MGM Brakes

MGM Brakes

No image available.
  • 8530 Cliff Cameron Dr
  • Charlotte, NC 28269
  • Phone: (704) 547-7411
  • Toll Free: (800) 527-1534
  • Fax: (704) 547-9367
  • Website: http://www.mgmbrakes.com

Want to know more about MGM Brakes Get Info Now

Expand for more details on this Company

Electronic Brake Monitoring for Air Disc Brakes

Product From MGM Brakes

MGM Brakes’ e.STROKE electronic brake monitoring system for air disc brake applications builds upon the company’s GEN 3 electronics, cabling and diagnostic software and adds a new optical sensing technology to monitor air disc pushrod stroke and caliper lever arm movement. The new GEN-3D system continuously monitors every brake apply and release and notifies braking problems via a dash warning light alerting the driver to a potential braking problem and a J-1939 real-time transmission of any fault condition which can be relayed via onboard data recording and reporting systems. By monitoring the braking system in real-time, the GEN-3D can detect non-functioning brakes, dragging brakes and over stroke brakes.

Get Info Now

Heavy Duty Spring Brakes

Product From MGM Brakes

MGM Brakes’ line of heavy duty spring brakes, featuring Corrosion Fighter Technology, is available in both standard and 3"-long stroke models for commercial vehicles worldwide. The new Corrosion Fighter guide is constructed from heavy duty, nonmetallic composite material, eliminating the electrical action between components, thus extending component life. These brakes also include MGM’s patented center hole diaphragm design, providing longer center seal and power spring life. These models are also available with optional neoprene diaphragms.

Get Info Now

Electronic Stroke Alert system

Product From MGM Brakes

The MGM Brakes Electronic Stroke Alert system converts air brake actuator shaft travel into an electronic signal. This signal is monitored and output transmitted to a Chassis Communications Module (CCM), providing the driver a safe and convenient means to check their brake stroke status.

Get Info Now

eStroke System

Product From MGM Brakes

The new eSTROKE system enables heavy vehicle service personnel to conduct quick, accurate brake stroke status checks. Sensors that are factory pre-installed and pre-calibrated as an integral part of MGM Brakes service chambers and spring brakes convert air-brake actuator shaft travel into an electronic signal. A Chassis Communications Module (CCM) monitors these signals and outputs wheel- specific blink codes. These reveal whether a brake chamber is experiencing normal stroke, overstroke, or is simply not functioning.

Get Info Now

Long Stroke Spring Brakes ' Service Chambers

Product From MGM Brakes

Chassis, etc. MGM Brakes Long Stroke Spring Brakes ' Service Chambers TR-LP3 ' LTR-L3 'Long Stroke' spring brake models offer performance benefits over standard stroke brake chambers for better lifetime value: 3.0" of stroke, greater reserve of stroke (1/2" more than 2.50" std. stroke models) meet or exceed worldwide industry safety standards and improved braking efficiency ' reduced out-of-adjustment incidents.

Get Info Now