Electronic Specialties, Inc.

Electronic Specialties, Inc.

electronicspecialties_10095538.png

Manufacturer of testing instruments since 1967. 45 years experience in developing award winning products designed for the professional technician.

  • 139 Elizabeth Ln.
  • Genoa City, WI 53128
  • USA
  • Phone: 262-279-1400
  • Toll Free: 800-227-1603
  • Fax: 262-279-1300
  • Website: http://www.esitest.com

Want to know more about Electronic Specialties, Inc. Get Info Now

Expand for more details on this Company

Self-Calibrating True RMS DMM, No. 485

Product From Electronic Specialties, Inc.

The Electronic Specialties Self-Calibrating True RMS Digital Multimeter, No. 485, features a patented self-calibration function. Once the self-calibration function is turned on, the multimeter will proceed to manipulate the internal resistor network, which ensures accuracy and minimizes the affects of temperature accuracy drift. With true RMS accuracy and completely auto-ranging, the 485 features a 6,000-count LCD display, a min/max function and built-in temperature reading in F or C. The 485 offers 10 MegOhm input impedance for safe use on any automotive electrical system. This tester is fuse- and overload-protected and comes with a one-year warranty. The unit comes with 40” test leads, temperature probe, installed battery and instruction manual and a one-hour training DVD.

Get Info Now

Test Leads with Screw-off Aligator Clips, No. 629

Product From Electronic Specialties, Inc.

The Electronic Specialties Test Leads with Screw-off Alligator Clips, No. 629, are designed to work with most DMM’s currently in use. Connection to the multimeter is made via industry standard, right-angle shielded banana plugs. The alligator clips screw on and off so that, when desired, the test lead can be clamped permanently to the test point. This frees hands for other tasks, like wiggle testing and other diagnostic troubleshooting. The test leads are 48" and and CATIII 1,000V safety rated. The maximum test current is 10 amps. 

Get Info Now

Heavy Duty Insulation Piercing Test Clips, No. 142-3

Product From Electronic Specialties, Inc.

The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently in use. They will connect to the main test lead in the kit via straight banana plug connection. These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible. After use, special care should be taken to seal the point where the wire was pierced.These probes feature CATIII 1000V safety rating. The maximum test current is 5 amps.

Get Info Now

688 True RMS Low Current Clamp Meter

Product From Electronic Specialties, Inc.

The Electronic Specialties 688 True RMS Low Current Clamp Meter feature a 3/4" clamp opening, which allows clamping over heavy duty ground cables and some multiple ground cable systems. The larger clamp will permit a wider range of use across heavy duty vehicles. This clamp meter has improved the drift on DC amps readings, and it has a built-in full range Digital Multimeter for true RMS accuracy. The clamp meter measures DC/AC volts, ohms, frequency, capacitance, diodes, continuity and temperature in F and C. Multimeter test leads, temperature probe and zippered carrying case are included. 

Get Info Now

Code Buddy PRO No. 903

Product From Electronic Specialties, Inc.

The Electronic Specialties Code Buddy PRO, No. 903, works with all 1996 and later OBDII/CAN-compliant vehicles. This compact and easy-to-use code scanner with live data and diagnostic monitors can can display the full live data stream, giving valuable feedback while the vehicle’s engine is running. The 903 also displays Mode 6 diagnostic monitors status, which can help find borderline problems and intermittent codes, and displays O2 sensor test data. Should the vehicle set a hard trouble code, Freeze Frame Data can also be viewedl. Further capabilities include displaying I/M, emissions readiness status and MIL status. The 903 will display the VIN numbers and calibration IDs of 2002 and newer vehicles supporting Mode 9.

Get Info Now

Shielded Relay Adapter Kit, No. 190-4

Product From Electronic Specialties, Inc.

Electronic Specialties' Shielded Relay Adapter Kit, No. 190-4, includes three relay adapters for use with 190 Relay Buddy tester. These three adapters permit testing of shielded style relays, which could not be tested previously with the Relay Buddy. The adapter plugs into the Relay Buddy tester first, then the relay plugs into the adapter. From there, normal testing procedures can be followed.  

Get Info Now

Battery Starting/Charging System Analyzer No. 725

Product From Electronic Specialties, Inc.

The Electronic Specialties Battery Starting/Charging System Analyzer, No. 725, can test critical electrical components on a vehicle. Using its positive and negative clamps, simply connect to the battery posts accordingly. From the menu, choose the battery or starting/charging test. The menu walks the user through choosing battery type and CCA rating. The tool tests the battery in two seconds, calculating battery life and evaluating if the battery is "good," "bad," "good & recharge" or "recharge & retest."

Get Info Now

Relay Adapter Kit, No. 190-5

Product From Electronic Specialties, Inc.

The Relay Adapter Kit, No. 190-5, from Electronic Specialties includes two relay adapters for use with 190 Relay Buddy tester. These two adapters permit testing of two new relay types commonly used on fuel pumps and other powered devices. The adapter plugs into the Relay Buddy tester first, then the relay plugs into the adapter. From there, normal testing procedures are followed. This kit can be used with the 190 Relay Buddy in order to increase testing coverage, or a complete kit with all the available adapters, the No. 191, can be purchased.

Get Info Now

Relay Buddy Pro Test Kit, No. 191

Product From Electronic Specialties, Inc.

Electronic Specialties' Relay Buddy Pro Test Kit, No. 191, includes five newly developed relay adapters and a tester, in a blowmold case. Three of the adapters make possible testing of shielded relays while the other two adapters permit testing of two new relay types commonly used on fuel pumps and other powered devices. The tool

Get Info Now

Fuse Lead Automotive DMM Test Leads No. 134

Product From Electronic Specialties, Inc.

The Electronic Specialties Fuse Lead (No. 134) is a standard test lead set, but with the added feature of the ATO fuse holder. This unit helps prevent a digital multimeter's internal fuse from blowing and provides extra overload protection. With Fuse Lead, this in-line fuse holder serves two purposes: to provide extra overload protection and safety for the user and the measuring instrument; and in the event of overload, the ATO fuse blows before the internal multimeter fuse blows. To avoid taking apart a multimeter with a blown fuse, and replacing the potenitally expensive fuse, the Fuse Lead allows users to avoid this sometimes time-consuming task. 

Get Info Now