- 6920 Seaway Blvd
- Everett, WA 98203
- Phone: 425-347-6100
- Toll Free:
- Website: http://www.fluke.com
Want to know more about Fluke Corporation Get Info Now
Company Profile | Request more information
Company Profile | Request More Information
Want to know more about Fluke Corporation Get Info Now
Expand for more details on this Company
The Fluke RLD2 will highlight refrigerant leaks if there is an IR dye in the refrigerant. The compact UV flashlight uncovers refrigerant leaks instantly with standard leak detection dyes available in the market. The RLD2 combines leak detection ability with a bright
The VT04 Visual IR Thermometer from Fluke works as an infrared troubleshooting tool with a built-in digital camera and thermal heat map overlay that bridges the gap between traditional IR thermometers and infrared cameras. Building on the VT02, the VT04 adds PyroBlend Plus technology which gives it four-times sharper resolution than the VT02. The tool displays and saves images as full digital, full infrared, or in three blended modes (25, 50, and 75 percent) with a 40 percent wider field of view than the VT02. It also features an automatic alarm function, so issues can be detected instantly with no training required.
Fluke's 233 wireless remote display digital multimeter with removable magnetic display allows a user to be 30' away from the measurement point. Users can place the removable display where they can read it and then place the meter separately in the most convenient location for using the device; no more juggling of leads and the meter while stretching into a tight spot. The multimeter measures up to 1,000V AC and DC and can complete resistance, continuity and diode testing. The radio transmitter automatically turns off when the display is connected to the meter. There is an easy-to-read display with large digits and bright backlight. Battery life lasts for approximately 400 hours.
When size is important, the Fluke Digital Multimeter, No. 81438, comes in handy. The tool features true-rms, AC V and current readings to 10 amp, 6,000-count resolution, min/max/average, frequency and capacitance capabilities. This compact multimeter gives users an easy-open battery access door and comes CAT III rated for 300V while being protected by a three-year warranty.
Accurate current measurements become more and more critical when troubleshooting electronic, and automotive circuits. The Fluke Low Amp Current Probe, No. 80i-110, is an AC/DC Current Probe designed to provide safe, high accuracy measurements for a wide range of applications. The specially designed built in safety features such as the 600 V rms rating at the input jaws, output cable, and banana jacks enhance work safety in automotive shop environments. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like ignition systems.
Fluke's VT02 Visual IR Thermometer, a troubleshooting camera with an infrared heat map, bridges the gap between low cost IR thermometers and higher priced thermal imagers. Use the VT02 to detect blockages in heater cores and cooling systems, diagnose automotive electrical issues and determine failed bearing components quickly without the use of other less-efficient tools. The tool combines the visual insight of a thermal imager, the visual images of a digital camera, and the point-and-shoot convenience of an IR (infrared) thermometer. It can display and save images as full visual, full infrared or in three blended modes (25, 50, and 75 percent), and comes with free Smartview software.
The Fluke 365 clamp meter gives technicians access to difficult-to-reach wires. The 365 has a thin, small, detachable jaw with a flexible lead, allowing access to wires and viewing the display easier than ever. The compact jaw measures current up to 200A AC/DC while allowing easy access to wires in PLCs and other tight spaces. The Fluke 365 measures up to 600V AC and DC, and provides 6000-Ohm resistance measurement and continuity detection. Signal processing allows for use in noisy electrical environments, while providing stable readings.
Fluke Corporation introduces the high-performance, affordable Ti9 Thermal Imager, that is ideal for troubleshooting electrical problems. The Fluke Ti9 delivers crisp, clear images on a large widescreen full-VGA-color LCD display. It features a thermal sensitivity range 0.20 to 30 degrees C target temperature (200 mK), to identify even small temperature differences that could indicate problems. The Ti9 includes an intuitive three-button menu, and comes complete with a 2GB SD memory card, multi-function memory card reader, rechargeable internal battery, AC charger/power supply, adjustable hand strap, soft carrying case and a rugged hard carrying case.
Fluke's 1551A and 1552A “Stik” thermometers provide the measurement accuracy, durability and safety required for industries such as oil and gas production and petrochemicals—with no mercury hazard. The Fluke 1551A “Stik” thermometer features a thin-film RTD sensor that provides repeatable accuracy of + 0.09 degrees F over its full range from –58 degrees F to 320 degrees F. A stainless steel sheath protects the sensor, making it much more rugged than the glass stems of mercury thermometers, so they are much better suited for challenging environments.
Fluke Corp.'s TL175 TwistGuard Test Leads, include a manually adjustable test tip guard for use in different measurement environments. By simply twisting the test lead the user can change the exposed probe tip length from 4/25" (4 mm) to 3/4" (19 mm). These test leads have earned CAT II, CAT III and CAT IV safety ratings, and also come with WearGuard insulation. Each test lead is covered by two layers of silicone insulation: red or black on the outside, and white on the inside.