The Hatch Jammer, No. 17100, from Steck Manufacturing allows techs to hold a lift gate or hatch in a partially open position for sanding, painting or buffing. The tool will stabilize the hatch for easier prep and painting of the outer skin away from the bumper and improve the visibility of the panel for the technician. It has an adjustable 11 1/2" slide bar which gives up to 24" to adjust the angle.
Hatch Jammer No. 17100
From Steck Manufacturing
- Product From Megatester Inc.
The Megatester Multi-Tester is a super bright LED flashlight with a built in electrical tester that can outshine most "D" flashlights, according to the company. It is compact enough to carry all the time and can test almost all un-energized circuits 3V to 220V AC+DC circuits. Megatester can also trace wires and find bad grounds. This unit comes with two holsters: one velcro holster and one belt holster, for convenient access to flashlight and tester at all times. This unit comes with a push-button switch and How-To-Test guide, which explains how to perform basic safe testing. Megatester is made to the highest quality standards, backed by the company's unconditional lifetime guarantee.
- Product From Induction Innovations
The Induction Innovations INDUCTOR MAX is a professional-grade induction heating tool operating on convenient 120V, 20 amp electrical supply, outputting 2,000 watts of power with a one-year warranty.
Using high-frequency magnetic fields, users apply precise invisible heat to metals where normally would not or could not have before. This tool heats faster and safer than torches, and is more powerful than a heat gun. With Inductor attachments, this unit instantly heats ferrous metals without the risk of damaging nearby plastics or rubber.
- Product From E-Z Red Company
The E-Z Red Wrench Connection set connects almost any 6-point or 12-point tool to another, making the possible angle and leverage combinations almost limitless. Molded-in magnets assure hold, allowing these tools to connect any wrenches to each other no matter how long, short or offset they may be. Also connect socket to wrenches with or without the use of extensions, or no matter how deep or shallow sockets may be. Two sizes available: No. WC100 low-profile metric Hex set includes sizes 8mm-19mm; No. WC200 low-profile SAE hex set includes sizes 1/4” to 13/16”.
- Product From Steck Manufacturing
Steck Manufacturing's Flange Lever, No. 20037, quickly accesses hard-to-reach damaged frame flanges, door and hood edges and radiator supports to bring back to proper edge alignment. Double-ended reverse 1/4" hook design is made from hardened alloy steel. The flat hook allows for easy manual alignment; the 35-degree angle bar allows access areas like radiator supports.
- Product From Morgan Manufacturing, Inc.
Morgan Manufacturing's Spray Gun Holder magnetically attaches to spray booth wall and will hold two full spray guns without sliding or tilting. Two support positions for gravity-fed spray guns, two support positions for siphon-fed spray guns and center notch in unit to hang the end of an air hose. Powdercoat finish.
- Product From Delta Kits, Inc.
The EZ-350D Shop Pro Windshield Repair System from Delta Kits is designed for the serious technician who does a high volume of repairs in a shop environment. This double bridge system allows users to work on two repairs simultaneously and also includes everything needed to easily handle a simple chip repair to the more complex combination break and crack repairs. The EZ-350D Shop Pro system includes two new and exclusive B250 repair bridges with I-100 injectors, both of which carry Delta Kits Limited Lifetime Warranty. All Pro series systems come with the multi-functional Spring Hammer, a three-in-one tool that includes a probe, depth gauge for drilling, and spring loaded hammer used in crack repair.
- Product From Blair Equipment Company
The Blair Flanger quickly produces steps joints for panel repair and welding. Repairs can be made faster because there is no need to remove the panel from the vehicle and there is no distoration of the material. The Flanger is lightweight and has a 7" cam action that quickly springs back open for positioning of the next step. Made in USA.
- Product From BrakeQuip LLC
BrakeQuip offers a professional kit (No. BQ350), standard flaring tool kit (No. BQ351), a 37 degree only kit (No. BQ352) and a 37 degree kit for anyone who has a Sykes Pickavant 270 series flaring tool kit (No. BQ352-SP). The professional kit (BQ350) creates 37- and 45-degree single and double flares as well as DIN.
- Product From Porter-Ferguson/Lowell Corp.
Porter-Ferguson offers Speed-Midget 4-ton auto body repair sets, ranging from basic to comprehensive. Each Speed Midget set comes with either a remote control hand jack or an ultra-fast air/hydraulic jack. All attachments have an EZ-E-ON feature, and most sets are packaged in a steel carrying case. The sets include the 12-pc PF0010, the 23-pc PF0007 Push-Spread Set, the 29-pc PF0011 and the 32-pc PF0015 Set. Porter-Ferguson auto body sets carry a lifetime warranty against defects in material and workmanship.
- Product From Anglo American Tools
The Anglo American Tools Kukko 3-Arm Quick Adjusting Universal Pullers were diligently and cleverly designed to contain features such as the use of “ArmLock” technology, which guarantees maximum stability of the sliding arm and the claw. The geometry of the puller’s crossbar and sliding parts has been optimized (rounded) to ensure particularly easy movement of the extractor hooks along the crossbar, while offering a rock-solid hold once positioned on the bolts. The knurled-knob adjusters enable quick loosening, positioning and tightening of the puller arms by hand, requiring no wrench.