Fuel Heater/Water Separator

Fuel Heater/Water Separator

Fuel Heater/Water Separator Product Image
Webb now offers a smaller fuel heater/water separator specifically designed for small to midrange engines. The 424™ uses engine coolant to hear fuel eliminating the need for fuel blending.

Expand for more details on this Product

Multi-Max F1000 heater controller

Product From Espar Heater Systems

The Espar Multi-Max F1000 heater controller serves the needs of the hydronic line of engine coolant heaters, and gives fleets complete control over their pre-heat coolant heaters. By introducing a desktop programmer and a Micro SD card slot, the Multi-Max gives fleets tamper-proof control of every aspect of every heaters’ operating parameters based on each vehicle’s individual work schedule. Users can program the heater to have as many as four distinct events per day, each with a different start and finish time, triggered on whatever day of the week that vehicle is in use. The controller includes a diagnostic indicator; a tri-colored LED with a simple flash code that notifies drivers when the heater needs either routine or unscheduled attention. Once in the shop, that same flashing code tells technicians the fault code causing the problem.

Get Info Now

E-Delivery Truck Kit

Product From Espar Heater Systems

Espar Heating Systems introduces the E-Delivery Truck Kit. This all-inclusive kit comes with the 17,000 BTU Hydronic five-fuel operated engine pre-heater in an aluminum covered box. A set-and-forget programmable timer and multi-function, dash-mounted switch allows for on-demand heat while operators are on delivery. The increasing environmental pressure for fleets to reduce idling while parked at loading docks and customer locations makes this option attractive to grocery, beverage and any fleet making multiple daily deliveries.

Get Info Now

LLG-5 Engine Heater Tester

Product From FossForward Innovations

The FossForward Innovations’ LLG-5 Engine Heater Tester is a two-in-one tool that tests both the engine heater and its power source extension cord. A specific amp reading removes the guesswork from deciding when to replace an engine block heater. Easy to use, the LLG-5 can significantly reduce the number of needed service calls due to cold weather starting problems. Works well for regular PMs in the shop, and portable enough for vehicle site testing.

Get Info Now

Proheat X 45 Auxiliary Coolant Heaters

Product From PROHEAT/a div. of Teleflex Inc

Proheat X45 auxiliary coolant heaters preheat the engine for easy cold weather starting and produce heat for the sleeper cab with the engine off. Diesel fuel costs, engine idling hours and emissions are greatly reduced. X45 heaters feature an integrated coolant pump and display panel with download capabilities and self diagnostics. Timers and sleeper cabin temperature controls are available.

Get Info Now

Power Pic Reach

Product From Mikise Filter Tools

The Mikise Power Pic Reach is the extension arm for the company's Power Pic Pro filter cleaner. The extension arm fits securely onto the comfort grip handle for ease-of-use and it provides extra reach to clean all large reusable filters, inside and out. The linear nozzle design provides an evenly disbursed, wide broadcast and generates a unique water/air agitation action to quickly and thoroughly clean deep down between pleats. The end cap doubles as a tool-within-a-tool for unclogging outlets, if needed.

Get Info Now

GM 6L80E and 6L90E transmissions

Product From JASPER Engines & Transmissions

The Jasper Engines & Transmissions GM 6L80E and 6L90E transmissions are remanufactured 6-speed transmissions available on exchange for the following 2010-2012 vehicles: Chevrolet Suburban, Avalanche, Tahoe, Silverado 1500-3500, 

Get Info Now

Clamp Jacket

Product From PYI

The PYI Clamp Jacket is made from durable EPDM rubber that can withstand temperatures up to 300 degrees F and steam up to 400 degrees. Clamp Jackets are available for 1/2" and 5/16" hose clamps. The Clamp Jacket has an extended lip located on the bottom that acts as a guide for sliding it easily over the hose clamp tail. It is also has inside notches, which increase the grip strength onto the hose clamp. 

Get Info Now

See Through Oil Filter Assembly

Product From Billet Connection

The Billet Connection See Through Oil Filter Assembly is designed for technicians who want to filter dust and microscopic particles out of oil and be able to visually inspect the larger, filtered particles. This assembly allows visual inspection of the condition of the oil, and inspection of the filter element and contaminants that were filtered out, even when filtering non-transparent engine oil. This is done without unbolting or loosening any fasteners or fittings and without draining, leaking or losing any oil. This filter helps determine if particles are normal, or if they are from components excessively wearing in the engine supplying the filter. 

Get Info Now

Ultra ONE wheel with MagnaForce alloy

Product From Alcoa Wheel Products

The Alcoa Wheel Products Ultra ONE Wheel is 47 percent lighter than steel wheel of same size and can save up to 1,400 lbs per rig, according to the company. The wheel features the MagnaForce lightweight alloy. 

Get Info Now

Modulator Fully Variable Retrofit Packages

Product From Horton Inc.

The Horton Modulator Fully Variable Retrofit Packages, deliver optimized engine cooling for any climate. Aftermarket Modulator retrofit packages replace on/off fan drives for many heavy duty line-haul and severe duty vocational trucks where pneumatically actuated fan clutches over-cycle or do not provide optimum performance. 

Get Info Now