4-Piece Butterfly Socket Set

4-Piece Butterfly Socket Set

4-Piece Butterfly Socket Set Product Image

Labor And Time Saver MAC Tools introduces to the industry, the 4 Piece Butterfly Socket Set (P/N SXBS46MM), that is constructed of Chrome Molybdenum with a black oxide finish and comes with a blow molded storage case. This Set offers a unique, closed ring design allowing the technicians to wrap the correct socket around the device or fastener that needs to be loosened. These sockets can be used when and where a conventional socket fails and is ideal for use on tie rod jam nuts, hydraulic and a/c fittings and/or engine and oxygen fittings. This set features a distinctive drive system which lets each socket be used with both metric and SAE fasteners and can be used with any standard +" drive ratchet or breaker bar. This set includes 4 dimensions:

  • P/N XBS17MM, 17-18mm (11/16").
  • P/N XBX19MM, 19-20mm (3/4").
  • P/N XBX21MM, 21-22mm (7/8").
  • P/N XBX24MM, 23-24mm (15/16").

Expand for more details on this Product

70 pc. 1/4", 3/8", 1/2" Dr. Master Socket Set, No. 949007

Product From Alltrade Tools

The Powerbuilt by Alltrade Tools 70 pc. 1/4", 3/8", 1/2" Dr. Master Socket Set, No. 949007, is organized in high-end EVA foam trays that slide right into the drawers of a tool box. This set is made of chrome vanadium steel construction and is drop forged and heat treated for maximum durability. The m

Get Info Now

Pro Non-Slip Impact Sockets

Product From Matco Tools

Matco Tools Pro Non-Slip Impact Sockets are constructed of chrome-molybdenum, and are specially heat-treated to provide continuous impact use. An enhanced 6-point contact design with socket teeth grip the flat sides of the fastener to drive a nut that is up to 70 percent rounded off. These sockets feature easy identification with high visibility laser and impression-stamped size markings. The unique non-slip design protects and works on 6-point, 

Get Info Now

LT598 ShockIt Socket Set

Product From Lock Technology, Inc. (LTI Tools)

The Lock Technology LT598 ShockIt Socket Set includes very low-profile sockets to fit over frozen nuts and bolts.  The sockets have a raised flat edge.  Included is a custom offset punch designed to fit the raised edge of the socket, allowing the technician to firmly and securely shock the fastener loose using a hammer.  Available in a 5-pc set with a custom punch and magnetic storage rail, this set includes the following sizes: 

Get Info Now

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

3/8" Drive 81-Piece Fractional & Metric Master Impact Socket Set No. 1281

Product From Grey Pneumatic

Grey Pneumatic offers a 3/8” Drive, 81-piece Fractional & Metric Master Impact Socket Set, No. 1281. This set contains the most popular 3/8” drive 6-point sockets and universals with extended range metric sizes up to 22mm. Also included is a 3” extension, universal joint and 1/4" hex to 3/8” square adapter for use with hex drive impact tools. All packed in a compact, low-profile, blow molded storage case which can be used as a toolbox organizer when the cover is removed. 

Get Info Now

51 Pc. 1/4" Drive 12XP SAE/Metric 6 Point Standard & Deep Socket Set, No. 80300P

Product From GearWrench/Apex Tool Group

The Gearwrench 51 Pc. 1/4" Drive 120XP SAE/Metric 6 Point Standard & Deep Socket Set, No. 80300P, features the Double-Stacked Pawl technology of the 120XP ratchet. The 120XP delivers 120 positions in 360 degrees for an ultra-narrow, three-degree swing arc while delivering 180 percent of ASME torque performance. The 120XP ratchet has a teardrop low-profile head and a flush-mounted on/off switch for improved access. The sockets feature surface drive technology to reduce fastener rounding. The set includes full-polish chrome sockets with large hard stamp size markings, knurled, full-polish extensions and a storage case.

Get Info Now

Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954

Product From Ajax Tool Works Inc.

The Ajax Tools Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954, are used to remove anchor pins and install bushings on trucks, trailers and buses between 16,000 and 30,000 lbs. These kits eliminate the need to heat seized pins and bushings during the removal process and reduce removal and installation time by 60 to 70 percent. The A166 is a .401 shake brake pin bushing driver set that consists of one A1114 and A1115, and the A954 is a .498 set that includes one A956 and A957.  The overall lengh of drivers is 10-1/4”.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now