Air brake/treadle valve holding tool 67400

Air brake/treadle valve holding tool 67400

Air brake/treadle valve holding tool 67400 Product Image

Air brake/treadle valve holding tool Shley Products' specially designed holding tool, No. 67400, was manufactured to hold two treadle valves so that the attaching air pressure fittings can be exchanged from the old valve to the new valve. When holding the two valves side by side, the same exact angle of the pressure fitting can be attained. Some of these valves can have up to eight or more pressure lines with check valves. The tool has been blanchard ground flat and comes with attaching hardware.

Expand for more details on this Product

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Fluid Line Stopper Kit, No. FLS330

Product From S.U.R.& R. Auto Parts Inc.

The S.U.R. & R. Fluid Line Stopper Kit, No. FLS330, is designed to stop the mess when replacing fluid lines. It can help make line repair work easier and cleaner to perform.This kit features a cone-shaped tip and the spring-loaded stoppers lock into place to plug the line. Leaking ends and fluids are kept safe from the risk of contamination. Included within the kit are four stoppers, which can be used to plug lines 3/16" to 1/2" as well as those using a banjo-style connection. The stoppers are also available for purchase individually.

Get Info Now

Extra Long Air Hammer Pneumatic Drifts No. 11600

Product From SP Tools/Schley Products Inc.

The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including shock bolts and suspension arm bolts. These bolts are often too long for conventional pin punches or tapered drifts to push the bolt through a rusty bushing sleeve. 

Get Info Now

Premium Fiberglass Truck Wheel Weight Hammer

Product From Ascot Supply Co.

The Ascot Supply Co. Premium Fiberglass Truck Wheel Weight Hammer allows users to easily remove or install all types of lead, steel and zinc clip-on truck wheel weights and it is made with a fiberglass shaft for a lifetime of use. With comfort and ease of use in mind, the hammer comes with a slip-resistant and durable rubber ergonomic grip that reduces arm strain and fatigue. The wheel weight hammer also comes with new chromoly hooks designed for large truck weights and a longer handle that provides added reach for truck wheels. The extra large striking face of the hammer has a non-marring surface with a protective medium-hard replaceable tip.

Get Info Now

Vacuum Brake Bleeder, No. MV6870

Product From Mityvac

Mityvac's Vacuum Brake Bleeder, No. MV6870, bleeds brakes and hydraulic clutches by utilizing compressed shop air between 60 and 150 psi. The brake bleeder features a compact, 1.3-quart (1.2L) reservoir and 4' (1.2M) bleed hose with molded support. The unit offers a comfortable, lever-action throttle with lock-on latch and a durable composite handle for long service life. It 

Get Info Now

Powerbuilt Self Adjusting Oil Filter Pliers

Product From Alltrade Tools

The Powerbuilt Self Adjusting Oil Filter Pliers, from Alltrade Tools, automatically adjust to the size of the filter to be removed. These pliers allow for single-hand operation, performing three times faster than conventional filter pliers, according to the company. The uniquely designed mechanisms tighten as users turn the tool – the more users turn, the tighter the pliers grip. It is self-adjusting, simple to use and breaks loose stubborn oil filters with ease. The no-slip grip and padded dipped handles provide comfort so users can easily hold the tool. The opening size fits all filters, from 2-1/4” to 4-3/4”, conforming to any style of filter. Layered steel construction and serrated jaws provide greater durability and a tighter gripping force.

Get Info Now