Tite-Reach wrench accessory

Tite-Reach wrench accessory

Tite-Reach wrench accessory Product Image

The TR Tools Tite-Reach wrench accessory helps in accessing hard-to-reach spots for loosening or tightening fasteners. Used in conjunction with a 3/8"-drive wrench set or impact wrench (maximum 400 lbs.), its patented design extends out from the nut/bolt giving the drive a greater degree of arc, allowing the user to finish the job in less time.

Expand for more details on this Product

Clip-On Magnetic Parts Dish

Product From V8 Tools Inc.

The V8 Tools Clip-on Magnetic Parts Dish, No. V8 3803, saves technicians time by helping to prevent the loss of missing e-clips, bolts or drain plugs. To use, technicians must clip the V8 3803 anywhere onto themselves as a holster for parts or small hand tools. Three powerful, rare-earth magnets hold the dish securely. This dish is specially designed to hold long parts and tools. It is made of a strong and durable plastic. 

Get Info Now

NitroPRO NTO-200 Nitrogen Tire Top-Off System

Product From Mahle RTI

RTI Technologies' NitroPRO NTO-200 Nitrogen Tire Top-Off System was developed to provide a lightweight, portable and cost-effective tool for nitrogen tire top-off service and individual tire conversions. It can be used for nitrogen inflation of smaller pneumatic tires like bicycle, motorcycle and lawn and garden implement tires.Features:

Get Info Now

Mini-Ductor II Flameless Heat System

Product From Induction Innovations

The Induction Innovations Mini-Ductor II 110V, 15-amp handheld flameless heat system instantly heats and removes seized nuts, bearings, pulleys and other metal or mechanical hardware and parts without the danger of an open flame or potential damage to nearby plastics using Invisible Heat. Also great for hail dent removal, this tool can now handle a vast array of applications with the flexible Bearing Buddy Coil, the Long Coil Kit and even debadge, remove emblems and stripping with the Mini-Pad. The basic kit now comes in a new custom blow-molded, impact-resistant case with storage to hold accessories.

Get Info Now

Megatester

Product From Megatester Inc.

The Megatester Multi-Tester is a super bright LED flashlight with a built in electrical tester that can outshine most "D" flashlights, according to the company. It is compact enough to carry all the time and can test almost all un-energized circuits 3V to 220V AC+DC circuits. Megatester can also trace wires and find bad grounds. This unit comes with two holsters: one velcro holster and one belt holster, for convenient access to flashlight and tester at all times. This unit comes with a push-button switch and How-To-Test guide, which explains how to perform basic safe testing. Megatester is made to the highest quality standards, backed by the company's unconditional lifetime guarantee.

Get Info Now

Pocket LED Light Stick, No. PCLED6

Product From E-Z Red Company

E-Z Red's Pocket LED Light Stick, No. PCLED6, features six bright high-power LEDs and produces floodlight or directional light, providing 36 lumens and up to 11 hours of runtime. Use the PCLED6 to illuminate hard-to-reach, tight areas. The Light Stick takes three AAA batteries, is water-resistant and has a molded clip to stay in the pocket, and a magnetic base. 

Get Info Now

Wrench Connection Set, Nos. WC100 and WC200

Product From E-Z Red Company

The E-Z Red Wrench Connection set connects almost any 6-point or 12-point tool to another, making the possible angle and leverage combinations almost limitless. Molded-in magnets assure hold, allowing these tools to connect any wrenches to each other no matter how long, short  or offset they may be. Also connect socket to wrenches with or without the use of extensions, or no matter how deep or shallow sockets may be. Two sizes available: No. WC100 low-profile metric Hex set includes sizes 8mm-19mm; No. WC200 low-profile SAE hex set includes sizes 1/4” to 13/16”.

Get Info Now

Flange Lever, No. 20037

Product From Steck Manufacturing

Steck Manufacturing's Flange Lever, No. 20037, quickly accesses hard-to-reach damaged frame flanges, door and hood edges and radiator supports to bring back to proper edge alignment. Double-ended reverse 1/4" hook design is made from hardened alloy steel. The flat hook allows for easy manual alignment; the 35-degree angle bar allows access areas like radiator supports.

Get Info Now

Blair Flanger

Product From Blair Equipment Company

The Blair Flanger quickly produces steps joints for panel repair and welding. Repairs can be made faster because there is no need to remove the panel from the vehicle and there is no distoration of the material. The Flanger is lightweight and has a 7" cam action that quickly springs back open for positioning of the next step. Made in USA.

Get Info Now

High Speed flaring tool kits

Product From BrakeQuip LLC

BrakeQuip offers a professional kit (No. BQ350), standard flaring tool kit (No. BQ351), a 37 degree only kit (No. BQ352) and a 37 degree kit for anyone who has a Sykes Pickavant 270 series flaring tool kit (No. BQ352-SP). The professional kit (BQ350) creates 37- and 45-degree single and double flares as well as DIN.

Get Info Now

Kukko 3-Arm Quick Adjusting Universal Pullers

Product From Anglo American Tools

The Anglo American Tools Kukko 3-Arm Quick Adjusting Universal Pullers were diligently and cleverly designed to contain features such as the use of “ArmLock” technology, which guarantees maximum stability of the sliding arm and the claw. The geometry of the puller’s crossbar and sliding parts has been optimized (rounded) to ensure particularly easy movement of the extractor hooks along the crossbar, while offering a rock-solid hold once positioned on the bolts. The knurled-knob adjusters enable quick loosening, positioning and tightening of the puller arms by hand, requiring no wrench.

Get Info Now