Ken-Tool cap removers won't damage mags Ken-Tool has introduced two new tools that solve the problem of removing center caps from mag wheels. The two tools, one with a narrow blade and one with a wide blade, are covered with a rubber sheath for added protection, allowing them to remove the center caps without damage. Part numbers are: narrow blade '#8211; 31566, wide blade '#8211; 31565 and kit containing both '#8211; 31564.
center cap removers for mag wheels
- Product From Megatester Inc.
The Megatester Multi-Tester is a super bright LED flashlight with a built in electrical tester that can outshine most "D" flashlights, according to the company. It is compact enough to carry all the time and can test almost all un-energized circuits 3V to 220V AC+DC circuits. Megatester can also trace wires and find bad grounds. This unit comes with two holsters: one velcro holster and one belt holster, for convenient access to flashlight and tester at all times. This unit comes with a push-button switch and How-To-Test guide, which explains how to perform basic safe testing. Megatester is made to the highest quality standards, backed by the company's unconditional lifetime guarantee.
- Product From Bee Line
Bee Line designed the Space Saver Ramp to be installed in a smaller area than a standard ramp alignment system by reducing the total number of machine sections required. The design of the Space Saver allows a major portion of the ramp to be raised hydraulically to an operating level equal to the height of the Advanced Aligner Runways. The longer design of the Space Saver lifting ramp creates a more gradual incline, therefore requiring less runway sections. Once the truck is in position, the runways are hydraulically lifted with the touch of a button. The approach ramp incline angle allows low profile buses and RVs to drive on without bottoming out.
- Product From E-Z Red Company
The E-Z Red Wrench Connection set connects almost any 6-point or 12-point tool to another, making the possible angle and leverage combinations almost limitless. Molded-in magnets assure hold, allowing these tools to connect any wrenches to each other no matter how long, short or offset they may be. Also connect socket to wrenches with or without the use of extensions, or no matter how deep or shallow sockets may be. Two sizes available: No. WC100 low-profile metric Hex set includes sizes 8mm-19mm; No. WC200 low-profile SAE hex set includes sizes 1/4” to 13/16”.
- Product From Blair Equipment Company
The Blair Flanger quickly produces steps joints for panel repair and welding. Repairs can be made faster because there is no need to remove the panel from the vehicle and there is no distoration of the material. The Flanger is lightweight and has a 7" cam action that quickly springs back open for positioning of the next step. Made in USA.
- Product From BrakeQuip LLC
BrakeQuip offers a professional kit (No. BQ350), standard flaring tool kit (No. BQ351), a 37 degree only kit (No. BQ352) and a 37 degree kit for anyone who has a Sykes Pickavant 270 series flaring tool kit (No. BQ352-SP). The professional kit (BQ350) creates 37- and 45-degree single and double flares as well as DIN.
- Product From Anglo American Tools
The Anglo American Tools Kukko 3-Arm Quick Adjusting Universal Pullers were diligently and cleverly designed to contain features such as the use of “ArmLock” technology, which guarantees maximum stability of the sliding arm and the claw. The geometry of the puller’s crossbar and sliding parts has been optimized (rounded) to ensure particularly easy movement of the extractor hooks along the crossbar, while offering a rock-solid hold once positioned on the bolts. The knurled-knob adjusters enable quick loosening, positioning and tightening of the puller arms by hand, requiring no wrench.
- Product From Lang Tools
Lang Tools introduces the Rapid Tire Deflators with TPMS Location Marks, No. 401. The cut-out on the side of the socket allows for quick and easy deflation of tires. The back side of socket has a recess so when the tire is re-inflated, the socket can go on the cap to retain the TPMS location. Sockets are marked with TPMS locations (Right Front – RF, Left Front – LF, Right Rear – RR, Left Rear – LR). Bright anodizing makes sockets easily visible on most tires and rims. Patent pending. Made in USA.
- Product From OTC, Bosch Automotive Service Solutions
The OTC Hub Grappler Kit, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This kit eliminates unnecessary alignments or the use of a shop press. The tools, along with the manual, provide the capability to remove the hub and the bearing, and replace both on domestic, Asian and European vehicles. It applies to cars, trucks, vans and SUVs that have replaceable wheel bearings and can be used on either front-wheel or rear-wheel drive applications.
- Product From Mueller-Kueps LP
The Excentric Turn Chuck from Mueller-Kueps has a unilateral opening that allows universal usage for wheel alignment as well as easy ball-joint and inner-tie-rod replacement. Features:
- Maximum grip on hardened surfaces.
- Product From Martins Industries
Martins Industries now offers Wheel Washers, available in three models. The models MWW-450 and MWW-550 are ideal for garages, tire shops and dealerships. The MWW-750 model is fully automatic, loading and reloading wheels that are brought on carts. It is the ideal model for larger volumes of wheels for companies such as tire warehouses, hotels and tire distributors. This machine does not need to be connected to a water source to work, making it possible to place the wheel washer at the most suitable place in the workspace.