Gas Torch No. HP820

Gas Torch No. HP820

Gas Torch No. HP820 Product Image

With 2,797 BTU/h flame power (820 watts equivalent), and a welded stainless steel head, Portasol's No. HP820 Micro Torch features adjustable flame length of up to 4-1/2" and a 45-min. runtime at mid setting. Features:

  • All-in-one on/off Piezo ignition, safety button and stand.
  • 10-second refill time
  • Temperature up to 2,462 degrees F
  • Weighs 7 oz.

Expand for more details on this Product

Snap-on 'Muscle Mig' Wire Feed Welder, MM140SL

Product From Snap-on Inc.

The Snap-on 'Muscle Mig" Wire Feed welder welds up to 1/4" in a single pass and is used in body collision repair, automotive repair, maintenance, manufacturing applications and custom fabrication shops where voltage input is limited to 120V. It includes a cylinder rack, MIG torch with 10' cable and 20' power input cable. It comes with a 2-year warranty, except for the MIG torch and consumables

Get Info Now

Utility socks

Product From KEEN Utility

Keen's utility socks are built left foot- and right foot-specific for optimal fit with a three-layer impact cushioning system in the heel, metatarsal and toe areas. For additional cushioning these socks are extra durable knit in high stress areas and include a seamless toe as well as arch support to stop bunching. Available in various colors in men's M-L-XL and women's S-M-L. 

Get Info Now

6-pc. Air File Set, No. AF-3406

Product From Genius Tools USA, Inc.

Genius Tools now offers a 6-pc. Air file set, No. AF-3406. This set includes an air file wrench with a free speed of 3,400 rpm and 90 psi air pressure. This set also comes with five files: flat, round, half-round, square and triangle.         

Get Info Now

TriGage Combo Tool

Product From Murray Corporation

Murray Tools' TriGage Combo Tool measures bolt diameter, thread pitch and bolt grade to ensure that when you are replacing bolts or studs, you select the correct size. It also helps to select the correct size split thread repair die when repairing exterior threads.

Get Info Now

Victor 400 Series oxy-fuel torch

Product From Victor Technologies Group, Inc.

The Victor 400 Series oxy-fuel torch from Victor Technologies offers better ergonomics, a clearer view of the cutting path and visual cues for easier use and enhanced safety. The tool features a two-piece torch design. The patented contoured handle has size and shape that fits naturally in most operators' hands and a textured grip. To simplify use it has color-coded and labeled the oxygen and fuel valves for instant identification and easier operation. The tube design optimizes cutting area visibility while providing strength and supporting gas flow rate requirements for tip sizes 000 through 6. 

Get Info Now

Heavy Duty Form-A-Funnel

Product From New Pig Corporation

New Pig introduces the Heavy Duty Form-A-Funnel Draining Tool — a flexible tool for guiding oil from large vehicles and heavy equipment into oil drains for easy, no-mess oil changes. Edges can be molded around large filters and drains to create a leakproof seal. At 22” long by 8.625” wide, the Form-A-Funnel is constructed of a moldable aluminum alloy core encapsulated in thick and pliable nitrile rubber. This tool bends easily to fit tight spaces, holds any shape and is unaffected by temperatures up to 425 degrees.

Get Info Now

Relay Buddy Automotive Relay Tester, No. 190

Product From Electronic Specialties, Inc.

Electronic Specialties introduces the No. 190 Relay Buddy Automotive Relay Tester to provide an indication of the general health and function for most common 4/5 pin automotive relays. Relay Buddy cycles the relay several times while loading the contacts to detect any excessive resistance, and watches for consistency in every test cycle. Uses the vehicle's 12V battery as a power source. Test results displayed with a green light mean the relay is good; a red light means the relay is bad.

Get Info Now

Hub Bearing Removers, Nos. 69610 and 69630

Product From SP Tools/Schley Products Inc.

The SP Tools' Hub Bearing Removers were designed to remove the hub bearings that are rusted to the steering knuckle, without removing the steering knuckle from the vehicle or the CV axle assembly. When utilized properly, this tool also does not require the use of a press. Two sizes available. The 12 mm (No. 69610) works on many Chrysler, GM, Ford, Mazda, Saturn, Volvo, Isuzu, Saab and other vehicles with 12 mm X 1.75 thread. The 14 mm (No. 69630) works on many Chrysler, GM, Ford, Honda, Nissan, Infinity, VW, Audi, Mazda, Volvo, Mitsubishi, Kia, Hummer and other vehicles with 14 mm X 1.5 tread.

Get Info Now

Hub Grappler Kit, No. 6575

Product From OTC, Bosch Automotive Service Solutions

The OTC Hub Grappler Kit, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This kit eliminates unnecessary alignments or the use of a shop press. The tools, along with the manual, provide the capability to remove the hub and the bearing, and replace both on domestic, Asian and European vehicles. It applies to cars, trucks, vans and SUVs that have replaceable wheel bearings and can be used on either front-wheel or rear-wheel drive applications.

Get Info Now

PliersRack tool organizer

Product From Plyworx

The Plyworx PliersRack helps technicians organize the pliers in a toolbox drawer. This organizer is 30" long and holds 32 pliers in a drawer that is only 2-1/2" deep. By placing the rack at the rear of the drawer, pliers will stay in place when the drawer is shut. Users may also place the rack along the side of the drawer. The rack has 10 extra-wide spaces for insulated handles, is made of 3mm steel wire and coated with vinyl to last a lifetime.

Get Info Now