ballistic nylon JackSacks and a 2” Load Hugger Safety Strap to secure the load. The adapter safely handles DPF units of all shapes and sizes. The Caddy now has 16 adapters, which makes this tool an extremely versatile lifting, holding and positioning, safety tool.

Get Info Now

S2G LPG Commercial Chassis

Product From Freightliner Trucks

The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.

Get Info Now

Steerable Auxiliary Lift Axle Suspension System, No. RSS-233

Product From Ridewell Corporation

The Ridewell Steerable Auxiliary Lift Axle Suspension System, No. RSS-233, includes a compact mounting envelope and an easy-mount adjustable-hanger system. RSS-233 suspensions are manufactured with a dual-draw key kingpin design to extend kingpin life and fully-cast axle ends for increased strength and durability. Additional features include 7" to 18" ride heights, a 13,200-lb capacity, a pre-plumbed air tank option, polyurethane pivot bushings, 1'' and 2'' spacer kit options and control arms angled for lateral stability. The RSS-233 ships fully-assembled for efficient installation.

Get Info Now

One Piece Clutch Brake

Product From Babcock Clutch Brake, Inc.

One piece clutch brake. 

Heat treated for long life. 

2 Sizes Available
2 in. 1 PC 200
1 3/4 in. PC175

Get Info Now

Two Piece Clutch Brake

Product From Babcock Clutch Brake, Inc.
  • Installs in 1 hour without pulling transmission
  • Saves down time and money
  • Design - breaking surface protects tabs
  • Heat Treated for long life
  • Recommended for 13 speed transmissions and under
  • Patented: U.S. - Canada
Get Info Now

Total Installation Kits

Product From Betts Spring Company

BettsHD's Total Installation Kits (TIK) for its most popular fenders works on several single axle, half and full tandem axle applications. The kit includes two fenders with vibration absorbing rubber insulators to prolong product life, along with all brackets and hardware necessary to complete installation. Unlike competitive offerings, all BettsHD fenders include mating material hardware designed to reduce corrosion. These popular kits are available in stainless steel, galvanized, aluminum and poly, all supported by a limited lifetime warranty. 

Get Info Now

SL-1187TT

Product From Watson & Chalin Mfg Inc

TRU-TRACK
SELF-STEERING AXLE & SUSPENSION SYSTEM

Tru-Track Series
5 Year Warranty
Maintenance Free with
Huck Fasteners
13,200 lb. Capacity


INTEGRATED SUSPENSION AND AXLE ASSEMBLY

  • Axle Travel: 13.5 in.
  • Axle Lift: 10.5 in.
Get Info Now

Spectrum Modular Viscous Fan Clutch System

Product From Kit Masters

Kit Masters' Spectrum Modular Viscous Fan Clutch System dramatically reduces end user downtime by creating same day access to 99 percent of all viscous fan clutches sold in the last 10 years. By creating several universal viscous drive units (heads), along with interchangeable brackets and adapters, the field of viscous fan drives fhas been reduced to just a few components. This helps get their product immediately, resulting in minimal downtime. Components come backed with a one-year / 100,000 mile warranty.

Get Info Now