Geodyna Optima wheel balancer

Geodyna Optima wheel balancer

Geodyna Optima wheel balancer Product Image

With Hofmann's fully-automatic, total ride performance Geodyna Optima wheel balancer, techs clamp the wheel via the power clamp and closes the wheel guard. Optical technology inputs all wheel parameters, identifies wheel type, recommends tape or clip weights and counts spokes. Tape weight placement can be done via data set arm or laser pointer. Tire/Rim runout is measured by non touch technology for single "break and turn" matching.

Expand for more details on this Product

Wheel Balancer, No. WBE 4230

Product From Robert Bosch Corporation

The Bosch Wheel Balancer, No. WBE 4230, is designed to easily and quickly mount and balance tires. A high-performance mounting set, a quick mounting nut and an extended shaft are included for accurate and fast mounting. This wheel balancer provides the ability to handle light truck tires and a greater variety of wheels for a more precise balance. The machine also comes with the Bosch Wheel Service Promise to restore the machine to full operating condition within 48 hours of any repair appointment, or Bosch will extend the factory warranty.

Get Info Now

B-100 Wheel Balancer

Product From Dannmar Equipment

The Dannmar Equipment B-100 Wheel Balancer offers a quick-nut mounting system, a labeled graphic interface with a touch-display panel, a 38” front-to-back coverage wheel shroud, a multi-pocket wheel weight shelf with over 14 pockets, multi-mode balancing, a power-saving mode, automatic measurement and input of distance and diameter and a 140-rpm design. This wheel balancer has a 12” balancing shaft and can accommodate wheel diameters of 44” maximum. The approximate balancing time is five seconds and the precision is within 1 gram. This unit comes standard with SUV balancing modes, and is equipped with motorcycle wheel calibration modes.

Get Info Now

Passenger Vehicles Wheel Balancer, No. B80SE

Product From MAHA USA LLC

MAHA USA's Passenger Vehicles Wheel Balancer, No. B80SE, features a quick and accurate speed of operation that includes an automatic three parameter data entry, resulting in no chance for the user to enter incorrect data. In includes a s

Get Info Now

Motorized Wheel Balancer, No. EEWB304D

Product From Snap-on Inc.

Snap-on Motorized Wheel Balancer, No. EEWB304D, can be used on passenger cars, light trucks and light commercial vehicles. It includes two parameter automatic entry devices to measure rim offset and distance by touching the distance gauge to the rim without any other user input. It includes a molded weight tray that has 16 weight storage pockets, static mode for single-plane narrow wheels, dynamic mode for dual-plane balancing, five ALU-S modes provide multiple combinations of hammer and adhesive weight placements, Hidden Weight Mode for weight placement behind spokes and Fine Weight Toggle allows for extra light weight placement.

Get Info Now

DST64T wheel balancer

Product From Ranger Products

Ranger Products' DST64T wheel balancer comes equipped with revolutionary DataWand and an inner data set arm allowing operators to quickly and automatically enter wheel parameter settings in less than three seconds, for exact balancing every time. A soft-touch key pad and display panel includes dynamic, static and variable alloy settings and features dynamic tire and wheel graphics to help guide technicians through balancing procedures.

Get Info Now

Speedliner adhesive wheel weight tape

Product From Hofmann-USA

Hofmann Speedliner adhesive wheel weight tape features an even higher initial tack as well as the ability to remove the weight from the wheel rim without leaving any traces, according to the company, making balancing easy. The weights have a patented new type of adhesive strip with a five-layer structure. They have a special intermediate reinforcement film with exceptional tear-resistant properties ensuring strong cohesion within the adhesive strip. These weights can now be torn even more easily than before and leave a clean tearing edge when individual segments are separated off.

Get Info Now

K8 compact balancer

Product From BL Systems/CEMB, USA

CEMB's K8 compact balancer can be used in gas stations, small and medium size car automotive garages. It balances steel and light alloy wheels of cars, light trucks, motorcycles and scooters with optional adaptors. The balancer also features self-diagnosis and self-calibration, menus for quick selection of units of measurement, optimization program for compensation of rim and tire unbalance, programs for "static" balancing and the balancing of different types of rims, standard quick nut mounting, one button split and hidden weight program, and a 10-compartment weight tray.

Get Info Now

Corghi HD700 Tire Changer and ET66 Wheel Balancer

Product From Bee Line

Bee Line's Corghi HD700 Tire Changer and ET66 Wheel Balancer offers shops the ability to service the tires of an array of vehicles. The ET66 benefits from being user-friendly and capable of handling a max tire weight of 440 lbs. It has a spin time of just 17 seconds. The HD700 includes a ramp on the carriage with left-right movement, allowing technicians to easily maneuver tires onto the jaws. Tubeless or inner tube-type tires, as well as skid steer tires, can be slid on or off the rim quickly and effortlessly, with rim sizes from 14" to 26".

Get Info Now

DX Fluid Extractor Series

Product From Vacula Automotive, a division of CEJN Industrial Corporation

Vacula's DX Fluid Extractor Series extracts fluids from vehicle brakes quickly and safely via vacuum bleeding, and generates slight overpressure to empty the unit's fluid canister. The series features universal seals that enable the safe extraction of all kinds of nonflammable fluids, even aggressive-type brake fluids. The equipment is ready to use for brake bleeding, and comes equipped with PVC hose fitted with a universal adapter and a suction probe.

Get Info Now

Dual 80 Technology Ratchet

Product From Snap-on Inc.

Snap-on's ratchet with Dual 80 Technology has not only garnered awards for being one of the best new tools on the market, but it also has become a big hit with service technicians who realize that it is quite a unique product. The Snap-on Dual 80 Technology ratchet may look like other ratchets but it has an extremely fine-tooth gear with 80 teeth on a surprisingly compact head - just 1-13/16" wide and 1/2" deep.

Get Info Now