2/3 Jaw Gear Puller No. PJ707 and PJ404

2/3 Jaw Gear Puller No. PJ707 and PJ404

2/3 Jaw Gear Puller No. PJ707 and PJ404 Product Image

2/3 Jaw Gear Puller changes from 2-jaw internal to 3-jaw external in seconds Mac Tools introduces the new 2/3 Jaw Gear Puller No. PJ707 and PJ404. The gear puller comes in lengths of four and seven inches. A moveable top plate enables quick changing from a 2-jaw internal to a 3-jaw external puller by unscrewing the top plate. The locking mechanism latches jaws into place while reducing slippage and enabling better pulling control. Complete with a polished chrome and black oxide finish that resists corrosion, the puller is easy to operate and provides versatility and control.

Expand for more details on this Product

78065 PWM Power Pro

Product From Hickok/Waekon

The Hickok/Waekon PWM Power Pro supplies, measures and displays variable current providing enhanced diagnostics for components and their related wiring harness. Current is supplied to DC and PWM components being tested using Pulse Width Modulation, allowing the current output percentage to be manually adjusted from 0 to 100 percent, in one-percent increments. This tool delivers 0-40 amps and displays actual current draw. This kit includes the main unit with 7' cable, two 3' 40 test leads, two battery clips, two alligator clips, two female spade probes and one male spade probe.

Get Info Now

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Wire Insertion Tool Set, No. 61030

Product From Lisle Corporation

The Lisle Wire Insertion Tool Set, No. 61030, includes the 1/4" O.D. and 3/8" O.D. wire insertion tools for installing or repairing audio equipment, aftermarket lighting, alarm systems and much more. With a sharp point on the end and palm-size handle, these tools provide extra leverage to pierce through firewalls, rubber grommets and panels. The 10-1/2" steel tube provides easy access to feed wires through the firewall. These tools are also available individually.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

TH513 Delphi Jumper Wire and Circuit Replacement Kit

Product From Thexton Manufacturing Company, Inc.

The Thexton TH513 Delphi Jumper Wire and Circuit Replacement Kit is designed to test and replace defective Delphi terminals. This kit includes all of the necessary jumper wires, test leads, terminals, butt splices, terminal release tools and heat shrink to repair most damaged Delphi circuits. If a terminal is deemed defective simply remove the terminal using the correct terminal release tool provided in the kit, cut the defective wire off and splice in a new wire using the parts provided in the kit.

Get Info Now

ATEC Cordless Under Hood Work Light No. 12-1017

Product From Associated Equipment

The Associated Equipment 12-1017 ATEC Cordless 6x1 Super Bright SMD LED Light offers the first cordless, rechargeable underhood worklight for the professional technician, says the company.  The 360-degree ratcheting aluminum alloy padded handles/hooks extend from 47" to 75", easily attaching to most vehicle hoods or be used as a standalone under vehicle worklight.  The light provides 400-500 lumens of bright light for up to three three hours of continuous run-time.  Featuring a 7.4V 2200mAh Li-ion rechargeable battery, this worklight allows users the flexibility to use in a situation where no AC power is readily available or where mobility is key for efficient service. OE automotive manufacturer tested and approved.

Get Info Now

Universal Seal Puller Kit No. 850

Product From Lang Tools

The unique design of the Lang Tools Universal Seal Puller Kit, No. 850, allows the user to have various angles and leverage points to engage and remove a seal. The jaw width will engage a larger surface area than the competition, says the company, 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

SK 6640 Body Clip & Rivet Removal Tools Set

Product From SK Hand Tool, LLC

The SK Hand Tool 6640 Body Clip & Rivet Removal Tools Set is designed specifically to pull multiple body clip styles and reach tight areas. This set features an 11 position, 165-degree range of motion and adjusts to tough angles. The tapered tips allow entry under flush-mounted clips and a low-profile, extended neck reaches tight areas, and the t

Get Info Now