Pro-TEC Insurance

Pro-TEC Insurance

Pro-TEC Insurance Product Image

Pro-TEC Insurance, underwritten by Hanover Insurance Co., protects the technician's tool investment for loss or damage. This policy provides a comprehensive all-risk coverage to get the technician back under the hood again in no time. Coverage is available nationwide; there are no state restrictions.

Expand for more details on this Product

Clip-On Magnetic Parts Dish

Product From V8 Tools Inc.

The V8 Tools Clip-on Magnetic Parts Dish, No. V8 3803, saves technicians time by helping to prevent the loss of missing e-clips, bolts or drain plugs. To use, technicians must clip the V8 3803 anywhere onto themselves as a holster for parts or small hand tools. Three powerful, rare-earth magnets hold the dish securely. This dish is specially designed to hold long parts and tools. It is made of a strong and durable plastic. 

Get Info Now

Spot Weld Drill Bits

Product From Mueller-Kueps LP

Mueller-Kueps introduces a wide selection of high-quality Spot Welding Drill Bits. The drill bits are available in various sizes and three different coatings: Standard High Speed Steel Cobalt Alloyed, Titanium Nitride and Titanium Carbon Nitride. According to the company, these double-coated drill bits allow the highest cutting speeds, interrupted cuts and best profitability due to long life time.

Get Info Now

Large Standard V-DrillGuides

Product From Big Gator Tools

The Big Gator Tools Large Standard V-DrillGuides are offered in standard and metric sizes. V-DrillGuides are manufactured from special heat-treated nickel-alloyed steel for durability and longevity. The V-DrillGuides feature a precision ground base to assure stability and accurate perpendicular alignment of drill bits on flat surfaces. The V-groove allows for perpendicular alignment of drill bits on round and square cornered materials. Large Standard V-DrillGuide drill sizes include: 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64” and 1/2”.

Get Info Now

Extra Long Air Hammer Pneumatic Drifts No. 11600

Product From SP Tools/Schley Products Inc.

The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including shock bolts and suspension arm bolts. These bolts are often too long for conventional pin punches or tapered drifts to push the bolt through a rusty bushing sleeve. 

Get Info Now

Universal Terminal Driveability Kit, No. 16-200

Product From AESwave (Automotive Electronics Services, Inc.)

The AESWave Universal Terminal Driveability Kit, No. 16-200, includes a huge number of items such as a piercing clip that pierces through insulated wires without cutting or stripping insulation and detachable test probes that allow easy cable extension during testing. Alligator clips are ideal for battery terminals or clip connections.

Get Info Now

OBD Aid

Product From CanDo

CanDo OBD Aid is more than just a breakout-box; it is ideal for diagnosing and identifying OBDII-related errors while communicating with a diagnostic scan tool. The display helps by monitoring the voltage supply and indicates if low battery power is an issue. It features a "quick test," which will individually diagnose each pin of the OBDII port.  The data saver cable comes with surge voltage protection, short circuit and polarity protection. The OBD Aid is a fast and easy way to properly check a 16-Pin DLC port prior to scan tool communication or ECU flashing.

Get Info Now

DR Reader

Product From Balcrank Corporation

The Balcrank DR (Digital Registry) Meter provides innovative technology in a digital meter for precise dispensing of fluids. With no calibration required, this meter features Liquid Crystal Polymer gears (LCP), stainless steel shafts, and a precision machined aluminum die-cast fluid chamber to maintain the tight tolerances needed for repeatable accuracy. Together with individual testing for performance and accuracy guarantees precise dispensing regardless of the fluid viscosity, outside temperature and system pressure.

Get Info Now

Utility Brush No. 509SSHQD

Product From E-Z Red Company

The E-Z Red Utility Brush, No. 509SSHQD, cleans rust and corrosion from metal parts and removes paint, for use prior to welding and other applications, using an electric or pneumatic drill. The brush features a steel shaft with quick-disconnect.

Get Info Now

Side Terminal and Group 31 Terminal Brushes, No. 506COSSHQD

Product From E-Z Red Company

E-Z Red Side Terminal and Group 31 Terminal Brushes, No. 506COSSHQD, clean the side terminal battery terminal and Group 31 battery terminal (the center opening to accommodate the threaded stud) using an electric or pneumatic drill. The brush features a steel shaft with quick-disconnect. This tool is recommended for use up to 800 rpm. 

Get Info Now

Top Post Power Battery Brushes No. 505BTSSHQD

Product From E-Z Red Company

E-Z Red Top Post Power Battery Brushes, No. 505BTSSHQD, clean standard top post battery terminal posts using an electric or pneumatic drill. The brush features a steel shaft with quick-disconnect. This tool is recommended for use up to 800 rpm. When the brush starts losing its effectiveness, the user can switch the cordless or pneumatic drill to reverse for extended brush life.

Get Info Now