Spoolmate extends to aluminum welding Miller Electric's Spoolmate 100 Series is designed primarily for anyone who does occasional aluminum welding. The series features a recessed contact tip and a clear spool cover to help reduce the number of burnbacks. The 100 series also features dual V-knurled drive rolls to ensure consistent feeding of aluminum. Users can also adjust drive roll tension to match the wire being used. The Spoolmate 100 series comes standard with a 12-foot gun cable, and comes in a convenient carrying case that also holds extra contact tips, nozzle and wire spool.
Spoolmate 100 Series
From Miller Electric
- Product From Martech Services Co.
Compliance with the OSHA requirement for Grade "D" Breathable Air can be accomplished with the use of the Personal Air Breathing Unit Model No. P-20, manufactured by Martech Services Company. When used properly, the unit will work with the existing filtered compressed air supply, providing air for a proper NIOSH-approved respirator, and with the provided 54" tool air hose assembly, it will allow for a bypass of air for a paint spray gun. The unit is a 20 scfm system, allowing for use with full hoods, equipped with vortex cooling tubes, and provides the breathable air required to protect painters, blasters, and welders.
- Product From Weldcraft
Weldcraft has expanded its premium tungsten electrode offering to include two percent lanthanated and zirconiated tungsten electrodes. The two percent lanthanated tungsten electrodes are a good substitute for two percent thoriated tungsten electrodes. The new zirconiated tungsten electrodes resist spitting in higher current applications, minimizing the opportunity for tungsten contamination. These electrodes also provide excellent arc starts and stability, and ball up easily in AC applications, ensuring a smooth arc. Weldcraft offers all of its tungsten electrodes in seven-inch lengths and in five industry-standard diameters (0.040", 1/16", 3/3two", 1/8" and 5/3two").
- Product From Tapeswitch Corporation
Tapeswitch Corporation manufactures pressure sensitive electrical edges that stop a machines operation in key presence sensing conditions depending on the product selection. These products are used for safety, sensing and detection among many operations throughout the world. Improve shop safety with safety edges for lifts, toe activation for machinery, safety bumpers for vehicle detection, road switch mats for vehicle counting. Offer trapped key interlocks and non-contact interlocks for guarding of machining and equipment areas, power switching of machinery and access control.
- Product From Tregaskiss
Tregaskiss had made its Quick Load Liners standard on Tough Gun and TGX Semi-Automatic MIG Guns. Quick Load Liners have been standard on all Tough Gun Robotic and Automatic MIG Guns since 2010. Installed from the front end of the MIG gun, Quick Load Liners require less than half the time of a conventional liner replacement. To replace a Quick Load Liner, the welding operator simply removes the front-end consumables and feeds the liner through the front of the MIG gun and over the wire, using it as a guide. Quick Load Liners accommodate wire sizes from .023" to 3/32".
- Product From DEWALT
DEWALT announced the launch of a full range of Wearable Backing Flap Discs and Extended Performance Flap Discs. DEWALT engineered a stronger cloth with a better grain and resin formula compared to their other high performance discs, and then optimized the design of each flap width, length and number of flaps. The new Wearable Flap Discs utilize the flap design of the Extended Performance discs plus the new DEWALT-exclusive wearable backing feature. The backing automatically wears away at the same rate as the cloth, allowing full use of the cloth.
- Product From Weldcraft
Weldcraft now offers six models of stainless steel water coolers designed to provide consistent, long-term cooling performance on both TIG and MIG welding applications, as well as plasma cutting operations. Each of the water coolers is available in 115V and 230V models and operates on single-phase power with 2-gal., 3-gal. or 6-gal. reservoir sizes available. These water coolers include factory preset pressure release valves that maintain consistent pressure during operation. Come with 10' power cords to allow for greater maneuverability around the workspace.
- Product From Steck Manufacturing
The Mig Torch Holder, from Steck Manufacturing, attaches directly to the car so the torch head can be held close to the welding activity, eliminating the need to continually lay hot welding torch heads on the floor and pick them back up. Constructed of polypropylene with two prong metal 26mm rods to hold the hot torch head safely out of the way, th Mig Torch Holder also has spring-mounted floating magnets which allow it to adjust to the contour of the body panel. Designed to work with all common Mig, Tig and Plasma torch heads.
- Product From Arndt Enterprises Ltd. (AEWI)
Arndt's Sure-Sharp Mini Nozzle Cleaning Station, No. AE-153.245, is for hand-held MIG welding guns and adjust to any nozzle diameter. Features:
- Reaming blades for all nozzles and contact tips.
- Easy mounting and setup.
- Product From Victor Equipment Co.
Victor's ESS3 medium-capacity Edge Series regulator, from Thermadyne, has single-stage gas regulators and is available for acetylene, oxygen, CO2, inert and LP gases.
- Product From Bernard Welding
Bernard Welding Equipment's Dura-Flux self-shielded flux-cored welding guns include a variety of trigger guards, cable lengths, neck styles and direct plugs. Bernard now offers six different cable lengths, from 8' to 25', and the choice between a small trigger guard and a large heat shield. Dura-Flux offers direct plugs for Miller, Lincoln, Euro and Tweco 4-wire feeders.