1117V MacPherson Strut Compression Vise Adapter

1117V MacPherson Strut Compression Vise Adapter

1117V MacPherson Strut Compression Vise Adapter Product Image

Baum offers their #1117V MacPherson Strut Compression Vise Adapter for mounting struts in a vise, which can help reduce shock and strut assembly and disassembling times.

Expand for more details on this Product

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Vise and Grinder Stand

Product From Herkules Equipment Corp.

The Herkules Equipment Corp. Vise and Grinder Stands can swivel up to 360 degrees and lock into position, allowing the vise or grinder to be placed into any position, and then moved out of the way when not in use. The Vise and Grinder Stand is available in a floor mount or a wall mount. The wall mount allows for mounting at any desired height. The floor mount is 34” high. The stand securely bolts to either the floor or a wall for stability, and has a 150-lb capacity. Any size vise or grinder can be attached to the 8" by 8" by 1/4" steel base plate.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

All Terrain Vise

Product From Wilton Tool Group

The Wilton ATV (All Terrain Vise) helps transform pickup trucks, utility trucks and SUVs into instant workstations.The Wilton ATV is a 33-lb combination vise and sleeve that slides into a standard 2” receiver, without interfering with the tailgate. The vise’s 6”-wide jaws open to 5-3/4” with a 5” throat depth. The vise has a clamping force of 1 ton. The ATV also is equipped with two sets of jaws (straight and V-groove), which are replaceable. The pipe jaws hold material up to 3” in diameter. The ATV’s overall dimensions are 19-1/4” length by 6” width by 7-1/4” height. The ATV is rated to 60,000 psi and can be used in construction, farm and ranch, automotive, marine or outdoor and off-road activities.

Get Info Now

Extra Long Air Hammer Pneumatic Drifts No. 11600

Product From SP Tools/Schley Products Inc.

The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including shock bolts and suspension arm bolts. These bolts are often too long for conventional pin punches or tapered drifts to push the bolt through a rusty bushing sleeve. 

Get Info Now

Premium Fiberglass Truck Wheel Weight Hammer

Product From Ascot Supply Co.

The Ascot Supply Co. Premium Fiberglass Truck Wheel Weight Hammer allows users to easily remove or install all types of lead, steel and zinc clip-on truck wheel weights and it is made with a fiberglass shaft for a lifetime of use. With comfort and ease of use in mind, the hammer comes with a slip-resistant and durable rubber ergonomic grip that reduces arm strain and fatigue. The wheel weight hammer also comes with new chromoly hooks designed for large truck weights and a longer handle that provides added reach for truck wheels. The extra large striking face of the hammer has a non-marring surface with a protective medium-hard replaceable tip.

Get Info Now

Powerbuilt Self Adjusting Oil Filter Pliers

Product From Alltrade Tools

The Powerbuilt Self Adjusting Oil Filter Pliers, from Alltrade Tools, automatically adjust to the size of the filter to be removed. These pliers allow for single-hand operation, performing three times faster than conventional filter pliers, according to the company. The uniquely designed mechanisms tighten as users turn the tool – the more users turn, the tighter the pliers grip. It is self-adjusting, simple to use and breaks loose stubborn oil filters with ease. The no-slip grip and padded dipped handles provide comfort so users can easily hold the tool. The opening size fits all filters, from 2-1/4” to 4-3/4”, conforming to any style of filter. Layered steel construction and serrated jaws provide greater durability and a tighter gripping force.

Get Info Now