Camair 3-Stage Filtration System

Camair 3-Stage Filtration System

Camair 3-Stage Filtration System Product Image

With ultra-low pressure drop, the CamAir 3-Stage Filtration System from DeVilbiss is highly efficient, producing clean, oil-free and particulate-free air for paint shops converting to waterborne base coats. The system features a first stage water trap and dirt filter, a second stage sub-micron oil coalescer and a third stage charcoal adsorber. Meeting Type 1-Grade D breathable air particulate requirements, the system has two self-relieving regulators.

Expand for more details on this Product

Personal Air Breathing Unit, No. P-20

Product From Martech Services Co.

The Martech Services Co. Personal Air Breathing Unit, No. P-20, provides Grade D breathable air for a proper NIOSH-approved respirator, and with the provided 54" tool air hose assembly, it allows air bypass for a paint spray gun. 

Get Info Now

Spray Gun Holder

Product From Morgan Manufacturing, Inc.

Morgan Manufacturing's Spray Gun Holder magnetically attaches to spray booth wall and will hold two full spray guns without sliding or tilting. Two support positions for gravity-fed spray guns, two support positions for siphon-fed spray guns and center notch in unit to hang the end of an air hose. Powdercoat finish.

Get Info Now

Work Stand Wheeler

Product From Steck Manufacturing

The Steck Manufacturing Work Stand Wheeler is a wheeled platform accessory for existing work stands, allowing technicians to easily move loaded work stands from repair to paint prep and paint booths. The Work Stand Wheeler’s 1-1/2'" wide by 36" long steel channel holds either round or square tube stand (X frame) work stands in seconds. This self up-righting channel allows the technician to either push or pull the loaded work stand. The Work Stand Wheeler can accommodate up to a 32" wide extended work stand and easily holds up to 500 lbs of components. 

Get Info Now

Breathable Air Combo System No. 50-WB

Product From Martech Services Co.

Martech Services Co. offers the Breathable Air Combo System Model No. 50-WB. The Model No. 50-WB complies with OSHA regulations for proper air supplied respiratory protection, and delivers Ultra Clean & Ultra Dry Air from a single system. It can process up to 50 SCFM of breathable air or 35 SCFM of Ultra Clean & Ultra Dry Air, or any combination within those parameters. The system can handle up to two painters at the same time. It is a 50 SCFM system, and is also available in an 80 SCFM system.

Get Info Now

Personal Air Breathing Unit Model No. P-20

Product From Martech Services Co.

Compliance with the OSHA requirement for Grade "D" Breathable Air can be accomplished with the use of the Personal Air Breathing Unit Model No. P-20, manufactured by Martech Services Company. When used properly, the unit will work with the existing filtered compressed air supply, providing air for a proper NIOSH-approved respirator, and with the provided 54" tool air hose assembly, it will allow for a bypass of air for a paint spray gun. The unit is a 20 scfm system, allowing for use with full hoods, equipped with vortex cooling tubes, and provides the breathable air required to protect painters, blasters, and welders. 

Get Info Now

The Solution Compressed Air System

Product From Martech Services Co.

Cleaning, drying and heating the atomizing from an existing compressed air source can be accomplished with The Solution by Martech Services Company. The four-stage filtration is outfitted with an automatic moisture discharger. Then the clean air is further filtered to remove moisture content for super dry air. A controller with digital outputs allows the user to set the temperature of the atomizing up to 165 degrees F. The Solution is shipped complete with a 3/8" ID x 35' spray air hose and works well with both waterborne and solvent based paint systems.

Get Info Now

CLEAN Anti-Static Wiper and Bumper Prep Pad

Product From DeVilbiss Automotive Refinishing

DeVilbiss CLEAN Anti-Static Wiper and Bumper Prep Pad are now fully available in the U.S. and Canada. DeVilbiss Clean works to minimize buffing and costly rework delivering results that are more effective, efficient and profitable. The Anti-Static Wiper is an OEM-approved dry wiper designed to eliminate paint defects caused by dirt and static imbalance. It is lint-free and can be used between numerous applications. The Bumper Prep Pad cleans, abrades and degreases new unprimed plastic parts and bumpers in one easy step. It greatly improves paint adhesion by providing a consistent scratch pattern.

Get Info Now

CoAgent No. CA01

Product From Herkules Equipment Corp.

Herkules now offers a coagulant that effectively coagulates waterborne paint within a spray gun cleaning solution so shops can reduce and easily dispose of paint waste. Herkules’ CoAgent, No. CA01, is in a powder form and needs only one 1 oz. scoop to 5 gallons of dirty waterborne cleaning solution for effective separation. CoAgent quickly coagulates waterborne paint so the paint waste can be captured in filters for proper waste disposal. Waterborne cleaning solutions can include water, distilled water and packaged products offered by the major paint brand companies. Available in a 4.4-lb. container, or in a 1-lb. sample size container.   

Get Info Now

Portable Vehicle Lift, No. K900P

Product From Herkules Equipment Corp.

The Herkules K900P Portable Vehicle Lift comes equipped with a hitch, handle and wheels, allowing a technician to easily move the lift wherever the lift is needed. The lift is ready to operate after an easy hook-up to an air line. The lift is safe to use inside paint booths, and removes the possibility of any contaminants ruining a paint job.  Raising the vehicle up to an ergonomically correct working height, the K900P Lift eliminates the need to bend over, kneel or squat to work on a vehicle. This lift offers a 6,000-lb. capacity, has a lowered height of 3.6” and a raised height of 29".

Get Info Now

Tornado II Portable Paint Shaker, No. 51000

Product From Blair Equipment Company

Blair Equipment's Tornado II Portable Paint Shaker, No. 51000, mixes paint utilizing three axis of motion: orbital, side-to-side, and up/down. This multi-motion blending completely mixes all types of paints from primers to metallics. The shaker spins an eccentric weight rather than using crankshafts, belts or pulleys which can wear and break. The lightweight portable design allows it to be used on a workbench or the floor.

Get Info Now