Haweka's QuickPlate System replaces traditional "finger or flange plates" with planetary gears which rotate the built-in studs to center on the wheel. With a simple twist, the QuickPlate System matches the wheel lug-hole pattern of any passenger car, SUV or light truck. Haweka QuickPlates coupled with the Haweka Duo Collets creates a mounting solution to properly balance every wheel with repeatable results.
From Haweka USA Inc.
- Product From Lisle Corporation
The Lisle Wheel Stud Pilot Pin Set, No. 13950, makes it easier to remove and install wheels on many European vehicles with lug bolts. Three pairs of metric threaded wheel stud pilot pins allow users to hang the wheel without having to balance the wheel on the small lip of the hub. This helps prevent the wheel from falling and causing damage or injury. Users can simply insert the proper size threaded pins into hub bolt holes to hold the wheel in place while inserting or removing lugs. This set includes 12mm by 1.5mm, 14mm by 1.25mm and 14mm by 1.5mm threaded pins, which are also available individually.
- Product From Ken-Tool
The Ken-Tool Blue Cobra Truck Tire Service Set, No. 35442, features the company's Blue Cobra Truck Tire Demount Tool (No. 35440) and includes six other needed components to service most 22.5" and 24.5" truck tires quickly and easily. This set also includes the T45C Classic Tubeless Tire Iron, No. PN 34645C; Double-End Tire Spoon, No. PN 33050; Euro Lube Paste – 8 lb. Pail, No. PN 35848; Euro-style Lube Applicator Brush, No. PN 30512; two aluminum C-Loc Bead Holders, No. PN 31713; and Leather Rim Protector, No. PN 31810. The service set is packaged in a single, 40-lb box.
- Product From Tru Align LLC
The Tru Align Direct Mount Hub Adapter is a product add-on used to eliminate the need for alignment clamps during wheel alignments. This adapter is perfectly centered and easily attaches to the updated Tru Align Plate. The expandable sleeve allows for any manufacturer’s alignment heads to directly mount on the Tru Align Plate. By attaching directly to the vehicle’s hub, Tru Align eliminates the alignment inaccuracies and clamp attachment difficulties of both the “quick clamp” and “traditional” alignment systems.
- Product From Myers Tire Supply Co.
Myers Tire Supply offer the Sens.it (Sensor Intelligent Technology) Programmable TPMS Sensor, a web-based system that identifies individual TPMS specifications and programs a new sensor in less than a minute. Users enter the VIN and faulty sensor serial number into the program on their PC. The vehicle-specific sensor data is downloaded and embedded in the Sens.it sensor, then ready to install. Sens.it covers all 315Mhz versions for Ford, GM, Chrysler, Toyota, Nissan and Honda and is compatible with all TPMS tools.
- Product From Dent Fix Equipment
Re-create fender curve lines perfectly every time with the DF-BL10 Body Line Marker Tool from Dent Fix. The Body Line Tool makes accurate measurements around wheel opening moldings quickly and easily. Using the same method a compass uses to draw exact circles or arcs from a single point, this tool draws a line equal distance from any part of the fenders edge.
- Product From Acme Automotive
Acme Automotive offers the GilaFlex inner-braided PVC air hose with a special blend of PVC that has no memory, so hose will lay flat on the ground. With a 180-degree bend radius, the hose will not kink and cut off air supply. A steel spring strain relief protects the hose at its weakest point, near the fitting, without inhibiting maneuverability. The smooth outer cover doesn't trap dirt and is easy to clean. The GilaFlex has a temperature range of -40 degrees F to 150 degrees F, and a working pressure of 325 psi at 70 degrees F.
- Product From Hennessy Industries Inc.
The COATSLeverless Power Duckhead Bead Lifter, from Hennessy Industries, is a mount/demount system that retrofits the COATS APX, 9024 and 70X series tire changers. The bead lifter’s leverless design eliminates traditional tire tools that can mar the tire’s surface. During demounting, the leverless tool hooks the lip of the bead and effortlessly lifts it just above the rim. The tire then comes off the rim with a simple rotation of the tabletop. The leverless tool can also be utilized as an additional helper device when mounting a tire’s top bead.
- Product From Josam Products, Inc.
Josam Products' Play Detectors are used on all axles to locate worn or loose components prior to alignment or during safety inspections. They simulate turning, braking and acceleration forces on the steering, suspension and chassis. The Play Detectors check king-pins, torque-rods, spring-eyes, u-bolts, shackles and all the other parts that locate the axles to the frame. A control unit provides control of the travel, direction and frequency of the individual plates.
- Product From Tire Service Equipment Manufacturing Co. - TSI
TSI's Cheetah Stud Extractor Kit, No. 6300, can drill a hole precisely in the center of a broken axle stud and eliminates damage or the need to re-tap broken axle stud holes damaged by other removal methods. Kit components cover the eight most popular truck axle hubs, and includes a wooden storage case.
- Product From Plews/Edelmann
Tru-Flate provides tire gauges, blow guns, tire hardware, chucks, couplers, plugs, regulators, tire repair and tire hardware.