Ball Joint Press Master Kit No. BJP1

Ball Joint Press Master Kit No. BJP1

Ball Joint Press Master Kit  No. BJP1 Product Image

Snap-on offers the Ball Joint Press Master Kit, No. BJP1, made to help technicians save time when servicing press-in style ball joints, The kit covers 99 percent of domestic applications with 15 adapters. The C-ring retention system locks adapters to the BJP1 frame for easy handling, and all adapters can mount to either the frame or pressure screw. Made from high-strength chromoly steel, the adapters are heat-treated to higher hardness, giving better wear resistance. The set can fit in a 4" drawer for easy storage.on domestic vehicles.

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Ford Spark Plug Removal Kit, No. 6918

Product From OTC, Bosch Automotive Service Solutions

The OTC Ford Spark Plug Removal Kit, No. 6918, helps eliminate plug breakage upon removal, speeding up the process of removing and replacing plugs for notoriously difficult-to-remove Ford three-valve engines that features a two-piece spark plug design. It locks the plug porcelain core to the protruding

Get Info Now

Duramax Water In Fuel Sensor Wrench No. 13100

Product From SP Tools/Schley Products Inc.

When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter. The SP Tools Duramax Water In Fuel Sensor Wrench

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now