PAX Tire System Kits and Orbiter Workstation

PAX Tire System Kits and Orbiter Workstation

PAX Tire System Kits and Orbiter Workstation Product Image

Hunter has made PAX tire system kits available for their TC3500, TC3250, TCX550BPS and TCX500BPS tire changer models to give shops a variety of equipment choices that can handle both conventional bead and PAX system tires. Hunter tire changing equipment is approved for servicing all Michelin® PAX tire systems. Hunter also offers the patented Orbiter Workstation to simplify insertion and extraction of the PAX support ring. The system, designed to keep both hands free to handle tires, operates with a single foot pedal.

Expand for more details on this Product

Wheel Balancer, No. WBE 4230

Product From Robert Bosch Corporation

The Bosch Wheel Balancer, No. WBE 4230, is designed to easily and quickly mount and balance tires. A high-performance mounting set, a quick mounting nut and an extended shaft are included for accurate and fast mounting. This wheel balancer provides the ability to handle light truck tires and a greater variety of wheels for a more precise balance. The machine also comes with the Bosch Wheel Service Promise to restore the machine to full operating condition within 48 hours of any repair appointment, or Bosch will extend the factory warranty.

Get Info Now

Lisle Wheel Stud Pilot Pin Set, No. 13950

Product From Lisle Corporation

  
The Lisle Wheel Stud Pilot Pin Set, No. 13950, makes it easier to remove and install wheels on many European vehicles with lug bolts. Three pairs of metric threaded wheel stud pilot pins allow users to hang the wheel without having to balance the wheel on the small lip of the hub. This helps prevent the wheel from falling and causing damage or injury. Users can simply insert the proper size threaded pins into hub bolt holes to hold the wheel in place while inserting or removing lugs. This set includes 12mm by 1.5mm, 14mm by 1.25mm and 14mm by 1.5mm threaded pins, which are also available individually.

Get Info Now

B-100 Wheel Balancer

Product From Dannmar Equipment

The Dannmar Equipment B-100 Wheel Balancer offers a quick-nut mounting system, a labeled graphic interface with a touch-display panel, a 38” front-to-back coverage wheel shroud, a multi-pocket wheel weight shelf with over 14 pockets, multi-mode balancing, a power-saving mode, automatic measurement and input of distance and diameter and a 140-rpm design. This wheel balancer has a 12” balancing shaft and can accommodate wheel diameters of 44” maximum. The approximate balancing time is five seconds and the precision is within 1 gram. This unit comes standard with SUV balancing modes, and is equipped with motorcycle wheel calibration modes.

Get Info Now

Passenger Vehicles Wheel Balancer, No. B80SE

Product From MAHA USA LLC

MAHA USA's Passenger Vehicles Wheel Balancer, No. B80SE, features a quick and accurate speed of operation that includes an automatic three parameter data entry, resulting in no chance for the user to enter incorrect data. In includes a s

Get Info Now

Motorized Wheel Balancer, No. EEWB304D

Product From Snap-on Inc.

Snap-on Motorized Wheel Balancer, No. EEWB304D, can be used on passenger cars, light trucks and light commercial vehicles. It includes two parameter automatic entry devices to measure rim offset and distance by touching the distance gauge to the rim without any other user input. It includes a molded weight tray that has 16 weight storage pockets, static mode for single-plane narrow wheels, dynamic mode for dual-plane balancing, five ALU-S modes provide multiple combinations of hammer and adhesive weight placements, Hidden Weight Mode for weight placement behind spokes and Fine Weight Toggle allows for extra light weight placement.

Get Info Now

DST64T wheel balancer

Product From Ranger Products

Ranger Products' DST64T wheel balancer comes equipped with revolutionary DataWand and an inner data set arm allowing operators to quickly and automatically enter wheel parameter settings in less than three seconds, for exact balancing every time. A soft-touch key pad and display panel includes dynamic, static and variable alloy settings and features dynamic tire and wheel graphics to help guide technicians through balancing procedures.

Get Info Now

Speedliner adhesive wheel weight tape

Product From Hofmann-USA

Hofmann Speedliner adhesive wheel weight tape features an even higher initial tack as well as the ability to remove the weight from the wheel rim without leaving any traces, according to the company, making balancing easy. The weights have a patented new type of adhesive strip with a five-layer structure. They have a special intermediate reinforcement film with exceptional tear-resistant properties ensuring strong cohesion within the adhesive strip. These weights can now be torn even more easily than before and leave a clean tearing edge when individual segments are separated off.

Get Info Now

K8 compact balancer

Product From BL Systems/CEMB, USA

CEMB's K8 compact balancer can be used in gas stations, small and medium size car automotive garages. It balances steel and light alloy wheels of cars, light trucks, motorcycles and scooters with optional adaptors. The balancer also features self-diagnosis and self-calibration, menus for quick selection of units of measurement, optimization program for compensation of rim and tire unbalance, programs for "static" balancing and the balancing of different types of rims, standard quick nut mounting, one button split and hidden weight program, and a 10-compartment weight tray.

Get Info Now

Corghi HD700 Tire Changer and ET66 Wheel Balancer

Product From Bee Line

Bee Line's Corghi HD700 Tire Changer and ET66 Wheel Balancer offers shops the ability to service the tires of an array of vehicles. The ET66 benefits from being user-friendly and capable of handling a max tire weight of 440 lbs. It has a spin time of just 17 seconds. The HD700 includes a ramp on the carriage with left-right movement, allowing technicians to easily maneuver tires onto the jaws. Tubeless or inner tube-type tires, as well as skid steer tires, can be slid on or off the rim quickly and effortlessly, with rim sizes from 14" to 26".

Get Info Now

Heavy duty RB24T wheel balancer

Product From BendPak/Ranger

Ranger Products’ heavy duty RB24T wheel balancer can handle truck tires up to 50” in diameter and 20” wide. Although best suited for buses, trucks and OTR wheels, the Ranger RB24T can accommodate automotive and light truck wheels as well. The RB24T features Drive-Check technology that simulates road and driving speed conditions and measures computer-generated imbalance of the tire and wheel assembly automatically. It then recommends the most cost effective weight optimization correction as needed, which minimizes weight usage and maximizes productivity. An integrated wheel lift easily lifts the heaviest wheel assemblies for effortless mounting on the balancer.

Get Info Now