Wheel Monitor

Wheel Monitor

No image available.

Wheel Monitor is a R&D company dedicated to creating the technology necessary to ensure truck and trailer safety, and to enhance vehicle instrumentation, communications and fleet management. Our expertise includes sensors, data acquisition, embedded systems, vehicle communication protocols and heavy vehicle electronics. All of our products follow SAE standards development program for hardware, software, and environmental protection. Our ProductsThe Reverse-A-Matic™ trailer direction sensing system is a stand alone device that is independent of the cab. The Reverse-A-Matic™ system automatically locks and/or lifts a selfsteeraxle. The RM-60 Lift Axle function will also lift the forward axle when the four way flashers are activated and a speed is under 60 Km/H this transfer's weight onto the drive axles for increased traction during slippery uphill conditions. The Reverse-A-Matic™ system has an output, which will will turn on backup lights and/or beeper while reversing to add safety andconvenience.

  • 360 York Rd. Unit C4
  • Niagara-on-the-Lake, Ontario L0S 1J0
  • Canada
  • Phone: 905-641-0024
  • Toll Free:
  • Fax: 905-641-0038
  • Website: http://www.wheelmonitor.com

Want to know more about Wheel Monitor Get Info Now

Expand for more details on this Company

Axle Lift Device

Product From Wheel Monitor

Wheel Monitor's Balancer B150 is an electronic liftable axle control for lifting axles when not in use. This helps improve fuel economy and reduce annual maintenance costs. This axle lift device lifts and lowers axles automatically based on load weight. With a built-in axle load monitoring sensor, the B150 knows the number of axles to lift. It comes with an RS232/USB interface for computer set up.

Get Info Now

CTC-200- Cab & Trailer module

Product From Wheel Monitor

The CTC products provide standardized two-way communications between cab and trailer. These modules function under the SAE J-2497 "PLC4TRUCKS" Power Line Carrier using the Center Pin Wire J-560 Connector between cab and trailer. From the safety and comfort of the cab the operator has complete monitoringand control of:• Trailer ABS in dash fault light using "PLC4TRUCKS" protocol• Lift Axle function control and status• Trailer reverse lights and alarm (Also can be used for self steer lift & lock)• Trailer air brake tank reservoir pressure monitoring• Suspension slider control with in-cab indicator showing locked andunlocked position (CTC 400 only)• Auxiliary (Pid) for special fleet applications (CTC 400 only)

Get Info Now

Balancer B150

Product From Wheel Monitor

The Balancer B150 from Wheel Monitor is an electronic liftable axle control for lifting axles when not in use. It monitors the axle load weight and lifts automatically when the trailer is empty. It monitors how many axle are lifted and can control the lifting and lower points correctly. Easy computer setup can make the Balancer very easy to install.

Get Info Now

Reverse-A-Matic RM-60

Product From Wheel Monitor

With Fourway Flasher Control & Speed-lock Control The Reverse-A-Matic™ trailer direction sensing system is a stand alone device that is independent of the cab. The Reverse-A-Matic™ system automatically locks and/or lifts a selfsteer axle. The RM-60 Lift Axle function will also lift the forward axle when the four way flashers are activated and a speed is under 60 Km/H this transfer's weight onto the drive axles for increased traction during slippery uphill conditions. The Reverse-A-Matic™ system has an output, which will will turn on backup lights and/or beeper while reversing to add safety and convenience. The Reverse-A-Matic™ system monitor's trailer air tank pressure and warns of insufficient pressure with a light on the trailer. The Reverse-A-Matic™ offers the following beneficial functions: • Turns on the trailer backup lights. • Activates backup alarm system. • Inserts a steer axle's locking pin to secure it for straight operation above 60KM/H. • Lifts the traile

Get Info Now

Reverse-A-Matic RM-50

Product From Wheel Monitor

The Reverse-A-Matic™ RM-50 system combines functional value with trailer safety operations. The Reverse-A-Matic™ trailer direction sensing system is a stand alone device that is independent from the cab. The Reverse-A-Matic™ system automatically locks and/or lifts a self-steer or lift axle. The Lift Axle functions meet SPIF regulations for 3 & 4 axle trailers by removing control from the cab. The Reverse-A-Matic™ RM-50 system has a second output, which will turn on backup lights and/or beeper while reversing to add safety and convenience. By activating the back up lights on the trailer you can illuminate the path behind the trailer and warn others of your presence. Features • Turns on the trailer backup lights. • Activates backup alarm system. • Inserts a steer axle's locking pin to secure it for straight operation • Raises the trailer lift axle for easy maneuvering. Optional auxiliary functions: • Activates a dome light inside the trailer. • Chassis lights for night safety

Get Info Now

Proviso

Product From Wheel Monitor

The Proviso is an electronic lift axle control system for trailers. It lifts and locks in reverse like other Wheel Monitor products, but has automatic lift based on axle load weight. It has axle load weight sensitive and can be set to raise and lower the axle based on the trailer's load. It monitors the position of the lift axle and offers an in-cab light and lift axle switch for axle position monitoring and lift control. The Proviso has serial communications for trailer monitoring and remote inputs. Proviso can control the functions of liftable axles and steering lift axles and has speed sensitive functions for locking steer axles. The automatic lifting and/or locking of steering axles can save tire wear and mechanical wear of the axle. The Proviso can meet SPIF requirements and Alberta logging trailer requirements. The Proviso can be preset for easy installation and has tamperproof features. Functional Overview • Built-in axle load monitoring sensor • Lifts and lowers li

Get Info Now