Adjusti-Rod® Torque Rods
Product From ZF Lemforder Corporation
ZF Lemforder annouces their new patent-pending Adjusti-Rod® Torque Rods doe heavy-duty truck and bus applications. The Adjusti-Rod, designed for the transverse torque rod position on air suspensions, dampens and isolates noise/vibration transmissions and eliminates shimming.
Expand for more details on this Product
- Product From TRP Parts
Made with a unique fabric material, TRP Air Springs have a higher burst rate for longer life, according to the company. The volcanized material is chemically formulated to withstand ozone effects and resist cracking and splitting. Optimized wall thickness provides better fatigue life, while still offering a lightweight air spring. Available for all makes and applications of trucks and trailers, TRP Air Springs are 100-percent leak-tested.
- Product From Mitsubishi Fuso Truck of America, Inc.
Mitsubishi Fuso makes a wide range of genuine repair and replacement parts available for fleets of all sizes. FUSO parts offer the same specifications, longevity and performance as the factory originals, according to the company, and all parts come with a 12-month/unlimited-mileage warranty. Parts inventory is maintained in Logan Township, NJ, and at satellite locations in St. Louis, Jacksonville and Sacramento. The company notes it has consistently maintained a better than 98 percent parts fill rate for the past 20 years.
- Product From Hendrickson International
Hendrickson's online Vocational Truck Suspension Selector Tool can be accessed on their website and helps users obtain rear suspension recommendations for general truck and tractor operations in vocational and severe-service applications. Results are calculated based on selections related to intended application, vehicle axle configuration, gross rear axle weight rating and suspension type. The recommendations can then be printed for future reference or researched further by following the quick links back to the Hendrickson website for more information on specific Hendrickson suspension systems.
- Product From SuperSprings International Inc
SuperSprings' Coil SumoSprings slide between the turns of front and rear coil springs. Since their proprietary microcellular urethane material offers a progressive spring rate, they provide extra support for the suspension only when needed. A vehicle equipped with Coil SumoSprings will experience less side-to-side body roll, front-end dip and sagging without a compromised ride. The short, cylindrical Coil SumoSprings feature an "H"-shaped cross-section that helps hold them in place. The trapped air within the closed cells of the urethane provides up to 800 lbs of support. It can combine support with a smooth engagement for maximum driver comfort.
- Product From Hadley
Hadley's SmartValve saves drivers time and effort, helps reduce injuries and landing gear damage and can improve fuel economy. Most electronic height control systems have required several separate components: the valve manifold itself, an external sensor and the associated electronics. The component fits within the same envelope as a mechanical height control valve. By conveniently raising the tractor frame over ride height, drivers can reduce the time and effort required in coupling with trailers found at many different ride heights. There eliminates the need to crank the landing gear as often or as far, and fewer trips out of the cab are required for adjustment.
- Product From Betts Spring Company
BettsHD's Total Installation Kits (TIK) for its most popular fenders works on several single axle, half and full tandem axle applications. The kit includes two fenders with vibration absorbing rubber insulators to prolong product life, along with all brackets and hardware necessary to complete installation. Unlike competitive offerings, all BettsHD fenders include mating material hardware designed to reduce corrosion. These popular kits are available in stainless steel, galvanized, aluminum and poly, all supported by a limited lifetime warranty.
- Product From Watson & Chalin Mfg Inc
SELF-STEERING AXLE & SUSPENSION SYSTEM
5 Year Warranty
Maintenance Free with
13,200 lb. Capacity
INTEGRATED SUSPENSION AND AXLE ASSEMBLY
- Axle Travel: 13.5 in.
- Axle Lift: 10.5 in.
- Product From Meritor Inc.
Meritor's MTA25 low-mount and MTA30 low-mount trailer suspensions can optimize performance and weight and be used for vocational applications like single-drop flatbed, double-drop flatbed, loggers and chip hauler trailers. The top-mount MTA25 (25,000-pound capacity) and the top mount MTA30 (30,000-pound capacity) come available with the optional lift kit – a system that efficiently raises select axles, improving maneuverability and extending tire life. Available in painted or galvanized finishes, the lift kit attaches easily and can be installed as original equipment (OE) or field retrofitted.
- Product From Firestone Industrial Products
Firestone Industrial Products' Airtide integrative air-damping system offers a lighter-weight alternative to cab mount suspension applications, providing the functionality of an air spring and shock absorber in a single part. The system is comprised of an exterior bellow made of natural rubber that encompasses a proprietary, shock-absorbing module. Preliminary testing indicates a notable reduction in the transmission and frequency of vibration when compared to traditional air spring/shock absorber or air spring/hydraulic damper configurations. This system offers weight reductions of up to three lbs per spring.
- Product From Firestone Industrial Products
Firestone Industrial Products' Airide Integrated Cab Air-Damping System offers a lighter-weight alternative to cab mount suspension applications, providing the functionality of an air spring and shock absorber in a single part. The system is comprised of an exterior bellow made of natural rubber that encompasses a proprietary, shock-absorbing module. Preliminary testing indicates a reduction in the transmission and frequency of vibration when compared to traditional air spring/shock absorber or air spring/hydraulic damper configurations. The Airide Integrated Cab Air-Damping System reduces driver fatigue, and since the system reduces vibration inputs in the cab structure, there is less wear-and-tear on cab mounting points.