Snap-on's Soft-Grip Dished Trim Pad Tool Set offers an easier, more comfortable way to remove trim retaining clips on Ford, GM and Toyota vehicles, without damaging the hardware or vehicle. A smoother taper and wider receptor on the blade allow the tool to slip between the retaining clip and panel in acting as a removal lever against conical x-mass style retainers. The set comes with two tools of different lengths for accessing a variety of clip locations.
Soft-Grip Dished Trim Pad Tool Set
- Product From ATEQ Corporation
The ATEQ MitsuReset tool is a one-touch TPMS re-learn module for the Mitsubishi Lancer, Outlander and Mirage, which previously required the use of an expensive scan tool coupled with a TPMS trigger tool in order to reset a TPMS system. ATEQ’s standalone MitsuReset allows technicians freedom to use any other TPMS trigger tools like the ATEQ VT55 diagnostic tool, the ATEQ VT30 or VT15 trigger tools. The MitsuReset tool is easy to use, fully updateable with a computer, and is compatible with all TPMS trigger tools capable of triggering Mitsubishi sensors.
- Product From Cal-Van Tools
The Horizon Tool 12-Point Metric Axle Nut Socket Set, No. 976, fits axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep Audi, Volkswagen and BMW makes, and many more. The set comes with a blow molded case and i
- Product From Innova Electronics Corp.
The Innova Quicklink device pairs with a smart device for immediate access to a virtual dashboard of information that can help keep vehicle owners safe, save time and money and provide peace-of-mind. The Quicklink can be used to solve check engine problems, check for road trip readiness, double-check automotive repair shop estimates, improve fuel economy and more. It is compatible with 1996 and newer import and domestic cars, light trucks, minivans, SUVs and hybrids. Quicklink users also have easy access to RepairSolutions online free basic reports.
- Product From Fluid Rx Diagnostics
The Fluid-Science Vital Fluids Analysis Report Card, No. 95120-CVT, by Fluid Rx Diagnostics, provides a quick and easy way to identify the true condition of Nissan fluids. This Instant Lubricant Diagnostics kit provides service personnel and customers with a simple, on-the-spot evaluation that shows the actual condition of all Nissan and Infiniti fluids including brake, power steering, CVT transmission and transfer case fluids. There is no guesswork, and the results are verified within seconds of fluid testing. Only one drop of the Nissan CVT is needed to accurately measure the condition of a vehicle’s fluid and results are instant.
- Product From Ernst Mfg.
The Ernst Greg’s Hard Shell Engine Protector protects engines from damaging dust, dirt, debris and hard objects. This shell fits first generation Chevrolet small block V-8 engines, either long or short block, standard and vortec head. The cam valley cover is used to protect engines when intake manifolds are removed, and the cylinder deck covers protect the cylinder block deck and pistons when heads are removed. This protector also offers enough clearance for domed pistons.
- Product From Bartec USA
The Bartec Mitsubishi Assisted Relearn allows aftermarket technicians faced with installing a new TPMS sensor on the Mitsubishi Lancer, Outlander and the new Mirage, to complete the all-important relearn step right in their service bay. The Mitsubishi Assisted Relearn process provides full diagnostic capability in addition to completing the proper relearn. The Mitsubishi Assisted Relearn process includes testing the sensors installed, detecting and recording DTCs (fault codes) and verifying that the proper sensors were relearned. All of this information will be stored on the tool and technicians can easily print the Bartec TPMS Audit Report for the customer.
- Product From Assenmacher Specialty Tools (AST)
The Assenmacher Specialty Tools Mini Cooper Fuel Line Tool, No. MC 814, is used to disconnect the fuel line from the high-pressure fuel pump that is driven by the mechanical connection to the intake camshaft. It is comparable to the Mini Factory Tool, No. 130250, and can be used on 2007-2013 Mini Cooper Turbo models. This tool is made in the U.S.A.
- Product From Snap-on
The Snap-on 3/8" Drive 3-1/8" T40 Bit Socket, No. S6340E, is the tool for servicing injectors on the Ford 6.0L Power Stroke Diesel Engine.This tool allows users to remove and install hold-down fasteners. According to the manufacturer, a regular length T40 bit socket is too short and a long T40 bit socket is too long when used with a ratchet or torque wrench and will not fit the application. The S6340E has a 3-1/8" length and is specially made for the removal and reassembly of Ford Power Stroke 6.0L diesel injectors.
- Product From Ko-ken Tool Co., Ltd.
The Ko-ken Tools Spark Plug Sockets with Spring Clip is designed to securely grip a spark plug at its hexagonal part by two stainless spring clips. An internal brass guide holds the clips in place, which ensures perfect alignment of the spark plug into the threaded plug hole of the cylinder head, thus preventing thread damage. The brass guide also eliminates stress loading and possible damage to the ceramic insulator of the spark plug.
- Product From E-Z Red Company
E-Z Red Side Terminal and Group 31 Terminal Brushes, No. 506COSSHQD, clean the side terminal battery terminal and Group 31 battery terminal (the center opening to accommodate the threaded stud) using an electric or pneumatic drill. The brush features a steel shaft with quick-disconnect. This tool is recommended for use up to 800 rpm.