TSBs and ALLDATA Repair Information for WinAlign 7.2 Software

TSBs and ALLDATA Repair Information for WinAlign 7.2 Software

TSBs and ALLDATA Repair Information for WinAlign 7.2 Software Product Image

Hunter and ALLDATA have combined the ALLDATA Undercar Information and Hunter's WinAlign Alignment Software that allows technicians to look up data in one entry, eliminating the need to re-enter the data, saving time. This combination also presents important technical service bulletins (TSBs) to technicians before they start making any adjustments and uses a local i

  • SHOP-based interface to transfer important vehicle data between the two programs, which are designed and sold separately by the two companies.

Expand for more details on this Product

Space Saver Alignment Runway Systems

Product From Bee Line

Bee Line designed the Space Saver Ramp to be installed in a smaller area than a standard ramp alignment system by reducing the total number of machine sections required. The design of the Space Saver allows a major portion of the ramp to be raised hydraulically to an operating level equal to the height of the Advanced Aligner Runways.  The longer design of the Space Saver lifting ramp creates a more gradual incline, therefore requiring less runway sections. Once the truck is in position, the runways are hydraulically lifted with the touch of a button. The approach ramp incline angle allows low profile buses and RVs to drive on without bottoming out.

Get Info Now

Rapid Tire Deflators with TPMS Location Marks No. 401

Product From Lang Tools

Lang Tools introduces the Rapid Tire Deflators with TPMS Location Marks, No. 401. The cut-out on the side of the socket allows for quick and easy deflation of tires. The back side of socket has a recess so when the tire is re-inflated, the socket can go on the cap to retain the TPMS location. Sockets are marked with TPMS locations (Right Front – RF, Left Front – LF, Right Rear – RR, Left Rear – LR). Bright anodizing makes sockets easily visible on most tires and rims. Patent pending. Made in USA.

Get Info Now

Hub Grappler Kit, No. 6575

Product From OTC, Bosch Automotive Service Solutions

The OTC Hub Grappler Kit, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This kit eliminates unnecessary alignments or the use of a shop press. The tools, along with the manual, provide the capability to remove the hub and the bearing, and replace both on domestic, Asian and European vehicles. It applies to cars, trucks, vans and SUVs that have replaceable wheel bearings and can be used on either front-wheel or rear-wheel drive applications.

Get Info Now

Excentric Turn Chuck

Product From Mueller-Kueps LP

The Excentric Turn Chuck from Mueller-Kueps has a unilateral opening that allows universal usage for wheel alignment as well as easy ball-joint and inner-tie-rod replacement. Features:

  • Maximum grip on hardened surfaces.
Get Info Now

Wheel Washers

Product From Martins Industries

Martins Industries now offers Wheel Washers, available in three models. The models MWW-450 and MWW-550 are ideal for garages, tire shops and dealerships. The MWW-750 model is fully automatic, loading and reloading wheels that are brought on carts. It is the ideal model for larger volumes of wheels for companies such as tire warehouses, hotels and tire distributors. This machine does not need to be connected to a water source to work, making it possible to place the wheel washer at the most suitable place in the workspace.

Get Info Now

Universal Hub Puller HD with Plate No. 6574

Product From OTC, Bosch Automotive Service Solutions

The SPX Brand OTC Universal Hub Puller HD with Plate, No. 6574, aids technicians servicing wheel hubs, axle shafts and other tough pulling applications. This rugged hub puller is well suited for pushing the drive axle out of the wheel hub center, or pulling the hub off of the drive axle. OTC's new Universal Hub Puller delivers up to 20 tons of pressing power. Forged puller assembly coupled with a 1" drive screw applies large force without damaging components. Approved for use with an impact gun and can be struck with a hammer. 

Get Info Now

X-2511-SB Heavy Duty Stud Brush

Product From TRU-BALANCE Wheel Centering Products

With the patent-pending Tru-Balance X-2511-SB Heavy Duty Stud Brush, users can thoroughly clean wheel studs in minutes with just one pass. The open design of the tool allows for easy cleaning of the unit and the independent brushes can be rotated as needed for maximum brush life.As an added benefit users can remove one brush and use with a drill for cleaning wheel holes. There is no reverse rotation required of the drill. The brush collar ensures proper stability, positioning and performance. The hex drive is made for use with a cordless drill or air tool. The heavy duty replaceable brushes are made from stainless steel. 

Get Info Now

Bead Bazooka, No. BB06L

Product From Gaither Tool Company, Inc.

The Gaither Tool Bead Bazooka, No. BB06L, combines the unique rapid air release technology and easiest-to-handle tank for seating tubeless tire beads. Simply fill the tank, aim the redesigned double barrel and fire. The instantaneous blast of air from the 6L tank will work on truck (including super singles), passenger, motorcycle, ATV and small AG tires. A push-button trigger allows users to keep both hands on the tank for more control, making safer than manual release tanks. A "slotted" double barrel directs the air for best overall lift. Fully CE & ASME certified. Unit weighs about 12 lbs.

Get Info Now

13-piece Wheel Cover and Wheel Lock Removal Tool Kit, No. 30171

Product From Ken-Tool

Ken-Tool offers the 13-pc Wheel Cover and Wheel-Lock removal kit, No. 30171, for Ford, Chrysler and GM vehicles. These tools also covers standard and oversized OEM and aftermarket wheel locks for other domestic and imported cars and light trucks. The kit features a durable red blow-molded plastic case, and is used with a 1/2”-drive ratchet wrench.  The set includes 3/4”/19 mm and 7/8” Twist Sockets for removal of damaged lug nuts or oversized locks. An extractor punch is included to remove the lock from the socket. A 9-pc kit, No. 30170, is also available. 

Get Info Now

Truck Tire Inflator with Dial Gauge No. 65130

Product From S & G Tool Aid Corp.

S & G Tool Aid Corp. released the Truck Tire Inflator with Dial Gauge, No. 65130. The inflator features an extra long reach 14” dual head chuck with internal lock-on threads to inflate in both straight and offset positions. Ideal for use with heavy duty trucks, buses, RVs and motorhomes. Other features include:

Get Info Now