Thread identification kit

Thread identification kit

Thread identification kit Product Image

BrakeQuip's thread identification kit was designed to instantly identify 16 different threads in automotive plumbing. Additional features of this kit include:

  • Identifies both male and female threads.
  • Incorporates both male and female go/no-go gauges.
  • Includes both metric and imperial.
  • Can be used in plug fluid ports.
  • Color-coded in groups for fast selection.

Expand for more details on this Product

Alcoa Fastening Systems Fix-A-Thread Repair Kit

Product From Alcoa Fastening Systems

Alcoa Fastening Systems' Fix-A-Thred Repair Kit features inserts, tap, instructions and a three-way installation tool. This tool rethreads the hole, installs the insert, and breaks the tang. Fix-A-Thred Repair Kits are available in a wide range of sizes for both Unified Inch Coarse (UNC) and Unified Inch Fine (UNF). Kits are available in 33 of the most popular sizes from #8 through 1 1/2” UNF. Metric repair kits are available for coarse and fine threads from M.3-.5 to M.20-2.5. 

Get Info Now

Nes Internal Thread Repair Tools

Product From Anglo American Tools

The Nes Internal Thread Repair Tools, from Anglo American Tools, is a one-hand tool that restores inch or metric, RH or LH fastener threads. Self-adjusting to any pitch and size within range, there's no need for calibration or identifying fastener thread type when using this tool. Automatically chases good thread sections to repair the damaged parts and features hardened cutting blades (HSS). Cutters can remove some burrs. 

Get Info Now

Nes3 External Thread Repair Tool

Product From Anglo American Tools

The Anglo American Tools Nes3 External Thread Repair Tool restores inch or metric, right-hand or left-hand fastener threads. Theses floating cutters are self-adjusting to any pitch and size within range with no need for calibration or identifying fastener thread type. Automatically chases good thread sections to repair the damaged parts. Comes with hardened cutting blades (HSS) and opens up to 6".

Get Info Now

Pop Nut Blind Rivet PNT110 Manual Tool

Product From Emhart Teknologies

Emhart Teknologies expanded their line of Pop Nut Blind Rivet Nuts and Tools with the addition of two new Tool Kits: the PNT110 Manual Tool in standard and metric sizes. Both kits include a 190-piece variety of threaded inserts. The PNT110 Inch kit contains mandrels and nosepieces for 6-32, 8-32, 10-24, 10-32 and 1/4-20 size inserts. The PNT110 Metric kit contains mandrels and nosepieces of the following sizes: M3, M4, M5 and M6.

Get Info Now

Powerbuilt Tools Back-Tap Tool

Product From Alltrade Tools

The Powerbuilt Tools Back-Tap tool from Alltrade Tools offers a patented collapsible design allowing users to place the tool through the spark plug hole and into the combustion chamber. A mandrel is then drawn back, expanding the tool's threaded area and threading into the clean threads at the bottom of the spark plug hole. The Back-Tap repairs the damaged threads as it is drawn up through the spark plug hole, bringing debris and metal filings with it.

Get Info Now

Bust-N-Out 3-Step Bolt Removal System

Product From Matco Tools

Matco Tools introduces an exclusive Bust-N-Out 3-Step Bolt Removal System, Nos. ZBEC5, ZBCD5 and ZBDR4. All three items are required to properly remove broken bolts or studs without damaging the original threads. These kits feature specialty-end cutting carbide burrs to be used in succession to Step 1 of the Bust-N-Out system, to properly locate a broken bolt center point. The kit prepares broken bolt surfaces for final drilling in the center of a broken bolt. The existing bolt hole provides a guide for burrs correct alignment to broken surface. Made for use with high-speed right angle grinders.

Get Info Now

78065 PWM Power Pro

Product From Hickok/Waekon

The Hickok/Waekon PWM Power Pro supplies, measures and displays variable current providing enhanced diagnostics for components and their related wiring harness. Current is supplied to DC and PWM components being tested using Pulse Width Modulation, allowing the current output percentage to be manually adjusted from 0 to 100 percent, in one-percent increments. This tool delivers 0-40 amps and displays actual current draw. This kit includes the main unit with 7' cable, two 3' 40 test leads, two battery clips, two alligator clips, two female spade probes and one male spade probe.

Get Info Now

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Wire Insertion Tool Set, No. 61030

Product From Lisle Corporation

The Lisle Wire Insertion Tool Set, No. 61030, includes the 1/4" O.D. and 3/8" O.D. wire insertion tools for installing or repairing audio equipment, aftermarket lighting, alarm systems and much more. With a sharp point on the end and palm-size handle, these tools provide extra leverage to pierce through firewalls, rubber grommets and panels. The 10-1/2" steel tube provides easy access to feed wires through the firewall. These tools are also available individually.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now