Spotgun Jr./UV-Phazer Kit

Spotgun Jr./UV-Phazer Kit

Spotgun Jr./UV-Phazer Kit Product Image

The UView Spotgun Jr./UV-Phazer Kit's capabilities start with the Spotgun injector that inputs a precise amount of dye into the A/C system, without overfilling. The Phazer's 18 UV LEDs then take over with a concentrated single beam of light for brighter dye illumination at leak points. Also included in the kit are two dye cartridges that translate to 10 applications, R-134a and R-12 system adapters, UV enhancing glasses, dye cleaner/remover and service stickers.

Expand for more details on this Product

MT1400 Compressor Electronic Control Valve Tester

Product From Santech Industries

The Santech Industries MT1400 Compressor Electronic Control Valve Tester can test electronic control valves in variable displacement compressors. The tester can be placed in-line between the compressor control valve and wiring harness connector, so control valve issues can be diagnosed before condemning the compressor. The electronic control valve regulates internal compressor pressure to change compressor displacement. The tester regulates the input signal to the control valve to verify the valve operation. A compressor with a low-pressure differential may simply have a defective or dirty electronic control valve or not be receiving the proper voltage signal to the control valve.

Get Info Now

"Inspector" 2 in 1 Electronic/UV Leak Detector, No. 55200

Product From Mastercool Inc.

Mastercool's "Inspector" 2 in 1 Electronic/UV Leak Detector, No. 55200, delivers an accurate and instantaneous leak detection. It includes an ultra-bright UV LED and an A/C "sniffer." The sniffer, which can detect leaks as small as 1/10 oz per year, features six levels of sensitivity for 15 levels of detection and a tri-colored visual leak level indicator. It meets SAE J1627 and CE Conformity and comes with UV enhancing "yellow" glasses.

Get Info Now

Thermistor Tester, No. MT3701

Product From Santech Industries

Santech Industries Thermistor Tester, No. MT3701, specifically tests thermistor and sun load sensor circuits. The tester can be placed in-line between the sensor and wiring harness connector. It operates on an ohm signal. The unit has an ECM mode which reads the signal and manual mode that can change input signals. This helps check if the sensor can have an effect in turning the A/C compressor off and on. In this way, the tool can verify if a sun load sensor needs to be replaced. The Kit includes one set of universal leads.

Get Info Now

UV Phazer Black, Nos. 413065 and 414075

Product From UView Ultraviolet Systems

UView's UV Phazer Black, Nos. 413065 and 414075, features a "True UV" LED blacklight that is 11 times more powerful at illuminating UV dyes than previous offerings. Available in rechargeable lithium-ion (No. 413065) and AAA battery (No. 414075) offerings, the flashlights benefit from the features of the Phazer Neo, but at an even better price. Includes adjustable lens focus, anodized aluminum housing and a 400 nm wavelength.

Get Info Now

Mist Cleaning Solution

Product From TerraClean

TerraClean's MiST Cleaning Solution effectively treats mold, mildew and bacteria in the HVAC system and cabin of a vehicle. Designed specifically for use with the MiST II Ultrasonic Cleaning Unit. Modern HVAC systems trap more moisture than older systems. These systems are ideal habitats for the growth of mold, mildew, bacteria and other micro-organisms. Spores from these micro-organisms are then regularly blown into the passenger cabin and colonize inside the in-car environment. MiST is highly effective in treating vehicle HVAC systems as well as cabin surfaces restoring the in-car air quality of your customer

Get Info Now

VPCSU Series Pumps

Product From CPS Products

CPS Products offers the VPSCU Series compact vacuum pumps in 2 and 4 CFM, engineered to provide professional grade performance in an ultra-compact footprint, the company says. Features include an oil-mist preventer cap; extra large oil sightglass and drain plug; a high-performance vacuum cartridge design that delivers deep vacuums; and high-impact plastic and rubber constructed bases and environmental treated aluminum chassis. The pumps measure 9” lg at 9 lbs for the VPC2 and 11” lg at 11 lbs for the VPC4.        

Get Info Now

Pro-Set Heavy Duty Manifold Series No. MT7I7A6Q

Product From CPS Products

CPS Products Pro-Set Heavy Duty Manifold Series, No. MT7I7A6Q, features 3-1/8" gauges with boots and triple O-ring seals piston valves design. This tool provides Gorilla Grip Rubber over metal knobs that grip even with extremely greasy hands and a 6' hose with manual couplers. Comes in a a custom fitted carrying case to provide protection even with the hoses connected to the manifold.

Get Info Now

Click Lock A/C Security System

Product From AirSept Inc.

The Airsept Click Lock A/C Security System is a unique new tool that alerts service providers if an air conditioning system has been opened since the repair shop last serviced the system. The Click Lock tamper-proof cap features a one-piece heat-resistant plastic housing that snaps closed around an A/C service fitting. Once closed, Click Lock cannot be opened without visibly damaging the cap. It fits over standard High or Low Side service fittings. The locking mechanism snaps together by hand. Each Click Lock tool is labeled with a unique serial number. This allows easy repair order tracking.

Get Info Now

The Purifier programmable ozone machine No. 170AIR

Product From Cliplight Manufacturing

Cliplight offers The Purifier programmable ozone machine, No. 170AIR. This machine eliminates obvious and offensive odors from cigars, cigarettes, fast food, and even the family pet, and eradicates the less obvious and more dangerous mold, mildew, bacteria, and other pollutants that cause respiratory/health issues. To use The Purifier, plug in the cigarette/accessory adapter or run from 110V or 220V main power, program the 'timer' for the size of job and press the 'power' button. Safely completes most jobs in only 20 minutes.

Get Info Now

VaporVue Vapor Charging Device

Product From Uniweld Products, Inc.

Uniweld Products introduces the VaporVue Vapor Charging Device that absorbs heat naturally and flashes the liquid refrigerant from the cylinder, charging into the system as a vapor. Connecting the VaporVue to the low side of a charging manifold will increase the charging rate. The liquid is controlled by adjusting the manifold valve and monitoring the vapor rate through the double-sight glass. The VaporVue is factory pressure-tested at 8,900 psi and can be used to charge any system using R410a, CFC, HCFC and HFC, Zeotropic and Azeotropic refrigerants, without danger of liquid slugging and destroying the compressor. 

Get Info Now