Reversible gear pullers

Reversible gear pullers

Reversible gear pullers Product Image

Balkamp's two reversible gear pullers may be utilized in both two- and three-jaw applications. Both models feature reversible forged arms for internal pulling applications. Pressure-bearing yoke cap holds jaws in place for ease of setup.

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

TH513 Delphi Jumper Wire and Circuit Replacement Kit

Product From Thexton Manufacturing Company, Inc.

The Thexton TH513 Delphi Jumper Wire and Circuit Replacement Kit is designed to test and replace defective Delphi terminals. This kit includes all of the necessary jumper wires, test leads, terminals, butt splices, terminal release tools and heat shrink to repair most damaged Delphi circuits. If a terminal is deemed defective simply remove the terminal using the correct terminal release tool provided in the kit, cut the defective wire off and splice in a new wire using the parts provided in the kit.

Get Info Now

ATEC Cordless Under Hood Work Light No. 12-1017

Product From Associated Equipment

The Associated Equipment 12-1017 ATEC Cordless 6x1 Super Bright SMD LED Light offers the first cordless, rechargeable underhood worklight for the professional technician, says the company.  The 360-degree ratcheting aluminum alloy padded handles/hooks extend from 47" to 75", easily attaching to most vehicle hoods or be used as a standalone under vehicle worklight.  The light provides 400-500 lumens of bright light for up to three three hours of continuous run-time.  Featuring a 7.4V 2200mAh Li-ion rechargeable battery, this worklight allows users the flexibility to use in a situation where no AC power is readily available or where mobility is key for efficient service. OE automotive manufacturer tested and approved.

Get Info Now

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Wire Loom Threading Kit, No. 4462

Product From OTC, Bosch Automotive Service Solutions

The OTC Wire Loom Threading Kit, No. 4462, saves time and hassle when servicing or adding electronic components to a vehicle. It allows new wire to be threaded into existing looms without cutting tape or zip ties,

Get Info Now

Drain Plug PRO Kit No. 5961

Product From OTC, Bosch Automotive Service Solutions

The OTC Drain Plug PRO Kit, No. 5961, eliminates the issue of dropped drain plugs with a magnetic head, several adapters for common makes/models usage and a flexible cable allowing the drain plug to fall away from the oil stream, reducing splashing. The kit builds on an original, patented innovation by broadening the application to all automotive drain plug designs. 

Get Info Now

Ford Spark Plug Removal Kit, No. 6918

Product From OTC, Bosch Automotive Service Solutions

The OTC Ford Spark Plug Removal Kit, No. 6918, helps eliminate plug breakage upon removal, speeding up the process of removing and replacing plugs for notoriously difficult-to-remove Ford three-valve engines that features a two-piece spark plug design. It locks the plug porcelain core to the protruding

Get Info Now

Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130

Product From Lisle Corporation

The Lisle Corp. Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130, are designed to remove and replace the main filter collar as well as the vent cap on aftermarket diesel fuel filter systems. The unique half-moon design provides easier access to the fuel filter, according to the company. High-strength steel prevents the wrench from flexing while loosening filter collars, four teeth grab the vent cap securely to prevent damage and a thick, padded grip cushions users hands. The 61090 wrench fits 5" Davco 242/243 aftermarket fuel filter systems, the 61110 fits 6" Davco 382 aftermarket fuel filter systems and the 61130 fits 8" Davco 482 aftermarket fuel filter systems. 

Get Info Now