ASI 8000 Axle Seal Extractor Kit

ASI 8000 Axle Seal Extractor Kit

ASI 8000 Axle Seal Extractor Kit Product Image

Mills Machining's ASI 8000 Axle Seal Extractor Kit was designed for the general repair shop, to make removing axle seals quick and easy. The design consists of a slide hammer with a T-handle nearly 24" long for reaching beyond suspension components. The kit includes three tapered seal adapters, precision machined to thread into the seal and hold it securely for easy removal. Fits Chrysler, Ford and GM front wheel drive transmissions and some manual transmissions.

Expand for more details on this Product

Universal Seal Puller Kit No. 850

Product From Lang Tools

The unique design of the Lang Tools Universal Seal Puller Kit, No. 850, allows the user to have various angles and leverage points to engage and remove a seal. The jaw width will engage a larger surface area than the competition, says the company, 

Get Info Now

Space Saver Alignment Runway Systems

Product From Bee Line

Bee Line designed the Space Saver Ramp to be installed in a smaller area than a standard ramp alignment system by reducing the total number of machine sections required. The design of the Space Saver allows a major portion of the ramp to be raised hydraulically to an operating level equal to the height of the Advanced Aligner Runways.  The longer design of the Space Saver lifting ramp creates a more gradual incline, therefore requiring less runway sections. Once the truck is in position, the runways are hydraulically lifted with the touch of a button. The approach ramp incline angle allows low profile buses and RVs to drive on without bottoming out.

Get Info Now

3-Piece Seal and O-Ring Puller Set, No. SRP3PC

Product From Matco Tools

Matco Tools' 3-Piece Seal and O-Ring Puller Set, No. SRP3PC, quickly and easily removes O-rings, grease and oil seals. A special angle on the tool head provides better access than the traditional seal pullers. This set offers three different lengths and tips to fit nearly all seal applications. Sizes include: 4.6" 6" and 6.5" pullers.

Get Info Now

Universal seal installer, No. 17630

Product From Lisle Corporation

Lisle's universal seal installer, No. 17630, allows the user to install many sizes of seals. Features a long handle that provides extra reach when installing pinion seals and has flexible arms for the spider to keep the seal centered during installation. Includes two driver and spider sizes along with long and short handles. The user chooses the driver and spider that best fits the seal to be installed. Place the seal onto the spider. The spider will hold the seal in place and keep it centered while driving the seal. Made in the United States.

Get Info Now

EZ-Driver No. 29920

Product From Mayhew Tools

The Mayhew Tools EZ-Driver, No. 29920, allows techs to install bearings, bushings, gears and seals quickly, without the risk of damage. The EZ-Driver is a unique and highly configural tool set for installing bearings and other components onto or over a shaft. This 33-piece set offers two different styles of force distributors, which are used to apply pressure/force to the correct area of the bearing to eliminate damage of races, cones or cages. Technicians can create over 200 different set-ups to use on hundreds of makes and models of vehicles. The EZ-Driver also installs gears, sleeves, hubs, seals, sycro assemblies, suspension bushings, sprockets and pulleys onto a shaft. Made in the U.S.A. 

Get Info Now

Rapid Tire Deflators with TPMS Location Marks No. 401

Product From Lang Tools

Lang Tools introduces the Rapid Tire Deflators with TPMS Location Marks, No. 401. The cut-out on the side of the socket allows for quick and easy deflation of tires. The back side of socket has a recess so when the tire is re-inflated, the socket can go on the cap to retain the TPMS location. Sockets are marked with TPMS locations (Right Front – RF, Left Front – LF, Right Rear – RR, Left Rear – LR). Bright anodizing makes sockets easily visible on most tires and rims. Patent pending. Made in USA.

Get Info Now

Hub Grappler Kit, No. 6575

Product From OTC, Bosch Automotive Service Solutions

The OTC Hub Grappler Kit, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This kit eliminates unnecessary alignments or the use of a shop press. The tools, along with the manual, provide the capability to remove the hub and the bearing, and replace both on domestic, Asian and European vehicles. It applies to cars, trucks, vans and SUVs that have replaceable wheel bearings and can be used on either front-wheel or rear-wheel drive applications.

Get Info Now

Excentric Turn Chuck

Product From Mueller-Kueps LP

The Excentric Turn Chuck from Mueller-Kueps has a unilateral opening that allows universal usage for wheel alignment as well as easy ball-joint and inner-tie-rod replacement. Features:

  • Maximum grip on hardened surfaces.
Get Info Now

Wheel Washers

Product From Martins Industries

Martins Industries now offers Wheel Washers, available in three models. The models MWW-450 and MWW-550 are ideal for garages, tire shops and dealerships. The MWW-750 model is fully automatic, loading and reloading wheels that are brought on carts. It is the ideal model for larger volumes of wheels for companies such as tire warehouses, hotels and tire distributors. This machine does not need to be connected to a water source to work, making it possible to place the wheel washer at the most suitable place in the workspace.

Get Info Now

Universal Hub Puller HD with Plate No. 6574

Product From OTC, Bosch Automotive Service Solutions

The SPX Brand OTC Universal Hub Puller HD with Plate, No. 6574, aids technicians servicing wheel hubs, axle shafts and other tough pulling applications. This rugged hub puller is well suited for pushing the drive axle out of the wheel hub center, or pulling the hub off of the drive axle. OTC's new Universal Hub Puller delivers up to 20 tons of pressing power. Forged puller assembly coupled with a 1" drive screw applies large force without damaging components. Approved for use with an impact gun and can be struck with a hammer. 

Get Info Now