Wire Terminal Extractors, Nos. 9025 and 9024

Wire Terminal Extractors, Nos. 9025 and 9024

Wire Terminal Extractors, Nos. 9025 and 9024 Product Image

The Sir Tools' Wire Terminal Extractors come equipped with factory-correct extractor press barbs, which mate up to DC wire terminals throughout the vehicle, allowing for easy wire terminal release from their respective harness or connector. Two kits available: 12-Barbed Kit, No. ST 9025; and the 6-Barbed Kit, No. ST 9024. The two tools combined offer the techs 18 different press barbs.

Expand for more details on this Product

CrimPro 4-in-1 Angled Wire Tool, No. 5950A

Product From OTC, Bosch Automotive Service Solutions

The OTC CrimPro 4-in-1 Angled Wire Tool, No. 5950A, combines four separate tools into one convenient configuration for common wire repairs technicians experience every day. Simplify wire repair in hard-to-reach places with the ability to pull or twist wires, cut, strip or crimp from any angle. When wire service is compromised by limited access,

Get Info Now

Wire Loom Threading Kit, No. 4462

Product From OTC, Bosch Automotive Service Solutions

The OTC Wire Loom Threading Kit, No. 4462, saves time and hassle when servicing or adding electronic components to a vehicle. It allows new wire to be threaded into existing looms without cutting tape or zip ties,

Get Info Now

Rennsteig Double-Edged Bolt and Screw Extractors

Product From KNIPEX Tools LP

The Rennsteig double-edged bolt and screw extractors, distributed by KNIPEX Tools LP,  represent a new generation of tools to easily remove damaged screws and bolts.  With the German quality, reusable double-edged bolt extractors that make eight points of contact and can be used for both left- and right-handed threads, users can get back to work in five easy steps. 

Get Info Now

Broken Spark Plug Remover for Ford Triton 3 Valve Engines, No. LIS65600

Product From Lisle Corporation

Lisle's Broken Spark Plug Remover for Ford Triton 3 Valve Engines, No. LIS65600, comes as a set of extractors that remove broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines. The p

Get Info Now

Megatester

Product From Megatester Inc.

The Megatester Multi-Tester is a super bright LED flashlight with a built in electrical tester that can outshine most "D" flashlights, according to the company. It is compact enough to carry all the time and can test almost all un-energized circuits 3V to 220V AC+DC circuits. Megatester can also trace wires and find bad grounds. This unit comes with two holsters: one velcro holster and one belt holster, for convenient access to flashlight and tester at all times. This unit comes with a push-button switch and How-To-Test guide, which explains how to perform basic safe testing. Megatester is made to the highest quality standards, backed by the company's unconditional lifetime guarantee.

Get Info Now

35-Pc. Master Extractor Set, No. 35LHDES

Product From Mac Tools

The Mac Tools' 35-Pc. Master Extractor Set, No. 35LHDES, contains 35 different screw extractors for use with a drill. The kit includes 1/8" to 1/2" screw extractors, 5/64" to 1/2" left hand cobalt drill bits and six spiral flute extractors.

Get Info Now

Double-edged bolt and screw extractors, No. 9R 471 901 3

Product From KNIPEX Tools LP

Knipex's double-edged bolt and screw extractors, No. 9R 471 901 3, can remove damaged screws, studs and bolts and is servicable for years of use. Removes damaged screws and bolts without damaging the threads on both right and left handed thread applications. Non-slip and double-edged engagement removes even the toughest frozen bolts. The tool has four double-edged cutting / gripping edges. Simply drill the right sized hole into the frozen bolt, hammer in the extractor, and turn it out with a wrench or ratchet. Made in Germany.

Get Info Now

4-piece Stripped Screw Extractor Set No. 62110

Product From Lisle Corporation

The Lisle Corp. 4-pc Stripped Screw Extractor Set, No. 62110, includes six lobed spiral bits which are designed to remove rounded or stripped fasteners with internal drive heads. Four sizes of extractors fit Torx and Torx Plus sizes T-40 to T-55; internal hex sizes 1/4" to 1/2" and 6mm to 13mm. This set will also work on other stripped or rounded internal drive screw heads. Made of heat-treated alloy steel for durability.

Get Info Now

Schroder 11-pc Extractor and Tap Wrench Set

Product From Anglo American Tools

The Anglo American Tools Schroder 11-pc Extractor and Tap Wrench combination set ideal for screw extraction, turning taps and rethreading. This set includes two three-position T-Handle ratcheting tap wrenches (one with Gripps Jaw design for square and hex drive tools), a 7" tap extension, two replacement chucks, three 3/16" square shank taps, and three Hi-Trac screw extractors. Tap wrench capacities 0 to 1/4.

Get Info Now

Rennsteig 5-pc Dual Edge Screw Extractor Set

Product From Anglo American Tools

The tools in the Anglo American Tools Rennsteig 5-pc Dual Edge Screw Extractor Set unscrew ruined screws and bolts without damaging threads. This unique design allows both left- and right-handed turning. Comes with an integrated center punch pin for precision work. The extractor is driven into the bore hole for a safe and secure hold, and offers double-edged engagement with the screw for a non-slip grip. Constructed of hardened chrome vanadium steel construction for longer tool life. Made in Germany.

Get Info Now