Wolverine introduces flame resistant shirts

March 26, 2014
Garments are constructed with flame resistant fabric.

Wolverine has introduced two new styles of flame resistant shirts in versatile Twill and Ripstop materials. Both garments are flame resistant and are constructed with flame resistant fabric, meeting requirements specified in ASTM-F2302-8 for labeling protective clothing as flame resistant.

Flame resistant clothing, often worn by electricians who may be exposed to momentary electric arcs, must meet ASTM F1506, the standard performance specification for flame resistant and arc rated textile materials for wearing apparel for use by electrical workers exposed to momentary electric arc and related thermal hazards. Wolverine’s Flame Resistant clothing meets this standard.

This button-down style flame resistant shirt meets ASTM F1506 and OSHA 29 CFR 1910.269, and features:

•    Milliken amplitude flame resistant fabric

•    7 oz. Twill; 88 percent cotton, 12 percent high tenacity nylon FR twill

•    One chest pocket with button through closure and pencil slot opening

•    Locker loop on the back yoke with center back pleat allowing for additional range of motion

•    Triple needle topstitching for durability

•    Rolled shoulders for comfort

•    Extended shirt tail bottom and button down collar

•    Flame resistant Nomex thread and melamine buttons

•    Clearly labeled with a Wolverine FR label on the chest pocket, as well as a warning label on the lower right of the garment and a HRC2 label in chest pocket side seam

•    Available in sizes S-3XL

•    Available in grey, khaki, blue and navy

This button-down style flame resistant shirt meets ASTM F1506 and OSHA 29 CFR 1910.269, and features:

•    Milliken amplitude flame resistant fabric

•    6 oz., 88 percent cotton, 12 percent high tenacity nylon FR ripstop

•    Two chest pockets with flap and button through closure and pencil slot opening

•    Back yoke with side pleats for range of motion

•    Triple needle topstitching for durability

•    Rolled shoulders for comfort

•    Flame fesistant Nomex thread and melamine buttons

•    Extended shirt tail bottom and button down collar

•    Clearly labeled with a Wolverine FR label on the chest pocket, as well as a warning label on the lower right of the garment and a HRC1 label in chest pocket side seam

•    Available in sizes S-3XL

•    Available in grey, brown, khaki, blue and navy

Sponsored Recommendations

Snap-on Training: ADAS Level 2 - Component Testing

The second video for Snap-on's comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Intro to ADAS

Snap-on's training video provides a comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Guided Component Tests Level 2

The second video for Snap-on's comprehensive overview of Guided Component Tests, covering the fundamental concepts essential for diagnostic procedures.

Snap-on Training: Data Bus Testing and Diagnosis Part 1

Learn the basics of vehicle data buses and their diagnosis with Snap-on's Jason Gabrenas.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!